12 layers232 × 250 mm
KlusterLab r2.0
PCB-Arts/fast-open-switch-hardware
KlusterLab is an open FPGA development platform designed for experimenting with high-speed interfaces and formally verified IP cores.
1,169 parts15
4 layers65 × 56.5 mm
Sailor Hat for Raspberry Pi hardware design files
- Size
- 65 × 56.5 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 168
- Nets
- 118
- Pads
- 540
- Tracks, vias
- 925, 364
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Jan 2020
- Updated
- 6 Aug 2026
Overview
SH RPi is an open-source printed circuit board by hatlabs, from the hatlabs/SH-RPi-hardware repository on GitHub. It is a 4-layer board of 65 × 56.5 mm with 168 parts on 118 nets, routed with 925 tracks and 364 vias.
It is built around the LMV321-TR, RT6365GSP and COS1333TR, with the HT7533-1, PCF8563T/5 and 1N5819WS among its other parts. Its parts include 55 resistors, 39 capacitors, 25 diodes, 11 connectors and 10 ICs. It belongs with the computers and single-board computers boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
12
LMV321-TR
SOT-23-5-1.05V~2.75V -40℃~+125℃ 1 1MHz 1pA 1pA 2.1V~5.5V 2.7uV/℃ 27nV/√Hz@1kHz 3.5mV 40uA 600V/ms 70dB 84mA Built-in compensation、EMI filtering/RF suppression Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSGainsilOperational Amplifier
RT6365GSP
SOP-8-EP-40℃~+150℃@(TJ) 1 100uA 2.5MHz 4V~60V 5A 800mV~60V Adjustable Buck Buck Built-in No SOP-8-EP DC-DC Converters ROHSRichtek TechDC-DC ConvertersCOS1333TR
SOT-23-5-40℃~+125℃ -900mV~2.75V 1 1.8V~5.5V 120dB 18uA 200V/ms 20uV 350kHz 3pA 50nV/℃ 70nV/√Hz@1kHz 70pA 7mA Built-in compensation、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSCOSINEOperational AmplifierHT7533-1
SOT-23-5-40℃~+85℃@(Ta) 1 100mA 2.5uA 25mV@(1mA) 3.3V 30V Fixed Positive SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSHOLTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PCF8563T/5
SO-8-40℃~+85℃ 0.25uA 1V~5.5V Battery low-voltage detection、Programmable clock output、Alarm function、Countdown timer I2C Yes SO-8 Real Time Clocks ROHSNXP SemiconductorsReal Time Clocks
1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky Diodes
ESD5451N
DFN1006-2(0402)-55℃~+125℃ 1 13V 5.5A 5V 8.4V 80nA 90W Bidirectional ESD IEC 61000-4-2 DFN1006-2(0402) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes
SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesBZT52C3V3S
SOD-323Zener Diodeshongjiacheng
FXL0420-1R0-M
SMD,4.4x4.2mm1uH 27mΩ 6A 7A Molded inductor ±20% SMD,4.4x4.2mm Molding Power Inductors ROHScjiangPower Inductors
README
README.mdSailor Hat for Raspberry Pi (SH-RPi)
Introduction
The Sailor Hat for Raspberry Pi (SH-RPi) is a versatile power management board designed for the Raspberry Pi and similar single-board computers. With the SH-RPi connected, you can create deeply integrated servers that shut down safely when power is turned off and wake up automatically when power is restored.
SH-RPi supports all Raspberry Pi models with a 40-pin GPIO header (every model since the Pi 1 Model B+). Additionally, it is compatible with Raspberry Pi Compute Module 4 boards and other single-board computers that have a 40-pin Raspberry Pi-compatible GPIO header or an external I2C interface with a 5V power input.
The documentation site has details on the hardware and software features of the board.
This repository contains the KiCad hardware design files for Sailor Hat. There are two other related repositories: firmware and daemon.
The documentation site is at docs.hatlabs.fi/sh-rpi. The devices are available for purchase at shop.hatlabs.fi.
