Skip to the content
4 layers92.2 × 44 mmKarabas megabuzz, the printed circuit board in 3D

A minimalistic FPGA soundcard for ZX Spectrum

Size
92.2 × 44 mm
Copper layers
4
Thickness
1.6 mm
Parts
177
Nets
330
Pads
905
Tracks, vias
2,372, 366
Pours
7
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Apr 2026
Updated
19 Oct 2026

Overview

Karabas megabuzz is an open-source printed circuit board by andykarpov, from the andykarpov/karabas-megabuzz repository on GitHub, published under the MIT licence. It is a 4-layer board of 92.2 × 44 mm with 177 parts on 330 nets, routed with 2,372 tracks and 366 vias.

It is built around the SAM2695, 74AHCT1G125DBV and SN74LV1T34DBV, with the W25Q128JVSIQ, SN74CB3T3245PW and PCM5102APW among its other parts. Its parts include 55 capacitors, 46 resistors, 16 ICs, 16 diodes and 5 connectors. It belongs with the fPGA and programmable logic and retro computing and games boards and the FPGA and CPLD boards of this library.

Main components

6

README

README.md

Karabas-MegaBuzz

Simple FPGA based sound card for ZX Spectrum (NemoBus). Inspired by a ZX-Multisound and karabas-opl3 soundcards :)

photo

photo

Tech specs

  • Turbosound FM
  • General Sound 2 MB
  • OPL3 sound by YMF-262-M
  • MIDI by Dream SAM2695
  • SAA1099
  • Soundrive, Covox + Beeper
  • MP3, OGG, WMA, AAC decoding by VS1053/VS1063
  • 16-bit DAC PCM5102
  • XC6SLX16 / XC6SLX25 FPGA
  • SD Card by Z-Controller / DivMMC (since rev.A1)
  • Low profile PCB: 92x44mm
  • 5V only power required

Changelog & current status ERRATA

  • Rev.A - initial release

  • Rev.A1 - intermediate revision

    • Added SD card
    • Changed OPL3 chip power to 3v3 rail, reset controlled by FPGA
    • Added NMI button
    • Added SD LED
    • Added PSRAM chip
    • Added new signals to grab and emit on nemobus (NMI, ROMCS)
    • Added ability to pass sound out via nemobus slot
  • Rev.A2 - current revision

    • Removed DIP switches
    • Added 128kB SRAM chip for DivMMC
    • Added 8kb EEPROM chip to store configuration
  • Rev.A3 - current dev version

    • Added VS1053 IC

How-to & Documentation

Please read the manual how to flash your card with alt tools, like Altera Usb Blaster + openocd.

Some links to the documentation files:

Bitstreams & ROMs to flash into the SPI flash chip

Board RevisionFPGA XC6SLX16FPGA XC6SLX25
Rev.A• (Bitstream)
• (GS ROM)
• (CFG)
• (Bitstream)
• (GS ROM)
• (CFG)
Rev.A1• (Bitstream)
• (GS ROM)
• (CFG)
• (Bitstream)
• (GS ROM)
• (CFG)
Rev.A2• (Bitstream)
• (GS ROM)
• (CFG)
• (Bitstream)
• (GS ROM)
• (CFG)
Rev.A3• (Bitstream)
• (GS ROM)
• (CFG)
• (Bitstream)
• (GS ROM)
• (CFG)

