2 layers24.9 × 24.9 mm
2 layers24.9 × 24.9 mm
MTCH101 Disc
clothbot/ClothBotCreations42Original creations for demos & workshops.
- Size
- 24.9 × 24.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 17
- Pads
- 87
- Tracks, vias
- 69, 0
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Jul 2013
- Updated
- 25 Oct 2017
Overview
MTCH101 Disc is an open-source printed circuit board by clothbot, from the clothbot/ClothBotCreations repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 24.9 × 24.9 mm with 27 parts on 17 nets, routed with 69 tracks and 0 vias.
Its parts include 6 resistors, 4 connectors, 1 capacitor, 1 IC and 1 diode.
README
README.mdClothBotCreations
Original creations for demos & workshops.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Resistors_SMD:R_0603_HandSoldering | R1, R2 |
| 2 | 10k | Resistors_SMD:R_0603 | R4, R5 |
| 1 | 0.1u | Capacitors_SMD:C_0603 | C1 |
| 1 | 1k | Resistors_SMD:R_0603 | R6 |
| 1 | 4.7k | Resistors_SMD:R_0603 | R3 |
| 1 | LED | LEDs:LED_1206 | D1 |
| 1 | MTCH101_PKG | TO_SOT_Packages_SMD:SOT-23-6 | U1 |
| 1 | TEST_MTPM | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | W6 |
| 1 | TST1 | Connect:PINHEAD1-2 | P1 |
| 1 | TST1A | buttons:sew_1x2 | W7 |
| 1 | TST1B | buttons:sew_1x2 | W8 |
| 1 | TST2 | Connect:PINHEAD1-2 | P2 |
| 1 | TST2A | buttons:sew_2x2 | W9 |
| 1 | TST2B | buttons:sew_2x2 | W10 |
| 1 | TST3 | Connect:PINHEAD1-2 | P3 |
| 1 | TST3A | buttons:lego_1x2 | W11 |
| 1 | TST3B | buttons:lego_1x2 | W12 |
| 1 | TST4 | Connect:PINHEAD1-2 | P4 |
| 1 | TST4A | buttons:lego_2x2 | W13 |
| 1 | TST4B | buttons:lego_2x2 | W14 |
| 1 | gnd | buttons:sew_1x2 | W2 |
| 1 | out | buttons:sew_1x2 | W4 |
| 1 | sa | buttons:sew_1x2 | W3 |
| 1 | sns | buttons:sew_1x2 | W1 |
| 1 | vdd | buttons:sew_1x2 | W5 |
More from clothbot/ClothBotCreations
1Similar boards
- 2 layers47.6 × 27.3 mm
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223
Questions
How big is the MTCH101 Disc PCB?
It measures 24.9 × 24.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MTCH101 Disc use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MTCH101 Disc KiCad files?
From the clothbot/ClothBotCreations repository on GitHub, at the commit this page was made from: the board is wearables/kicad/MTCH101_Disc.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MTCH101 Disc design in my own project?
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).