2 layers48.9 × 26.7 mm
2 layers45 × 35 mm
EasyTester RevE
kanengomibako/Modules4- Size
- 45 × 35 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 66
- Nets
- 44
- Pads
- 223
- Tracks, vias
- 340, 79
- Pours
- 196
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Jul 2025
- Updated
- 11 May 2026
Overview
EasyTester RevE is an open-source printed circuit board by kanengomibako, from the kanengomibako/Modules repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 45 × 35 mm with 66 parts on 44 nets, routed with 340 tracks and 79 vias.
It is built around the CH32V006F8U6, HT7533-1 and 1N4148WS, with the CL10A105KB8NNN, 0603WAF2201 and 0402WGF5101 among its other parts. Its parts include 23 resistors, 7 capacitors, 7 connectors, 5 diodes and 3 switches. It belongs with the RISC-V boards of this library.
Main components
12CH32V006F8U6
QFN-20(3x3)UncategorisedWCH (Nanjing Qinheng Microelectronics)
HT7533-1
SOT-23-5-40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching Diodes
CL10A105KB8NNN
06031uF 50V X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
0603WAF2201
R0603-55℃~+155℃ 100mW 2.2kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
0402WGF5101
0402-55℃~+155℃ 5.1kΩ 50V 62.5mW Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0603WAF2000
0603-55℃~+155℃ 100mW 200Ω 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0603WAF1504
0603-55℃~+155℃ 1.5MΩ 100mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0603WAF1002
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0603WAF0000
0603-55℃~+155℃ 0Ω 100mW 75V Thick Film Resistor ±1% 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount0603WAF1003
0603-55℃~+155℃ 100kΩ 100mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
CL31A107MQHNNNE
1206100uF 6.3V X5R ±20% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
10VBlocker/README.md10V Blocker
10V以上の電圧が入力されると、電源供給を遮断するモジュールです。
配線方法
- IN → 電源入力 +
- 上側中央のパッド → 電源入出力 -（グラウンド）
- OUT → 電源出力 +
基板下側のパッドはどこにも接続されていません。マル信無線電機 DCジャック MJ-40Aに直付けする場合、電池の接続が可能です。
注意事項
- 新品の電池は電圧が10V以上の場合があり、本モジュールにより電源が遮断される可能性があります。
- 電源の遮断が不十分となる場合があるため、消費電流0.1mA未満の機器には使用しないでください。
資料
| 主な仕様 | |
|---|---|
| 最大入力電圧 | 30V |
| 遮断電圧 | 10.0V ～ 10.3V |
| 直列抵抗 | 0.04Ω |
| 消費電流 | 0.7mA |
| 最大出力電流 | 1A |
| 必要出力電流 | 0.1mA以上 |
| 外形寸法 | 幅 12 mm × 奥行 10 mm × 高さ 2.5 mm |
| 質量 | 約 0.4 g |
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | M | MountingHole:MountingHole_3.2mm_M3 | *, *, *, *, * |
| 4 | 1N4148WS | myFoot:my_D_SOD-323 | D1, D2, D3, D4 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C4, C5 |
| 4 | 2.2k | Resistor_SMD:R_0603_1608Metric | R2, R6, R8, R10 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R20, R21, R22, R23 |
| 3 | 200R | Resistor_SMD:R_0603_1608Metric | R1, R9, R17 |
| 3 | SW | myFoot:THAF01-NC-R | SW0, SW1, SW2 |
| 2 | 1.5M | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R16, R18 |
| 2 | GND | myFoot:my_SmallestPad_0-6mmDrill | TP9, TP10 |
| 1 | 0.96"_OLED_Display_Module | myFoot:OLED_Display_0.96inch | J6 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R0 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R5 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 100u | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | 2.2M | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 220p | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 22k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 3.3V | myFoot:my_SmallestPad_0-6mmDrill | TP2 |
| 1 | 4.7M | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 5V | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J1 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CH32V006F8U6 | Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U1 |
| 1 | COM | myFoot:tester_pad3 | J4 |
| 1 | DC_IN | myFoot:my_DC_Jack | J8 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | HT7533-1 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D5 |
| 1 | LOGO | myFoot:kanen_logo | G*** |
| 1 | NRST | myFoot:my_SmallestPad_0-6mmDrill | TP4 |
| 1 | PC7 | myFoot:my_SmallestPad_0-6mmDrill | TP3 |
| 1 | PD0 | myFoot:my_SmallestPad_0-6mmDrill | TP6 |
| 1 | PD3 | myFoot:my_SmallestPad_0-6mmDrill | TP5 |
| 1 | PD6 | myFoot:my_SmallestPad_0-6mmDrill | TP12 |
| 1 | SWIO | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | Speaker | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | SP1 |
| 1 | TYPE-C-31-M-12 | myFoot:USB_C_TYPE-C-31-M-12 | J7 |
| 1 | V+ | myFoot:my_SmallestPad_0-6mmDrill | TP7 |
| 1 | V- | myFoot:my_SmallestPad_0-6mmDrill | TP8 |
| 1 | VOLT/OHM | myFoot:tester_pad2 | J3 |
| 1 | X | Capacitor_SMD:C_0603_1608Metric | C8 |
More from kanengomibako/Modules
7- 2 layers35 × 24.5 mm
- 4 layers24.5 × 24.5 mm
- 4 layers10.1 × 20.3 mm
- 2 layers17.9 × 15 mm
- 2 layers25.5 × 11 mm
- 2 layers12 × 9.5 mm
Similar boards
- 2 layers50 × 75 mm
- 4 layers32.8 × 36.3 mm
Esp32
gdoor-org/gdoor
Wifi adapter and bus protocol documentation for the Gira TKS Door System
68 parts57GPL-3.0 - 4 layers80 × 50.5 mm
- 4 layers76 × 100 mm
- 8 layers120 × 100 mm
- 2 layers76 × 72 mm
- 2 layers90.2 × 91.3 mm
Pb v1
ossm-rs/ossm-rs-powerboard
Power management PCB for AIM family motors, designed to pair with the Industrial ESP32-S3-RS485-CAN control board by Waveshare and run with OSSM-RS software.
58 parts2 - 2 layers72 × 60 mm
Jewelled lc1 chargerProgrammer
matthiasnowak/jewelled
This is a panel meant for production of the Earrings, allowing for 2 Earrings per panel.
119 parts3
Questions
How big is the EasyTester RevE PCB?
It measures 45 × 35 mm and has 2 copper layers, 1 mm thick.
What parts does the EasyTester RevE use?
66 parts, built around the CH32V006F8U6, HT7533-1, 1N4148WS and CL10A105KB8NNN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the EasyTester RevE KiCad files?
From the kanengomibako/Modules repository on GitHub, at the commit this page was made from: the board is EasyTester/EasyTester_RevE.kicad_pcb and its schematic 10VBlocker/10VBlocker_RevB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the EasyTester RevE design in my own project?
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).