Related projects

Parts

177
QtyValueFootprintReferences
28100nCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C2, C3, C4, C11, C13, C14, C15, C17, C21, C22, C23, C28, C32, C37, C39 +12
191kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR17, R18, R21, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42 +3
18TestPointTestPoint:TestPoint_Pad_D1.5mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18 +2
1110kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R46
1110uCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC16, C18, C19, C20, C27, C30, C31, C35, C42, C50, C52
827Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R13, R14, R15, R16, R22, R25, R26
8GREENLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD2, D3, D4, D5, D10, D11, D12, D13
4100nCapacitor_SMD:C_0603_1608MetricC6, C8, C10, C12
42n2Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC25, C26, C36, C38
42u2Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC24, C29, C33, C34
4470Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR19, R20, R23, R24
4SN74CB3T3245PWPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU4, U5, U6, U7
4YELLOWLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD6, D7, D14, D15
30Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR27, R28, R29
322uCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-A_HandSolderC47, C51, C53
21117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U13, U14
2BLUELED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD1, D9
2REDLED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolderD8, D16
1100u/16VCapacitor_SMD:CP_Elec_6.3x7.7C41
11117-1.2Package_TO_SOT_SMD:SOT-223-3_TabPin2U15
11uHInductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolderL1
147kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR12
150 MHzOscillator:Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mmX1
15V_PRGConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ5
174AHCT1G125DBPackage_TO_SOT_SMD:SOT-23-5_HandSolderingU3
1CY62167EV30LLPackage_SO:TSOP-I-48_18.4x12mm_P0.5mmU12
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ4
1Conn_02x30_Row_Letter_Firstmy:ZX_NEMO_60_EDGEJ2
1FPGA JTAGConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_VerticalJ1
1FlashJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1PCM1808PWRPackage_SO:TSSOP-14_4.4x5mm_P0.65mmU11
1PCM5102APackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU10
1PJ307Connector_Audio:Jack_3.5mm_CUI_SJ1-3525N_HorizontalJ3
1Resetfootprints:SW_SPST_PTS810_handsolderingBTN1
1SAM2695Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mmU9
1SN74LV1T34DBVPackage_TO_SOT_SMD:SOT-23-5_HandSolderingU22
1SW_DIP_x05Button_Switch_THT:SW_DIP_SPSTx05_Slide_6.7x14.26mm_W7.62mm_P2.54mm_LowProfileSW1
1W25Q128JVSPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU2
1XC6SLX25-FTG256Package_BGA:BGA-256_17.0x17.0mm_Layout16x16_P1.0mm_Ball0.5mm_Pad0.4mm_NSMDU1
1YMF262-Mfootprints:ymf-262-mU8
1graphicfootprints:andy_karpov_logo4_silkLOGO2

The 162 most common of 177 parts.

More from andykarpov/karabas-megabuzz

1
  • 4 layers92.2 × 44 mmKarabas megabuzz, the printed circuit board in 3D

    Karabas megabuzz

    andykarpov/karabas-megabuzz

    A minimalistic FPGA soundcard for ZX Spectrum

    176 parts9MIT

Similar boards

  • 2 layers170 × 64 mmZx multisound, the printed circuit board in 3D

    Zx multisound

    UzixLS/zx-multisound

    ZX Spectrum soundcard for NEMOBUS/ZXBUS

    200 parts40MIT
  • 4 layers56 × 87.8 mmPicogus104, the printed circuit board in 3D

    Picogus104

    UzixLS/picogus104

    PicoGUS sound card for PC/104 interface

    114 parts23
  • 4 layers70 × 69.8 mmKarabas mini, the printed circuit board in 3D

    Karabas mini

    andykarpov/karabas-mini-pcb

    Karabas Go Mini PCB

    222 parts2
  • 2 layers100 × 100 mmMist1010, the printed circuit board in 3D

    Mist1010

    UzixLS/mist1010-board

    10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

    273 parts43MIT
  • 2 layers59 × 106.7 mmYarns v03, the printed circuit board in 3D

    Yarns v03

    jonstapleton/mutable_eurorack

    Eurorack modules

    118 parts
  • 4 layers102.9 × 96.7 mmPicoGUS chipdown, the printed circuit board in 3D

    PicoGUS chipdown

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    99 parts805
  • 2 layers75 × 56 mmGba cart read rp2350, the printed circuit board in 3D

    Gba cart read rp2350

    Daft-Freak/gba-cart-read

    Reads GBA cartridges as a USB storage device. TODO: more interesting name.

    49 parts7

Questions

How big is the Karabas megabuzz PCB?

It measures 92.2 × 44 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Karabas megabuzz use?

177 parts, built around the SAM2695, 74AHCT1G125DBV, SN74LV1T34DBV and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Karabas megabuzz KiCad files?

From the andykarpov/karabas-megabuzz repository on GitHub, at the commit this page was made from: the board is pcb/revA/karabas-megabuzz.kicad_pcb and its schematic pcb/revA/audio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Karabas megabuzz design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).