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C305, C306, C311, C312, C403, C406, C803, C1001, C1002, C1003 |
| 7 | 300k | Resistor_SMD:R_0402_1005Metric | R304, R1004, R1007, R1010, R1014, R1016, R1018 |
| 6 | 10uF 50V | Capacitor_SMD:C_1206_3216Metric | C301, C302, C702, C703, C704, C705 |
| 6 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D502, D504, D901, D1001, D1002, D1003 |
| 6 | 1k | Resistor_SMD:R_0402_1005Metric | R206, R408, R501, R502, R503, R504 |
| 5 | ESD5451N | Diode_SMD:D_0402_1005Metric | D401, D402, D501, D503, D505 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R303, R311, R407, R409 |
| 4 | 150k | Resistor_SMD:R_0402_1005Metric | R402, R1005, R1008, R1011 |
| 4 | LMV321-TR | Package_TO_SOT_SMD:SOT-23-5 | U303, U1001, U1002, U1003 |
| 4 | MountingHole | SH-RPi:MountingHole_Pi_2.75mm_M2.5 | H601, H602, H603, H604 |
| 4 | WHITE LED | LED_SMD:LED_0603_1608Metric | D506, D507, D508, D509 |
| 3 | 100R | Resistor_SMD:R_0402_1005Metric | R308, R405, R406 |
| 3 | 120k | Resistor_SMD:R_0402_1005Metric | R1006, R1009, R1012 |
| 3 | 1N4148WT | Diode_SMD:D_SOD-523 | D201, D302, D305 |
| 3 | 330k | Resistor_SMD:R_0402_1005Metric | R1013, R1015, R1017 |
| 3 | 33k | Resistor_SMD:R_0402_1005Metric | R1001, R1002, R1003 |
| 3 | CAS SCAP 3.0V20F | SH-RPi:CP_Radial_D12.6mm_H26.0mm_P5.30mm_Horizontal | C1004, C1005, C1006 |
| 3 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1001, Q1002, Q1003 |
| 2 | 100k | Resistor_SMD:R_0402_1005Metric | R302, R410 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C203, C308 |
| 2 | 1N4148WS | Diode_SMD:D_SOD-323 | D801, D802 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C404, C405 |
| 2 | 33pF 50V | Capacitor_SMD:C_0603_1608Metric | C401, C402 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R306, R313 |
| 2 | 47uF 16V | Capacitor_SMD:C_1210_3225Metric | C309, C310 |
| 2 | 47uF 6.3V | Capacitor_SMD:C_1210_3225Metric | C204, C205 |
| 2 | 5.1R | Resistor_SMD:R_0603_1608Metric | R202, R309 |
| 2 | 68k | Resistor_SMD:R_0402_1005Metric | R204, R307 |
| 2 | BZT52C3V3S | Diode_SMD:D_SOD-323 | D301, D304 |
| 2 | Conn_01x02 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal | J101, J502 |
| 2 | FXL0420-1R0-M | SH-RPi:L_MWSA0402 | L201, L702 |
| 2 | GZ2012D601TF | Inductor_SMD:L_0805_2012Metric | FB401, FB402 |
| 2 | MMBT5551 | Package_TO_SOT_SMD:SOT-23 | Q301, Q302 |
| 2 | RT6365 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U201, U301 |
| 1 | 1.5k | Resistor_SMD:R_0402_1005Metric | R310 |
| 1 | 100nF 50V | Capacitor_SMD:C_0603_1608Metric | C701 |
| 1 | 10S45SP | SH-RPi:SS5U100_TO-277 | D702 |
| 1 | 10m | Resistor_SMD:R_1206_3216Metric | R301 |
| 1 | 10uF 6.3V | Capacitor_SMD:C_0402_1005Metric | C902 |
| 1 | 12T.40000063AG12S1B02 | Fuse:Fuse_1206_3216Metric | F701 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R205 |
| 1 | 1R | Capacitor_SMD:C_0603_1608Metric | R701 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C801 |
| 1 | 1uF 16V | Capacitor_SMD:C_0402_1005Metric | C901 |
| 1 | 1uF 50V | Capacitor_SMD:C_0603_1608Metric | C303 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric | R403 |
