
NanoLogger
TobiasNetzer/nanoLogger
Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.

Mainboard for automated SMT Feeder system
MiniFeedMaster is an open-source printed circuit board by SG-O, from the SG-O/MiniFeedMaster repository on GitHub, published under the CC-BY-4.0 licence. It is a 2-layer board of 58.4 × 83.2 mm with 141 parts on 76 nets, routed with 957 tracks and 450 vias.
It is built around the STM32F105RXTX, TPS82140SIL and SN6505BDBV, with the USBLC6-2SC6, ISO1044 and ISO1541D among its other parts. Its parts include 54 capacitors, 36 resistors, 11 ICs, 9 connectors and 7 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C10, C11, C14, C15, C17, C19, C21, C23, C24, C26, C27, C30, C31 +11 |
| 18 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C16, C18, C20, C22, C25, C28, C29, C35, C39, C40, C41, C42, C44, C47, C48 +2 |
| 14 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R5, R10, R21, R26, R27, R28, R29, R30, R32, R34, R35 |
| 6 | 1k5 | Resistor_SMD:R_0805_2012Metric | R6, R15, R16, R24, R25, R36 |
| 5 | Fiducial_1mm_Mask2mm | Fiducial:Fiducial_1mm_Mask2mm | Fid1, Fid2, Fid3, Fid4, Fid5 |
| 3 | 150k | Resistor_SMD:R_0603_1608Metric | R17, R19, R31 |
| 3 | 47u | Capacitor_SMD:C_2220_5650Metric | C36, C37, C38 |
| 3 | 5k1 | Resistor_SMD:R_0603_1608Metric | R9, R13, R14 |
| 3 | RED | LED_SMD:LED_0603_1608Metric | D1, D6, D7 |
| 3 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6, U10, U11 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R18, R33 |
| 2 | 10u 50V | Capacitor_SMD:C_1210_3225Metric | C32, C33 |
| 2 | 22R | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 27p | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | MBR0520L | Diode_SMD:D_SOD-123 | D2, D3 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 150R | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 15k8 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 1:2.1 | global:TOROID_SMD_6PIN_(1109) | TR1 |
| 1 | 220p | Capacitor_SMD:C_0603_1608Metric | C34 |
| 1 | 25MHz ±10ppm 20pF 40Ω | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2n2 | Capacitor_SMD:C_0603_1608Metric | C43 |
| 1 | 309k | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 33u | global:Inductor10x10mm | L1 |
| 1 | 600R_2A | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | BOOT0 | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Button | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW1 |
| 1 | CAN | global:TerminalBlock_KaiFeng_KF141R-3_1x03_P2.54mm | J2 |
| 1 | Chain | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Horizontal | J6 |
| 1 | DNP | global:FIL_ACT45B-510-2P-TL003 | FL1 |
| 1 | END | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | JP2 |
| 1 | ESDCAN24 | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | EXT | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J9 |
| 1 | Feeder | global:PogoEdgeConnector | J5 |
| 1 | I2C | global:TerminalBlock_KaiFeng_KF141R-4_1x04_P2.54mm | J8 |
| 1 | ISO1044 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | ISO1541 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | ISO6721 / ISO7721 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | LMR16020 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U7 |
| 1 | LOGO | global:BY | G*** |
| 1 | LOGO | global:Logo_SG-O | G*** |
| 1 | LOGO | global:CC | G*** |
| 1 | Reset | Button_Switch_SMD:SW_SPST_SKQG_WithStem | SW2 |
| 1 | SN6505B | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | SS2P4HM3 | global:DO-220AA | D5 |
| 1 | STM32F105Rx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinSocket_1.27mm:PinSocket_1x06_P1.27mm_Vertical | J1 |
| 1 | TPS76350 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | TPS82140 | Package_LGA:Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias | U8 |
| 1 | UART | global:TerminalBlock_KaiFeng_KF141R-4_1x04_P2.54mm | J3 |
| 1 | USB | global:HRO-TYPE-C-31-M-12-Assembly | J4 |
| 1 | VIn | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J7 |
The 134 most common of 141 parts.
It measures 58.4 × 83.2 mm and has 2 copper layers, 1.6 mm thick.
141 parts, built around the STM32F105RXTX, TPS82140SIL, SN6505BDBV and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the SG-O/MiniFeedMaster repository on GitHub, at the commit this page was made from: the board is MiniFeedMaster.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

TobiasNetzer/nanoLogger
Here is a simplified block diagram of the data logger. To measure the current of a device, the data logger is simply connected in series between the voltage source and the DUT/load.

har-in-air/ESP32_WROVER_BREAKOUT
Breadboard compatible breakout PCB for ESP32-WROVER with TPS82140 power supply

oxidecomputer/hw-gimletlet
More full-featured breakout board for the STM32H7, including many expansion headers for daughter boards. In active use for Hubris development and as a Swiss Army Knife around the lab



fl4p/dcdc-parasitics
KiCad → FastHenry extractor for half-bridge power-stage parasitics (commutation-loop L, common-source inductance, gate-loop L/R) → SPICE subckt + SVG schematic

