Skip to the content
12345

TPS7A2033PDBV

Texas InstrumentsExtended

-40℃~+125℃@(Tj) 1 10uVrms 140mV@(300mA) 3.3V 300mA 65dB@(100kHz) 6V 8.5uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
ti/TPS7A2033PDBV
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-23-5
Pins
5
In stock
131,964 at JLCPCB (C2862740)
Used on
7 open-source boards

Overview

The TPS7A2033PDBV is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Texas Instruments in a SOT-23-5 package with 5 pins. -40℃~+125℃@(Tj) 1 10uVrms 140mV@(300mA) 3.3V 300mA 65dB@(100kHz) 6V 8.5uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown、Enable control、Input under-voltage protection、Output discharge、Built-in soft-start Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Regulator_Linear:TPS7A20xxxDBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 131,964 are in stock at JLCPCB (part C2862740). 7 open-source boards in 6 repositories on GitHub use it.

Symbol

1IN2GND3EN5OUT
Regulator_Linear:TPS7A20xxxDBVFrom KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

From the datasheet

11
Supply, least
1.6 V · VIN, recommended operating min · p. 5
Supply, most
6 V · VIN, recommended operating max · p. 5
Supply, absolute maximum
6.5 V · VIN, absolute maximum · p. 5
Junction, hottest
150 °C · TJ, absolute maximum junction temperature · p. 5
Takes working
6.5 µA · IGND, typical; VEN = VIN = 6V, IOUT = 0mA, TJ = 25°C · p. 6
Takes asleep
70 nA · ISHDN, typical; VEN = 0V, VIN = 6.0V, TJ = 25°C · p. 6
Gives
300 mA · IOUT, rated continuous max · p. 5
Dropout
145 mV · VDO, max at 300mA; DBV, 2.5V ≤ VOUT < 5.5V · p. 6
Junction to air (DBV)
187.1 K/W · Junction-to-ambient thermal resistance · p. 6
Junction to case (DBV)
85.5 K/W · Junction-to-case top thermal resistance · p. 6
Junction to board (DBV)
54.4 K/W · Junction-to-board thermal resistance · p. 6

What it is and has

5
Output noise
7μVRMS · p. 1
PSRR
95dB at 1kHz · p. 1
Output voltage tolerance
±1.5% maximum · p. 1
Enable
Smart enable pulldown · p. 1
Package
2.9mm × 2.8mm SOT23-5 (DBV) · p. 1

Around it

3
cap 1 µF
between IN and GND; Nominal recommended input capacitance. · p. 5
cap 1 µF
between OUT and GND; Recommended minimum nominal output capacitance; table maximum is 200 uF. · p. 5
cap 0.47μF
between OUT and GND; Minimum effective output capacitance for stability; maximum effective capacitance is 200uF. · p. 5

