6 layers36 × 36 mm
6 layers29.5 × 29.5 mm
F722-FC Mini V2
jpwolfe9912/F722-FC-Mini-V2- Size
- 29.5 × 29.5 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 113
- Nets
- 91
- Pads
- 425
- Tracks, vias
- 764, 150
- Pours
- 16
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Oct 2021
- Updated
- 15 Oct 2021
Overview
F722-FC Mini V2 is an open-source printed circuit board by jpwolfe9912, from the jpwolfe9912/F722-FC-Mini-V2 repository on GitHub. It is a 6-layer board of 29.5 × 29.5 mm with 113 parts on 91 nets, routed with 764 tracks and 150 vias.
It is built around the BMP280, W25Q128JVSIQ and LP2985-33DBV, with the MP4462DN, MPU-6000 and BSS138 among its other parts. Its parts include 38 capacitors, 29 resistors, 14 connectors, 9 ICs and 8 diodes. It belongs with the STM32 boards of this library.
Main components
8
BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure Sensors
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
LP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMP4462DN
SO-8EPSOIC-8-EP New Arrivals ROHSMonolithic Power SystemsUncategorised
MPU-6000
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳、过量程保护功能 QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometers
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
CSTNE8M00G55Z000R0
SMD3213-3P-40℃~+125℃ 33pF 40Ω 8MHz SMD3213-3P Ceramic Resonators ROHSMurataCeramic ResonatorsUJ2-MIBH-4-SMT-TR
SMDSMD USB Connectors ROHSCUIUSB Connectors
README
README.mdF722-FC-Mini-V2
Parts
113| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C8, C10, C15, C21, C22, C24, C25, C27, C31, C33, C45, C47 +1 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R9, R10, R12, R21, R23, R31 |
| 5 | Conn_01x04 | Connector_Wire:Conn_4Pin | J2, J3, J7, J11, J13 |
| 4 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C11, C16, C19, C46 |
| 4 | 90V, 2A | Diode_SMD:D_SOD-123F | D1, D2, D4, D6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3mm_M2_20x20 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R18, R27 |
| 3 | 10nF | Capacitor_SMD:C_0402_1005Metric | C2, C14, C18 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C13, C17 |
| 3 | Conn_01x03 | Connector_Wire:Conn_3Pin | J1, J4, J6 |
| 2 | 100 @ 100 Mhz | Inductor_SMD:L_0603_1608Metric | FB1, FB3 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C28, C29 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C12, C20 |
| 2 | 15uH | Inductor_SMD:L_Bourns-SRN3015 | L1, L2 |
| 2 | 200k | Resistor_SMD:R_0402_1005Metric | R19, R25 |
| 2 | 20k | Resistor_SMD:R_0402_1005Metric | R11, R20 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R7, R15 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C23, C26 |
| 2 | 3.7k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 3.8k | Resistor_SMD:R_0402_1005Metric | R13, R22 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R5, R8 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C30, C32 |
| 2 | 56k | Resistor_SMD:R_0402_1005Metric | R24, R28 |
| 2 | 75 | Resistor_SMD:R_0402_1005Metric | R14, R16 |
| 2 | 820pF | Capacitor_SMD:C_0402_1005Metric | C34, C35 |
| 2 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1, U3 |
| 2 | MP4462 | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mm | U5, U8 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 100 @ 100 MHz | Inductor_SMD:L_0603_1608Metric | FB2 |
| 1 | 27MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 589 | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | Arrow | Footprints:Arrow | L5 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CSTNE8M00G55Z000R0 | Footprints:OSC_CSTNE8M00G55Z000R0 | Y2 |
| 1 | Conn_01x02 | Connector_Wire:Conn_2Pin | J12 |
| 1 | Conn_01x06 | Connector_JST:JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J5 |
| 1 | Conn_01x08 | Connector_Wire:Conn_FC_Solder_8 | J10 |
| 1 | Conn_01x08 | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J9 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J16 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | MAX7456EUI+ | JPW_Footprints:MAX7456EUI&plus_T | U6 |
| 1 | MPU-6000 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U7 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | STM32F722RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | UJ2-MIBH-4-SMT-TR | digikey-footprints:USB_Micro_B_Female_UJ2-MIBH-G-SMT-TR | J14 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U10 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D7 |
The 112 most common of 113 parts.
Similar boards
- 4 layers29.5 × 29.5 mm
- 6 layers54.8 × 39.2 mm
- 6 layers46 × 55.8 mm
- 4 layers36 × 36 mm
- 2 layers85 × 70 mm
0-125MHz Synthesiser Reduced BoM Nicer Layout
jamesfletcher22/FreqSynthPCB
A PCB Design for an Si5351A Frequency Synthesiser with Manual Control
44 parts - 6 layers50 × 81.3 mm
- 2 layers80 × 96 mm
Programmer Board
Reid-n0rc/LMS-6_Interface_Board
Interface to the LMS-6 radiosonde carde edge connector.
55 parts4GPL-3.0
Questions
How big is the F722-FC Mini V2 PCB?
It measures 29.5 × 29.5 mm and has 6 copper layers, 1.6 mm thick.
What parts does the F722-FC Mini V2 use?
113 parts, built around the BMP280, W25Q128JVSIQ, LP2985-33DBV and MP4462DN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the F722-FC Mini V2 KiCad files?
From the jpwolfe9912/F722-FC-Mini-V2 repository on GitHub, at the commit this page was made from: the board is F722-FC-Mini-V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the F722-FC Mini V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jpwolfe9912 before reusing the design.