

BareDrones FC V1
- Size
- 36 × 36 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 127
- Nets
- 129
- Pads
- 469
- Tracks, vias
- 823, 177
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Apr 2024
- Updated
- 6 Apr 2024
Overview
BareDrones FC V1 is an open-source printed circuit board by jpwolfe9912, from the jpwolfe9912/BareDrones-FC-V1 repository on GitHub. It is a 6-layer board of 36 × 36 mm with 127 parts on 129 nets, routed with 823 tracks and 177 vias.
It is built around the BMP280, W25Q128JVSIQ and LP2985-33DBV, with the MPU-6000, BAT54C and BSS138 among its other parts. Its parts include 41 capacitors, 35 resistors, 18 connectors, 10 diodes and 9 ICs. It belongs with the STM32 boards of this library.
Main components
8BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure SensorsW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHLP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMPU-6000
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳、过量程保护功能 QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersBAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsCSTNE8M00G55Z000R0
SMD3213-3P-40℃~+125℃ 33pF 40Ω 8MHz SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
Parts
127| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C5, C6, C11, C12, C14, C15, C16, C19, C20, C21, C25, C27, C37, C38 +2 |
| 9 | 1k | Resistor_SMD:R_0402_1005Metric | R6, R7, R13, R14, R15, R18, R23, R24, R25 |
| 7 | Conn_01x04 | JPW_Connectors:Conn_1x4_SMT | J2, J3, J4, J5, J7, J8, J9 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R11, R12, R35 |
| 4 | MountingHole_Pad | JPW_Footprints:M3_Mounting_Hole | H1, H2, H3, H4 |
| 3 | 10nF | Capacitor_SMD:C_0402_1005Metric | C10, C30, C34 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C9, C26, C33 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C4, C32, C35 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C2, C24, C36 |
| 3 | Conn_01x03 | JPW_Connectors:Conn_1x3_SMT | J6, J15, J16 |
| 2 | 100 @ 100 Mhz | Inductor_SMD:L_0603_1608Metric | FB2, FB3 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C17, C18 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C22, C23 |
| 2 | 1pF | Capacitor_SMD:C_0402_1005Metric | C29, C40 |
| 2 | 200k | Resistor_SMD:R_0402_1005Metric | R27, R31 |
| 2 | 20k | Resistor_SMD:R_0402_1005Metric | R30, R34 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 22uF | Capacitor_SMD:C_0402_1005Metric | C31, C41 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R8, R29 |
| 2 | 3.7k | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | 390pF | Capacitor_SMD:C_0402_1005Metric | C28, C39 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R19, R20 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 75 | Resistor_SMD:R_0402_1005Metric | R21, R26 |
| 2 | 90V, 2A | Diode_SMD:D_SOD-523 | D8, D11 |
| 2 | BLUE | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 2 | Conn_01x02 | JPW_Connectors:Conn_1x2_SMT | J14, J17 |
| 2 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U7, U8 |
| 2 | MP4560_QFN10 | JPW_Footprints:MP4560DQ | U6, U9 |
| 2 | RED | LED_SMD:LED_0603_1608Metric | D2, D4 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 100@100MHz | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 12uH | JPW_Footprints:SRN3015-4R7M | L4 |
| 1 | 15uH | JPW_Footprints:SRN3015-4R7M | L3 |
| 1 | 165k | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 233 | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 27MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y2 |
| 1 | 3.8k | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 589 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 93.1k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | Arrow | JPW_Footprints:Arrow | L2 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D12 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U3 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CSTNE8M00G55Z000R0 | JPW_Footprints:OSC_CSTNE8M00G55Z000R0 | Y1 |
| 1 | Conn_01x06 | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J11 |
| 1 | Conn_01x06 | JPW_Connectors:Conn_DJI | J12 |
| 1 | Conn_01x08 | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J10 |
| 1 | Conn_01x08 | JPW_Connectors:Conn_8Edge_SMT | J13 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x07_P1.27mm_Vertical_SMD | J20 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | MAX7456EUI+ | JPW_Footprints:MAX7456 | U5 |
| 1 | MPU-6000 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | PURPLE | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | STM32F722RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | USB4105-GF-A | JPW_Connectors:GCT_USB4105-GF-A | J18 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U4 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D5 |
Similar boards
- 6 layers29.5 × 29.5 mm

- 6 layers54.8 × 39.2 mm

- 4 layers29.5 × 29.5 mm

- 4 layers36 × 36 mm

- 4 layers40 × 40 mm

- 6 layers50 × 81.3 mm

- 2 layers74 × 45 mm

- 2 layers100 × 100 mm

Zxuno1010
UzixLS/zxuno1010-board
10x10cm PCB variant of ZX-UNO project for G738/G706 enclosure
231 parts23MIT
Questions
How big is the BareDrones FC V1 PCB?
It measures 36 × 36 mm and has 6 copper layers, 1.6 mm thick.
What parts does the BareDrones FC V1 use?
127 parts, built around the BMP280, W25Q128JVSIQ, LP2985-33DBV and MPU-6000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BareDrones FC V1 KiCad files?
From the jpwolfe9912/BareDrones-FC-V1 repository on GitHub, at the commit this page was made from: the board is BareDrones-FC-V1.kicad_pcb and its schematic BareDrones-FC-V1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BareDrones FC V1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jpwolfe9912 before reusing the design.