
Xmit
tdunning/xmit
A simple low-power digital transmitter for amateur bands using new components

Simple breakout board for the CC2500. To be incorporated into more ambitious projects in the future.
Odc cc2500 is an open-source printed circuit board by matthewgpetrin, from the matthewgpetrin/odc-cc2500 repository on GitHub. It is a 4-layer board of 34.4 × 26.4 mm with 40 parts on 26 nets, routed with 197 tracks and 140 vias.
It is built around the CC2500RGP, TPS7A2033PDBV and SDD32A05L01. Its parts include 17 capacitors, 8 resistors, 3 connectors, 3 inductors and 2 ICs.
Copyright © 2026 Matthew Petrin
Liscenses are annoying. Please feel free to use this design for any personal projects. Please do not sell any products using this design without my express permission. And of course, follow any local RF regulations.
This repo contains KiCAD files and fabrication outputs for a simple breakout board designed around the CC2500 transceiver. The board features a 0.1" pitch header providing access to the IC's control pins, and an SMA header on the RF output.
The board is to be powered by a 5V DC source, which is regulated down to 3.3V. Power can be provided via the rectangular header, or via USB C.
The project is designed in KiCAD 9, and should be compatible with equal or greater versions. All required symbols and footprints are contained within.
A BOM is provided in the repo. There are a few components which may be affected by manufacturing processes:
The choice of termination capacitors around the crystal resonator will depend on board parasitics - see the CC2500 datasheet for further details
The choice of current-limiting resistor on the power LED will obviously depend on the forward voltage of the selected LED and the desired brightness.
The series termination resistors on the CC2500 may need to be adjusted/shorted depending on bus impedance, bus length, edge rate, and external capacitance.
assets: Images associated with documentation.
docs: Currently empty. May be updated in the future.
fab: Files required for board fabrication and assembly (bill-of-materials, gerbers, schematics, and position files).
kicad: KiCAD project files, including schematic, layout, symbols, footprints, and design rules.
Board mounting holes are compatible with m3 or 4-40 screws, and are spaced 26x18 mm.
As of rev. 1.0, the mounting holes are not grounded.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | odc-cc2500:C_0402_1005Metric | C101, C102, C103, C110 |
| 4 | MountingHole | odc-cc2500:MountingHole_3.2mm_M3_DIN965_Pad | H101, H102, H103, H104 |
| 3 | 1.20n | odc-cc2500:L_0402_1005Metric | L101, L102, L103 |
| 3 | 100 | odc-cc2500:R_0402_1005Metric | R102, R103, R104 |
| 3 | 220p | odc-cc2500:C_0402_1005Metric | C104, C105, C106 |
| 2 | 1.00p | odc-cc2500:C_0402_1005Metric | C109, C111 |
| 2 | 100p | odc-cc2500:C_0402_1005Metric | C107, C108 |
| 2 | 18.0p | odc-cc2500:C_0402_1005Metric | C114, C115 |
| 2 | 2.20u | odc-cc2500:C_0402_1005Metric | C116, C117 |
| 2 | 5.10k | odc-cc2500:R_0402_1005Metric | R107, R108 |
| 1 | 0.1" Header | odc-cc2500:PinHeader_2x07_P2.54mm_Vertical | J102 |
| 1 | 1.50p | odc-cc2500:C_0402_1005Metric | C113 |
| 1 | 1.80p | odc-cc2500:C_0402_1005Metric | C112 |
| 1 | 10.0k | odc-cc2500:R_0402_1005Metric | R101 |
| 1 | 220 | odc-cc2500:R_0402_1005Metric | R106 |
| 1 | 56.0k | odc-cc2500:R_0402_1005Metric | R105 |
| 1 | ABM8-26.000MHZ | odc-cc2500:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y101 |
| 1 | CC2500 | odc-cc2500:Texas_RGP0020H_VQFN-20-1EP_4x4mm_P0.5mm_EP2.4x2.4mm | U101 |
| 1 | LED | odc-cc2500:LED_0603_1608Metric | D102 |
| 1 | SDD32A05L01 | odc-cc2500:D_SOD-323 | D101 |
| 1 | SMA | odc-cc2500:SMA_Samtec_SMA-J-P-H-ST-EM1_EdgeMount | J101 |
| 1 | TPS7A2033PD | odc-cc2500:SOT-23-5 | U102 |
| 1 | USBC | odc-cc2500:USB_C_Receptacle_HRO_TYPE-C-31-M-17 | J103 |

tdunning/xmit
A simple low-power digital transmitter for amateur bands using new components

LollobolUni/muon-time-dilation
A self-built experiment to measure the lifetime of cosmic-ray muons and to show, with data taken from cable cars in the Alps, that moving clocks run slow.

SethTheDev/Resonance
A powerful STM32F411-based USB audio interface rocking a Cirrus Logic DAC with DSP


rudy1904/hushlog
-channel, 24-bit data logger for small, slow signals: thermocouples, strain gauges, photodiodes and RTDs.

diggit/xlyrx
Hobby RC 2.4GHz receiver based on cc2500 and STM32, supporting FrSky 2 Way D-series protocol

jbrown3859/EE175-SeniorDesign
CubeSat Flight Computer and Radio - EE175 Senior Design F22

mcauser/CC2500-Breakout
Breakout board for the CC2500 2.4GHz RF transceiver module
It measures 34.4 × 26.4 mm and has 4 copper layers, 1.61 mm thick.
40 parts, built around the CC2500RGP, TPS7A2033PDBV and SDD32A05L01. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the matthewgpetrin/odc-cc2500 repository on GitHub, at the commit this page was made from: the board is kicad/odc-cc2500.kicad_pcb and its schematic kicad/odc-cc2500.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask matthewgpetrin before reusing the design.