2 layers
4 layers94 × 94 mm
Zynq test board
anuejn/2d542reverse engineering the canon 5D mark II (5D2) image sensor
- Size
- 94 × 94 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 206
- Nets
- 237
- Pads
- 760
- Tracks, vias
- 1,877, 226
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Oct 2023
- Updated
- 27 May 2025
Overview
Zynq test board is an open-source printed circuit board by anuejn, from the anuejn/2d5 repository on GitHub. It is a 4-layer board of 94 × 94 mm with 206 parts on 237 nets, routed with 1,877 tracks and 226 vias.
It is built around the HMCAD1511, ISO1541D and 3296W-1-104, with the SS34 and SMMS0630-100M among its other parts. Its parts include 110 resistors, 64 capacitors, 16 ICs, 3 diodes and 1 inductor. It belongs with the sensors and measurement and fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
5
HMCAD1511
QFN-48-EP(7x7)-40℃~+85℃ 0.5LSB 1.7V~2V 1GHz 4 8 Serial port QFN-48-EP(7x7) Analog to Digital Converters (ADC) ROHSAnalog DevicesAnalog To Digital Converters (ADC)
ISO1541D
SOIC-8-40℃~+125℃ 2500 50kV/us Bidirectional Open-drain buffer output SOIC-8 I2C Isolators ROHSTexas InstrumentsI2C Isolators
3296W-1-104
插件-3P,9.5x4.9mm100kΩ 30 500mW ±10% ±250ppm/℃ 插件-3P,9.5x4.9mm Potentiometers, Variable Resistors ROHSBOCHENPotentiometers & Variable Resistors
SS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
SMMS0630-100M
SMD,7.3x6.6mm10uH 4.5A 5.5A 68mΩ Molded Inductor ±20% SMD,7.3x6.6mm Molding Power Inductors ROHSSXNPower Inductors
README
boards/zynq-test-board/README.mdzynq test board
This board is a "cape" for the z-turn litezynq SBC and should serve as a development basis for interfacing the sensor. It features an HMCAD1511TR as ADC and appropriate power-supplies. Otherwise it does very little.
Parts
206| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R63, R64, R65, R66, R67, R68, R69, R70, R71, R72, R73, R74, R75, R76, R77, R78 +16 |
| 29 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C2, C10, C15, C17, C18, C23, C25, C26, C31, C33, C34, C36, C37, C43, C45, C46 +13 |
| 19 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R11, R19, R27, R35, R44, R48, R59, R60, R61, R62, R95, R108, R109, R110 +3 |
| 15 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6, C8, C14, C16, C22, C24, C30, C32, C35, C42, C44, C47, C49 |
| 12 | 10 | Resistor_SMD:R_0603_1608Metric | R13, R14, R21, R22, R29, R30, R37, R38, R46, R47, R51, R52 |
| 11 | 4k7 | Resistor_SMD:R_0603_1608Metric | R53, R54, R99, R100, R101, R102, R103, R104, R105, R106, R107 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric | C11, C12, C19, C20, C27, C28, C61, C62 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric | R17, R18, R25, R26, R33, R34, R57, R58 |
| 8 | 22 | Resistor_SMD:R_0603_1608Metric | R15, R16, R23, R24, R31, R32, R55, R56 |
| 7 | 10u | Capacitor_SMD:C_0805_2012Metric | C39, C40, C41, C48, C52, C53, C58 |
| 6 | 100k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV2, RV3, RV4, RV5, RV6, RV7 |
| 6 | 10m | Resistor_SMD:R_0603_1608Metric | R12, R20, R28, R36, R45, R50 |
| 6 | INA226 | Package_SO:VSSOP-10_3x3mm_P0.5mm | U4, U6, U8, U10, U13, U16 |
| 6 | MCP1727-ADJxSN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U3, U5, U7, U9, U12 |
| 4 | 22pF | Capacitor_SMD:C_0603_1608Metric | C13, C21, C29, C63 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 3 | 22k | Resistor_SMD:R_0603_1608Metric | R3, R4, R5 |
| 3 | D_Schottky | Diode_SMD:D_SMA | D1, D2, D3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R43 |
| 1 | 0 | Capacitor_SMD:C_0603_1608Metric | R1 |
| 1 | 100p | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | 10u | Inductor_SMD:L_Abracon_ASPI-0630LR | L1 |
| 1 | 1R | Resistor_SMD:R_0805_2012Metric | R41 |
| 1 | 2.55k | Resistor_SMD:R_0603_1608Metric | R40 |
| 1 | 27k | Capacitor_SMD:C_0603_1608Metric | R8 |
| 1 | 39k | Resistor_SMD:R_0603_1608Metric | R42 |
| 1 | 40k | Resistor_SMD:R_0603_1608Metric | R39 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R49 |
| 1 | 6k8 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 8k2 | Capacitor_SMD:C_0603_1608Metric | R7 |
| 1 | HMCAD1511 | custom_parts:QFN_48_ADI | U18 |
| 1 | ISO1541 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U17 |
| 1 | LM337_TO252 | Package_TO_SOT_SMD:TO-252-2 | U15 |
| 1 | TPS55340PWPR | custom_parts:PWP14 | U11 |
| 1 | Z-TURN-LITE | custom_parts:CONN_BTH-060-XX-X-D-LC | A1 |
| 1 | ~ | custom_parts:2d5_flat | A2 |
More from anuejn/2d5
7- 2 layers34.4 × 38.1 mm
- 2 layers29.4 × 29.4 mm
- 2 layers100 × 100 mm
- 2 layers48.3 × 17.5 mm
- 2 layers48.3 × 17 mm
- 2 layers11.9 × 64.3 mm
Similar boards
- 4 layers118.7 × 72.5 mm
- 2 layers72.9 × 53.7 mm
- 4 layers115.7 × 68 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers100 × 100 mm
Xaar128-Driver
tuwrraphael/inkjet-printer
Inkjet printer for printing ceramic thin films: software, electronics and CAD designs
188 parts4Apache-2.0 - 2 layers65 × 56 mm
- 4 layers150 × 75 mm
Mypsu
nerdmaennchen/WattaVolt
this repository contains hardware + software for my custom PSU/bringup-tool/younameit
275 parts2MIT - 4 layers65.5 × 74.8 mm
Questions
How big is the Zynq test board PCB?
It measures 94 × 94 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Zynq test board use?
206 parts, built around the HMCAD1511, ISO1541D, 3296W-1-104 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zynq test board KiCad files?
From the anuejn/2d5 repository on GitHub, at the commit this page was made from: the board is boards/zynq-test-board/zynq-test-board.kicad_pcb and its schematic boards/connector_breakout/connector_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zynq test board design in my own project?
Its repository states no licence, so its author keeps all rights: ask anuejn before reusing the design.