2 layers110 × 70 mm
2 layers200 × 100 mm
Amp600w
mx-yah/amp600w6A high-performance high-power class-D amplifier that enables true premium sound quality with high-efficiency class-D technology
- Size
- 200 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 133
- Nets
- 63
- Pads
- 391
- Tracks, vias
- 819, 360
- Pours
- 27
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Nov 2020
- Updated
- 6 Apr 2021
Overview
Amp600w is an open-source printed circuit board by mx-yah, from the mx-yah/amp600w repository on GitHub. It is a 2-layer board of 200 × 100 mm with 133 parts on 63 nets, routed with 819 tracks and 360 vias.
It is built around the TL072, TPA3255DDV and LM1117-3.3, with the SMBJ10CA, IRF9540NSTRLPBF and IRLML9303 among its other parts. Its parts include 53 capacitors, 44 resistors, 7 ICs, 5 inductors and 3 transistors.
Main components
8
TL072
SOP-8-18V~18V 0℃~+70℃ 1.4mA 1.5nA 10V/us 10mV 2 2.5nA 3MHz 85dB SOP-8 Operational Amplifier ROHSGcoreOperational Amplifier
TPA3255DDV
HTSSOP-44-EP-6.1mmAutomatic mute/no-noise switch、Overvoltage protection HTSSOP-44-EP-6.1mm Audio Amplifiers ROHSTexas InstrumentsAudio Amplifiers
LM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
SMBJ10CA
DO-214AA(SMB)-65℃~+150℃ 10V 12.3V 17V 35.3A 5uA 600W Bidirectional TVS DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)
IRF9540NSTRLPBF
D2PAK-55℃~+150℃ 1 P-Channel 1.45nF 100V 110nC@10V 117mΩ@10V 230pF 23A 3.1W 430pF 4V P-Channel D2PAK MOSFETs ROHSInfineon TechnologiesMOSFETs
IRLML9303
SOT-23MOSFETsLeiditechMMBT5401
SOT-23-55℃~+150℃ 1 PNP 100MHz 100nA 150V 300 300mW 500mV 5V 600mA PNP SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
SS510
SMA(DO-214AC)-55℃~+150℃ 100V 1mA@100V 5A 850mV@5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdHigh-efficiency 600W sound amplifier
A high-performance high-power class-D amplifier that enables true premium sound quality with high-efficiency class-D technology
Based on the TPA3255DDV integrated circuit from Texas Instruments.
Parts
133| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R6, R12, R13, R16, R18, R19, R31, R43, R46, R49 |
| 10 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C10, C11, C26, C30, C36, C37, C38, C40 |
| 9 | 1uF 100V | Capacitor_SMD:C_1210_3225Metric | C15, C16, C24, C25, C32, C50, C51, C52, C53 |
| 9 | 22uF 25V | Capacitor_SMD:C_1210_3225Metric | C17, C33, C39, C41, C42, C43, C44, C45, C46 |
| 6 | 1R | Resistor_SMD:R_1812_4532Metric | R36, R37, R38, R39, R40, R41 |
| 6 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R15, R20, R21, R28, R29 |
| 6 | 3.3 | Resistor_SMD:R_1206_3216Metric | R1, R4, R5, R7, R11, R44 |
| 5 | 2200uF 63V | Capacitor_THT:CP_Radial_D18.0mm_P7.50mm | C5, C6, C7, C8, C9 |
| 4 | 0.033uF | Capacitor_SMD:C_0603_1608Metric | C4, C28, C29, C34 |
| 4 | 10uH 20A | Inductor_THT:L_Toroid_Vertical_L33.0mm_W17.8mm_P12.70mm_Pulse_KM-5 | L1, L2, L3, L4 |
| 4 | 1uF 16V | Capacitor_SMD:C_0603_1608Metric | C18, C19, C27, C31 |
| 4 | 1uF 250V | Capacitor_THT:C_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3 | C12, C21, C48, C49 |
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric | R14, R17, R22, R45 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R23, R24, R27 |
| 3 | SMBJ10CA | Diode_SMD:D_SMB | VD2, VD3, VD4 |
| 3 | TL072 | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U3, U4, U5 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R10, R25 |
