

F722-FC V4
- Size
- 36 × 36 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 92
- Pads
- 453
- Tracks, vias
- 854, 168
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Jun 2021
- Updated
- 4 Jul 2021
Overview
F722-FC V4 is an open-source printed circuit board by jpwolfe9912, from the jpwolfe9912/F722-FC-V4 repository on GitHub. It is a 4-layer board of 36 × 36 mm with 124 parts on 92 nets, routed with 854 tracks and 168 vias.
It is built around the BMP388, W25Q128JVSIQ and LP2985-33DBV, with the MPU-6000 and BSS138 among its other parts. Its parts include 43 capacitors, 30 resistors, 17 connectors, 9 ICs and 9 diodes. It belongs with the STM32 boards of this library.
Main components
5BMP388
LGA-10(2x2)-40℃~+85℃ 1.65V~3.6V 1pa/K 2uA 30Kpa~1.25bar 50pa 8pa I2C、SPI LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHLP2985-33DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 16V 3.3V 30uVrms 45dB@(1kHz) 575mV@(150mA) 850uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Noise bypass terminal Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMPU-6000
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps 运动事件检测、同步与时间戳、过量程保护功能 QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdF722 Flight Controller V4
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C10, C15, C20, C21, C28, C31, C39, C40, C41, C42, C45, C47 +2 |
| 7 | 1k | Resistor_SMD:R_0402_1005Metric | R9, R21, R23, R25, R29, R30, R31 |
| 5 | Conn_01x04 | Connector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm | J2, J3, J14, J15, J17 |
| 4 | 10pF | Capacitor_SMD:C_0402_1005Metric | C26, C32, C43, C44 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_Pad | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R27 |
| 3 | 10nF | Capacitor_SMD:C_0402_1005Metric | C2, C14, C18 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C13, C17 |
| 3 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C11, C16, C19 |
| 3 | Conn_01x03 | Connector_Wire:SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | J4, J5, J11 |
| 2 | 100 @ 100 Mhz | Inductor_SMD:L_0603_1608Metric | FB1, FB3 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric | C37, C38 |
| 2 | 1pF | Capacitor_SMD:C_0402_1005Metric | C35, C36 |
| 2 | 200k | Resistor_SMD:R_0402_1005Metric | R17, R19 |
| 2 | 20k | Resistor_SMD:R_0402_1005Metric | R10, R11 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R7, R15 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C22, C23 |
| 2 | 2k | Resistor_SMD:R_0402_1005Metric | R6, R12 |
| 2 | 3.7k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 390pF | Capacitor_SMD:C_0402_1005Metric | C33, C34 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R5, R8 |
| 2 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C24, C29 |
| 2 | 75 | Resistor_SMD:R_0402_1005Metric | R33, R34 |
| 2 | 90V, 2A | Diode_SMD:D_SOD-123F | D4, D6 |
| 2 | Conn_01x02 | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J1, J12 |
| 2 | D_Schottky | Footprints:SBR3U30P1-7 | D1, D2 |
| 2 | LP2985-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U1, U3 |
| 2 | MP4560_QFN10 | Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mm | U4, U5 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 100 @ 100 MHz | Inductor_SMD:L_0603_1608Metric | FB2 |
| 1 | 12uH | Inductor_SMD:L_Bourns-SRN3015 | L2 |
| 1 | 15uH | Inductor_SMD:L_Bourns-SRN3015 | L1 |
| 1 | 165k | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C46 |
| 1 | 233 | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 27MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | 3.8k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 589 | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 8MHz | Oscillator:Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | HSE1 |
| 1 | 93.1k | Resistor_SMD:R_0402_1005Metric | R24 |
| 1 | Arrow | Footprints:Arrow | L5 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | BMP388 | Footprints:BMP388 | U9 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x01 | Connector_Wire:SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm | J16 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06 | Footprints:JST_SM06B-SRSS-TB(LF)(SN) | J6 |
| 1 | Conn_01x06 | Connector_Wire:Connector_Wire_Solder_DJI | J7 |
| 1 | Conn_01x08 | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | J9 |
| 1 | Conn_01x08 | Connector_Wire:SolderWire-0.1sqmm_1x08_D0.4mm_OD1mm | J10 |
| 1 | EGA | Footprints:EGA | L4 |
| 1 | GREEN | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | MAX7456EUI+ | JPW_Footprints:MAX7456EUI&plus_T | U6 |
| 1 | MPU-6000 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U7 |
| 1 | PURPLE | LED_SMD:LED_0603_1608Metric | D9 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | STM32F722RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J13 |
| 1 | USN | Footprints:USN | L3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U10 |
| 1 | YELLOW | LED_SMD:LED_0603_1608Metric | D7 |
Similar boards
- 6 layers36 × 36 mm

- 6 layers29.5 × 29.5 mm

- 2 layers74 × 45 mm

- 4 layers29.5 × 29.5 mm

- 6 layers54.8 × 39.2 mm

- 4 layers57 × 57 mm

- 4 layers

Watch
VarunAPatil/MedSafe
The goal: a compact, wrist-worn device that simultaneously tracks heart rate & SpO₂, motion & orientation, altitude & atmospheric pressure, and GNSS location — all in one tightly integrated system.
121 parts - 6 layers50 × 81.3 mm

Questions
How big is the F722-FC V4 PCB?
It measures 36 × 36 mm and has 4 copper layers, 1.6 mm thick.
What parts does the F722-FC V4 use?
124 parts, built around the BMP388, W25Q128JVSIQ, LP2985-33DBV and MPU-6000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the F722-FC V4 KiCad files?
From the jpwolfe9912/F722-FC-V4 repository on GitHub, at the commit this page was made from: the board is F722-FC-V4.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the F722-FC V4 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jpwolfe9912 before reusing the design.