Skip to the content
12345

HT7533-1

HOLTEKJLCPCB basic

-40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
holtek-semicon/HT7533-1
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
245,529 at JLCPCB (C14289)
Used on
64 open-source boards

Overview

The HT7533-1 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by HOLTEK in a SOT-23-5 package with 5 pins. -40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT_4NC_5NC, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 245,529 are in stock at JLCPCB (part C14289). 64 open-source boards in 56 repositories on GitHub use it.

Symbol

2IN3OUT1GND
Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT_4NC_5NCFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the HT7533-1
PinNameType
1GNDPower in
2INPower in
3OUTPower out
4NCNot connected
5NCNot connected

Open-source boards using it

64See all 64
  • 2 layers299 × 82.5 mmPixelWave, the printed circuit board in 3D

    PixelWave

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    663 parts915
  • 4 layers86 × 34 mmBsl drv v1, the printed circuit board in 3D

    Bsl drv v1

    jackw01/scanlight

    A better light source for scanning color negative film

    157 parts397CERN-OHL-W-2.0
  • 4 layers243.8 × 171.5 mmNeotron Pico, the printed circuit board in 3D

    Neotron Pico

    Neotron-Compute/Neotron-Pico

    A Neotron powered by the Raspberry Pi Pico

    242 parts250
  • 2 layers191.5 × 76 mmPcb project, the printed circuit board in 3D

    Pcb project

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    337 parts117GPL-3.0
  • 4 layers65 × 56.5 mmSH RPi, the printed circuit board in 3D

    SH RPi

    hatlabs/SH-RPi-hardware

    Sailor Hat for Raspberry Pi hardware design files

    168 parts56
  • 2 layers60 × 30 mmScoring table hardware, the printed circuit board in 3D

    Scoring table hardware

    GrappleRobotics/JMS

    Another alternative field management system for the FIRST Robotics Competition.

    30 parts18
  • 2 layers14 × 100 mmPowerline USB C, the printed circuit board in 3D

    Powerline USB C

    Andreas-Dorfner/Powerline-USB-C

    Powerline is a small 3HP Front Entry USB-C eurorack power supply.

    22 parts16
  • 4 layers76 × 100 mmChlorine revD, the printed circuit board in 3D

    Chlorine revD

    kanengomibako/Chlorine

    206 parts11Unlicense

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HT7533-1?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1GND_2IN_3OUT_4NC_5NC and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HT7533-1?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the HT7533-1 datasheet?

HOLTEK publishes it: the Datasheet link on this page opens it.

Where can I order the HT7533-1?

JLCPCB lists it as part C14289, with 245,529 in stock; the sellers' links on this page open their listings.

What can replace the HT7533-1?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HT7533-1?

64 boards in 56 repositories on GitHub; the most starred are listed on this page, with their KiCad files.