| 2 | 10nF 100V | Capacitor_SMD:C_0805_2012Metric | C14, C23 |
| 2 | 1nF 100V | Capacitor_SMD:C_1206_3216Metric | C13, C22 |
| 2 | LED | LED_THT:LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm | HL2, HL3 |
| 1 | *** | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 0.047uF | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C47 |
| 1 | 100uH 2A | Inductor_SMD:L_12x12mm_H8mm | L5 |
| 1 | 10k LIN | Potentiometer_THT:Potentiometer_Piher_T-16H_Single_Horizontal | RV1 |
| 1 | 10кОм 3455K | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R47 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R42 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 3300pF | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | 470uF 16V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 75k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | Audio Output | mx_pcb_lib:TerminalBlock_Degson_DG25C-B_P7.62mm | X4 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_Switronic_ST-005-G_horizontal | J1 |
| 1 | Conn_04 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | X7 |
| 1 | Heatsink | mx_pcb_lib:HEATSINK_LGA1156 | HS1 |
| 1 | IRF9540NSTRLPBF | Package_TO_SOT_SMD:TO-263-2 | Q3 |
| 1 | IRLML9303 | Package_TO_SOT_SMD:SOT-23 | Q6 |
| 1 | Jumper_NO_Small | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | LED | LED_THT:LED_D3.0mm | HL1 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LM2596HVS-ADJ, LM2596HV-12 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U7 |
| 1 | MMBT5401 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | NE5532ADR | Package_SO:SO-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Net-Tie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1 |
| 1 | Power | mx_pcb_lib:TerminalBlock_Degson_DG25C-B_P7.62mm | X3 |
| 1 | SS510 | Diode_SMD:D_SMC | VD1 |
| 1 | TPA3255 | mx_pcb_lib:TPA3255DDV | U6 |
| 1 | XLR3_Ground | Connector_Audio:Jack_XLR_Neutrik_NC3FAH2_Horizontal | J2 |
Questions
How big is the Amp600w PCB?
It measures 200 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Amp600w use?
133 parts, built around the TL072, TPA3255DDV, LM1117-3.3 and SMBJ10CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Amp600w KiCad files?
From the mx-yah/amp600w repository on GitHub, at the commit this page was made from: the board is amp600w.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Amp600w design in my own project?
Its repository states no licence, so its author keeps all rights: ask mx-yah before reusing the design.
Similar boards
- 2 layers111.5 × 101 mm
MACHIP3.0
brgyplrm/MaChip
This directory contains the official KiCad 8/10 hardware design files, production Gerbers, bill of materials (BOM), and assembly guides for the MACHIP 3.0 Access Control Terminal.
76 parts1 - 4 layers53 × 85 mm
- 2 layers91.6 × 73.5 mm
Controller board
borzeman/PzbElectronics
Репозиторий для поддержки версионирования при разработке плат для киоска.
138 parts - 2 layers110 × 90 mm
Atlas agent ctrl
md-sazzad-eee/ATLAS
Modular multi-robot system: a carrier robot that docks, transports, charges and redeploys two small agent robots. KiCad, FreeCAD, MATLAB/Simulink, COMSOL and ESP32 firmware.
112 parts - 4 layers140 × 90 mm
TPA3255PBTL
EliMattingly22/TPA3255_ClassD_PBTL
A KiCAD project for the TPA3255 amplifier in PBTL mode
140 parts15MIT - 2 layers129.8 × 82 mm
- 4 layers121 × 40 mm
PowerAmplifier
BlockWorker/ModularAudio
Compact, modular, versatile, hi-fi audio system concept.
156 parts2