Skip to the content

Open-source KiCad boards

107,410 boards

Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.

  • 2 layers50 × 34 mmPhotomarker, the printed circuit board in 3D

    Photomarker

    SheinbergLab/dserv

    Data server system for data acquisition and control

    31 parts2MIT
  • 2 layers20.3 × 106.7 mm4xmixer, the printed circuit board in 3D

    4xmixer

    shiekhgray/graynoise

    A place for my modular synthesizer designs

    25 parts2Unlicense
  • 2 layers67.1 × 23.4 mmAFE4404-tri PPG, the printed circuit board in 3D

    AFE4404-tri PPG

    ShifatHossain/AFE4404-tri-PPG

    An AFE4404 and ESP32 PICO D4/V3 based device to acquire three wavelength PPG signal.

    34 parts2
  • 2 layersPcb custom simm-40-rp2040, the printed circuit board in 3D

    Pcb custom simm-40-rp2040

    shishir-dey/pcb-custom-simm-40-rp2040

    Clone of the Raspberry Pi Pico board on a custom SIMM (single in-line memory module) footprint with 40 pins. Made with KiCad

    43 parts2MIT
  • 4 layersRbc circuits, the printed circuit board in 3D

    Rbc circuits

    shiukaheng/rbc

    If you're on a Mac, you might need to adjust the Docker permissions: This ensures Docker can run without requiring sudo every time.

    140 parts2
  • 2 layers153.7 × 87.7 mmDual Power Supply Board, the printed circuit board in 3D

    Dual Power Supply Board

    shmmolo/PCB-Dual_Power_Supply

    This project is a compact dual linear regulated power supply designed to provide symmetrical ±12 V DC outputs for analog circuits, audio amplifiers, and op-amp-based systems.

    26 parts2
  • 2 layers451.1 × 188.2 mmSvarog keyboard, the printed circuit board in 3D

    Svarog keyboard

    Sho-Keebs/Svarog-keyboard

    Big and mighty - Svarog Keyboard

    338 parts2GPL-3.0
  • 2 layers45 × 57.5 mmBuddy smps test bob, the printed circuit board in 3D

    Buddy smps test bob

    shraken/dual_rail_smps

    A dual +15/-15V rail SMPS test board using the TI tps61170 and tps63700 designed in KiCad

    42 parts2MIT
  • 4 layers63.9 × 37.1 mmUsbhid daq, the printed circuit board in 3D

    Usbhid daq

    shraken/usbhid_buddy

    Hardware, firmware, and software for the USBHID DAQ 'Buddy' device

    73 parts2
  • 4 layers88.9 × 50.2 mmDelta, the printed circuit board in 3D

    Delta

    shreyaslad/delta

    A minature, custom-made board that controls vehicles and streams onboard telemetry.

    76 parts2
  • 2 layers282.8 × 126 mmShockboard, the printed circuit board in 3D

    Shockboard

    Shtaiven/restive-engines-keyboards

    Custom keyboards by restive.engines

    169 parts2MIT
  • 4 layers111.3 × 22.4 mmCv sequencer, the printed circuit board in 3D

    Cv sequencer

    shulltronics/cv-binary-seq-eurorack

    A 1U Eurorack Module for Triggering CV Sequences

    108 parts2
  • 6 layers49.3 × 39.3 mmVoronToolheadPCB, the printed circuit board in 3D

    VoronToolheadPCB

    shxshxshxshx/VoronToolheadPCB

    USB Toolhead Board for Voron Stealthburner

    99 parts2GPL-3.0
  • 2 layers81 × 72.8 mmGPS INS PCB, the printed circuit board in 3D

    GPS INS PCB

    siddarthiyer/GPS-aided-Inertial-Navigation-System-Module

    Upper 6 bits - Module ID - max 0x3F Lower 5 bits - Command ID - max 0x1F CAN ID = (Module ID Default Module ID : 0x200 (Standard)

    29 parts2
  • 2 layers304.8 × 125.7 mmKeyboard cherry mx pcb mounted, the printed circuit board in 3D

    Keyboard cherry mx pcb mounted

    SijWoo/custom-keyboard

    Holds the electronic pcb files and src code for my custom keyboard

    218 parts2
  • 2 layers105.4 × 69.9 mmNvum CNC expander, the printed circuit board in 3D

    Nvum CNC expander

    silelis/NVCNC-NVUM-output-current-expantion-board

    Expantion board which increase NVCNC outputs current from 50mA to 0.2 A.

    92 parts2GPL-3.0
  • 2 layers235.4 × 122.9 mmMonkiiBoard58, the printed circuit board in 3D

    MonkiiBoard58

    Simbashrek276/MonkiiBoard_Keyboards

    All of our open-source keyboards, projects, and files for you to tune and make one your own.

    148 parts2
  • 2 layers70 × 100 mmFairylights driver, the printed circuit board in 3D

    Fairylights driver

    simmsb/zigbee_fairy_lights

    Battery powered zigbee fairy lights driver

    11 parts2
  • 2 layers62.2 × 83.8 mmDumb vga, the printed circuit board in 3D

    Dumb vga

    simon-frankau/dumb-vga

    Hardware to generate a simple VGA-like video display using little more than a memory chip and counters

    26 parts2MIT
  • 2 layers83.8 × 80 mmMosogep, the printed circuit board in 3D

    Mosogep

    simonyiszk/mosogep-sch-reboot

    Project reboot

    80 parts2
  • 2 layers97.8 × 17.8 mmRtl8762ckf dev board, the printed circuit board in 3D

    Rtl8762ckf dev board

    simplexion/rtl8762c-dev-board

    RTL8762C Development Board

    140 parts2CERN-OHL-P-2.0