Specifications

30
ParameterConditionsAs printedPage
电压 VINRelative to GNDmin -0.3 · max 6.5 V5
电压 VOUTRelative to GND; maximum is the lesser of 6.5 V and VIN + 0.3 Vmin -0.3 V5
电压 VENRelative to GNDmin -0.3 · max 6.5 V5
工作结温,TJ TJmin -40 · max 150 °C5
贮存温度,Tstg Tstgmin -65 · max 150 °C5
静电放电 V(ESD)人体放电模型 (HBM),符合 ANSI/ESDA/JEDEC JS-001 标准(1); ± ratingmax 2000 V5
静电放电 V(ESD)充电器件模型 (CDM),符合 JEDEC 规范 JESD22-C101(2); ± ratingmax 750 V5
输入电源电压 VINmin 1.6 · max 6 V5
使用输入电压 VENmin 0 · max 6 V5
标称输出电压范围 VOUTmin 0.8 · max 5.5 V5
输出电流 IOUTmin 0 · max 300 mA5
输入电容器(2) CINtyp 1 uF5
输出电容器(3) COUTmin 1 · max 200 uF5
输出电容器有效串联电阻 ESRmax 100 mΩ5
工作结温 TJmin -40 · max 125 °C5
结至环境热阻 RθJADBV (SOT-23), 5 引脚typ 187.1 °C/W6
结至外壳(顶部)热阻 RθJC(top)DBV (SOT-23), 5 引脚typ 85.5 °C/W6
结至电路板热阻 RθJBDBV (SOT-23), 5 引脚typ 54.4 °C/W6
结至顶部特征参数 ψJTDBV (SOT-23), 5 引脚typ 27.1 °C/W6
结至电路板特征参数 ψJBDBV (SOT-23), 5 引脚typ 54.1 °C/W6
输出电压容差 ΔVOUTDBV; VOUT ≥ 2.8V; VIN = (VOUT(NOM) + 0.3V) 至 6.0V; IOUT = 1mA 至 300mA; TJ = –40℃ 至 +125℃min -1.5 · max 1.5 %6
线路调整率 ΔVOUTVIN = (VOUT(NOM) + 0.3V) 至 6.0V; IOUT = 1mA; TJ = 25℃typ 0.03 %/V6
负载调整率 ΔVOUTIOUT = 1mA 至 300mA(DBV 封装); TJ = 25℃typ 19 mV6
静态地电流 IGNDVEN = VIN = 6V; IOUT = 0mA; TJ = 25°Ctyp 6.5 · max 8.5 uA6
静态地电流 IGNDVEN = VIN = 6V; IOUT = 0mA; TJ = –40°C 至 85°Cmax 10 uA6
静态地电流 IGNDVEN = VIN = 6V; IOUT = 0mA; TJ = –40°C 至 125°Cmax 15 uA6
静态地电流 IGNDVEN = VIN = 6V; IOUT = 300mA; TJ = 25℃typ 2000 uA6
关断接地电流 ISHDNVEN = 0V(禁用),VIN = 6.0V,TJ = 25°Ctyp 0.07 · max 0.2 uA6
压降中的 IGND IGND(DO)VIN ≤ VOUT(NOM),IOUT = 0mA,VEN = VINtyp 6.5 · max 15 uA6
压降电压 VDODBV; 2.5V ≤ VOUT < 5.5V; IOUT = 300mA; VOUT = 95% x VOUT(NOM)max 145 mV6

Open-source boards using it

7
  • 4 layers75 × 42 mmXmit, the printed circuit board in 3D

    Xmit

    tdunning/xmit

    A simple low-power digital transmitter for amateur bands using new components

    87 parts3
  • 2 layers100 × 64 mmPCB-402 base board, the printed circuit board in 3D

    PCB-402 base board

    LollobolUni/muon-time-dilation

    A self-built experiment to measure the lifetime of cosmic-ray muons and to show, with data taken from cable cars in the Alps, that moving clocks run slow.

    73 parts1
  • 4 layers104.3 × 34.3 mmResonance, the printed circuit board in 3D

    Resonance

    SethTheDev/Resonance

    A powerful STM32F411-based USB audio interface rocking a Cirrus Logic DAC with DSP

    123 parts1
  • 4 layers124.6 × 101 mmMicrophone board, the printed circuit board in 3D

    Microphone board

    Epicotch/Acoustic-Camera

    acoustic camera:tm:

    212 partsMIT
  • 4 layers34.4 × 26.4 mmOdc cc2500, the printed circuit board in 3D

    Odc cc2500

    matthewgpetrin/odc-cc2500

    Simple breakout board for the CC2500. To be incorporated into more ambitious projects in the future.

    40 parts
  • 2 layers80 × 60 mmHushlog, the printed circuit board in 3D

    Hushlog

    rudy1904/hushlog

    -channel, 24-bit data logger for small, slow signals: thermocouples, strain gauges, photodiodes and RTDs.

    71 parts
  • 4 layers75 × 42 mmOvertone, the printed circuit board in 3D

    Overtone

    tdunning/xmit

    A simple low-power digital transmitter for amateur bands using new components

    37 parts3

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TPS7A2033PDBV?

Yes. The symbol is Regulator_Linear:TPS7A20xxxDBV and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TPS7A2033PDBV?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the TPS7A2033PDBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TPS7A2033PDBV?

JLCPCB lists it as part C2862740, with 131,964 in stock; the sellers' links on this page open their listings.

What can replace the TPS7A2033PDBV?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TPS7A2033PDBV?

7 boards in 6 repositories on GitHub; the most starred are listed on this page, with their KiCad files.