
Open-source KiCad boards
107,410 boardsPrinted circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers35.6 × 66 mm

- 6 layers36 × 36 mm

- 4 layers79.8 × 51.8 mm

- 2 layers25.4 × 27.9 mm

Esb pluto adapter
JQIamo/Electronic_Sideband_Locking_Pluto
Firmware to use ADALM Pluto for Electronic Sideband Locking systems
9 parts4 - 2 layers81.5 × 68.5 mm

- 2 layers180.2 × 134.6 mm

Janus
jsbursik/Janus-Keyboard
A reversible split ergonomic keyboard made with Ergogen and KiCAD, firmware made with ZMK.
67 parts4 - 2 layers49.5 × 106 mm

Supra board
jsenzel1/supra
is multimode Eurorack module with 4 different experiments in long term time. you can run up to 2 modes at once. use the 4 way joystick and buttons to interact with the modes on the oled
119 parts4 - 2 layers315.9 × 132.6 mm

- 2 layers245.4 × 128.5 mm

- 2 layers22.9 × 30.5 mm

JtagArm20Adapter
julianobst/arm-jtag-20-10-plus
KiCad project for ARM Cortex-M JTAG Adapter with 20, 10 and 6 pin target header
6 parts4CC0-1.0 - 2 layers153.6 × 193.5 mm

Slimsplaydy panel
jusdisgi/slimsplaydy
Super slim 34-key ergonomic split keyboard with splay and stagger, using Kailh PG1316S Switches.
184 parts4 - 2 layers242.7 × 87.9 mm

Splave ferris pg1316s unrouted
jusdisgi/splave-ferris
Simple 34-key split ergonomic keyboard running ZMK on a Seeed XIAO BLE controller and supporting multiple switch types. Similar in layout to the Ferris Sweep except with a bit of finger splay.
74 parts4 - 2 layers61.9 × 76.2 mm

Digits pcb
justinlindh/digits
Encrypted retro phone network — private VoIP over vintage desk phones
77 parts4AGPL-3.0 - 2 layers235 × 180 mm

MDMA
juthomas/Electronics_MDMA
Sommaire : Description Installation Usage Visual Studio Code Linter Project Functionalities Leds Control Prerequisites Leds Variables Color Attribution Usefull Functions
138 parts4 - 2 layers54.6 × 86.4 mm

- 2 layers72 × 47.5 mm

PCB avr dx unbricker
k-takata/PCB_avr_dx_unbricker
UPDI High Voltage programmer for AVR Dx/Ex series
40 parts4 - 2 layers139.7 × 114.3 mm

Self balancing robot
K0nradG/self-balancing-robot
Self-balancing robot powered by nRF52840 and Zephyr RTOS, with BLE control, OTA updates, and a Raspberry Pi camera interface designed for future autonomous navigation.
36 parts4Apache-2.0 - 2 layers132.5 × 105.7 mm

- 4 layers48 × 30 mm

- 2 layers132 × 79 mm

- 2 layers40 × 9 mm

- 2 layers45 × 20 mm

LICHEE JACK USB DEBUGGER
KaliAssistant/Lichee-Jack-pcb
Open hardware extension board for Lichee-Jack with battery, Ethernet, and LED integration.
56 parts4GPL-3.0 - 2 layers43 × 43 mm

- 2 layers45 × 35 mm