| 1 | 220nF | Capacitor_SMD:C_0402_1005Metric | C307 |
| 1 | 22pF C0G | Capacitor_SMD:C_0603_1608Metric | C802 |
| 1 | 27k | Resistor_SMD:R_0402_1005Metric | R203 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R404 |
| 1 | 3.3k | Resistor_SMD:R_0402_1005Metric | R314 |
| 1 | 3.3nF | Capacitor_SMD:C_0402_1005Metric | C202 |
| 1 | 3.9k | Resistor_SMD:R_0402_1005Metric | R316 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D2.0mm | TP901 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C201 |
| 1 | 470k | Resistor_SMD:R_0402_1005Metric | R312 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric | C304 |
| 1 | 5.0SMDJ33CA | Diode_SMD:D_SMC | D701 |
| 1 | 510R | Resistor_SMD:R_0402_1005Metric | R305 |
| 1 | 51k | Resistor_SMD:R_0402_1005Metric | R201 |
| 1 | 56k | Resistor_SMD:R_0402_1005Metric | R401 |
| 1 | 7.5k | Resistor_SMD:R_0402_1005Metric | R315 |
| 1 | ATtiny1616-MNR | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U401 |
| 1 | Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm | JP801 |
| 1 | CE logo | Symbol:CE-Logo_8.5x6mm_SilkScreen | P606 |
| 1 | COS1333TR | Package_TO_SOT_SMD:SOT-23-5 | U302 |
| 1 | Conn_01x03 | SH-RPi:BatteryHolder_Myoung_MY-1220-03 | J801 |
| 1 | Conn_02x02 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J301 |
| 1 | Conn_02x02_Top_Bottom | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J401 |
| 1 | Conn_02x06_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J402 |
| 1 | HL pictogram | SH-RPi:HL_pictogram_6.3mm | P601 |
| 1 | HT7533-1 | Package_TO_SOT_SMD:SOT-23 | U901 |
| 1 | Hat Labs logo | SH-RPi:Hat_Labs_25.4mm | P602 |
| 1 | LBSS84LT1G | Package_TO_SOT_SMD:SOT-23 | Q303 |
| 1 | MSK340A | Diode_SMD:D_SMA | D202 |
| 1 | OSHW logo | Symbol:OSHW-Logo_11.4x12mm_SilkScreen | P603 |
| 1 | Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP501 |
| 1 | PCAQ7060MW-102 | SH-RPi:L_CMF7060F | L701 |
| 1 | PCF8563T | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U801 |
| 1 | Raspberry_Pi_2_3 | SH-RPi:PassthroughPinSocket_FH-00339_2x40_P2.54mm_Vertical_Bottom | J501 |
The 159 most common of 168 parts.
Similar boards
- 2 layers90 × 86.5 mm
Panel
huming2207/gingerlight
Horticulture lighting for growing sand ginger (or other Asian veggies)
187 parts - 4 layers86 × 56 mm
- 6 layers187 × 109 mm
- 2 layers70 × 140 mm
FreeBot main v1.1b
KULeuven-CapBot/ICRA2025_BatteryFreeRobot
CapBot's hardware is designed using KiCad, the design files are provided under HardwareDesign.
194 parts3 - 4 layers241.3 × 180.3 mm
- 2 layers122 × 87 mm
- 4 layers24.5 × 89 mm
Questions
How big is the SH RPi PCB?
It measures 65 × 56.5 mm and has 4 copper layers, 1.59 mm thick.
What parts does the SH RPi use?
168 parts, built around the LMV321-TR, RT6365GSP, COS1333TR and HT7533-1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SH RPi KiCad files?
From the hatlabs/SH-RPi-hardware repository on GitHub, at the commit this page was made from: the board is SH-RPi.kicad_pcb and its schematic IO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SH RPi design in my own project?
Its repository states no licence, so its author keeps all rights: ask hatlabs before reusing the design.