
GM100
mymy49/GM100
This is an open project created using Nuvoton's M467 MCU for use in gauges or meters.

yss OS를 사용한 오픈 소스/회로 PLC 프로젝트입니다.
Open PLC Project is an open-source printed circuit board by mymy49, from the mymy49/Open-PLC-Project repository on GitHub, published under the MIT licence. It is a 2-layer board of 122 × 87 mm with 251 parts on 238 nets.
It is built around the LMV321-TR, B0505S-1W and CA-IS3052CW, with the CA-IS3082WX, TP2584-SR and TPS560430XDBV among its other parts. Its parts include 125 resistors, 70 capacitors, 21 ICs, 18 diodes and 2 inductors.
yss OS를 사용한 오픈 소스/회로 PLC 프로젝트입니다.
중국의 LCSC ELECTRONICS에서 '전자 부품' + 'PCB' + 'SMT' 주문을 한번에 진행할 수 있는 자료를 모두 오픈할 계획입니다. 누구나 PCB를 주문해서 거의 완성된 상태로 받아볼 수 있도록 할 계획입니다. 보드의 전체 기능이 yss OS 기반에서 제어 가능한 소스코드를 다운로드하여 필요한 동작을 구현하는 프로젝트입니다.
Base Board는 기본적인 소량의 디지털 I/O, 릴레이, AIN, AOUT을 갖출 계획입니다. 부족한 기능은 외부에 보드를 추가해 CAN으로 서로 통신하며 기능을 보완하는 것을 계획하고 있습니다.
케이스는 총 40핀으로 구성되어 있습니다. 핀맵은 아래와 같이 구성됩니다.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 54 | WR06X1002FTL | SMR:0603 | R16, R17, R100, R101, R106, R107, R108, R109, R112, R113, R114, R115, R120, R121, R122, R123 +38 |
| 33 | 0603B104K500 | SMC:0603 | C1, C4, C10, C17, C18, C19, C20, C21, C22, C29, C30, C35, C36, C40, C42, C43 +17 |
| 30 | WR06X4701FTL | SMR:0603 | R1, R2, R23, R32, R34, R36, R37, R38, R39, R40, R41, R42, R43, R44, R45, R46 +14 |
| 16 | KDS226 | SOT:SOT23 | D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18 |
| 16 | WR06X3302FTL | SMR:0603 | R74, R75, R76, R77, R88, R89, R90, R91, R102, R103, R104, R105, R116, R117, R118, R119 |
| 14 | 0603B101K500 | SMC:0603 | C39, C41, C48, C49, C50, C54, C55, C56, C60, C61, C62, C66, C67, C68 |
| 8 | BLM18KG121TN1D | SML:0603 | BD1, BD2, BD3, BD4, BD5, BD6, BD7, BD8 |
| 8 | WR06X1001FTL | SMR:0603 | R82, R83, R96, R97, R110, R111, R124, R125 |
| 6 | 1210B225K101 | SMC:1210 | C11, C12, C13, C14, C15, C16 |
| 4 | 0603N120J500 | SMC:0603 | C2, C3, C5, C6 |
| 4 | 0603X106K100 | SMC:0603 | C23, C24, C25, C26 |
| 4 | 0805B475K160 | SMC:0805 | C31, C32, C37, C38 |
| 4 | 1206B225K500 | SMC:0805 | C27, C28, C33, C34 |
| 4 | HOLE-PAD-7.0-3.2 | Hole:Hole_7_0_3_2 | H1, H2, H3, H4 |
| 4 | LMV321-TR | SOT:SOT-23-5L | U14, U16, U18, U20 |
| 4 | TP2584-SR | SO:SOIC-14 | U15, U17, U19, U21 |
| 4 | WR06X0000JTL | SMR:0603 | R12, R13, R14, R15 |
| 2 | B0505S-1W | ReSine PS:BXXS-1W | U6, U8 |
| 2 | BTS5200-4EKA | infineon:PG-DSO-14-48-EP | U10, U11 |
| 2 | LM239DR2G | SO:SOIC-14 | U12, U13 |
| 2 | SWPA5040S150MT | Sunlord:SWPA5040S | L1, L2 |
| 2 | TPS560430XDBV | TI:DBV0006A | U4, U5 |
| 2 | WR06X1201FTL | SMR:0603 | R24, R33 |
| 2 | WR06X2003FTL | SMR:0603 | R5, R7 |
| 2 | WR06X2212FTL | SMR:0603 | R9, R11 |
| 2 | WR06X4123FTL | SMR:0603 | R4, R6 |
| 2 | WR06X4700FTL | SMR:0603 | R35, R53 |
| 1 | 0603X225K100 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8 |
| 1 | 1532H4-12000JWPDTSNL | CRYSTAL:CRSTAL_SMD_3225-4Pin | X2 |
| 1 | CA-IS3052CW | SO:SOIC-16-WB | U7 |
| 1 | CA-IS3082WX | SO:SOIC-16-WB | U9 |
| 1 | GT-CR1632-1Au | G-Switch:GT-CR1632-1Au | B1 |
| 1 | M433LE8AE | LQFP:LQFP48 | U3 |
| 1 | MB85RC16PNF-G-JNE | SO:SOIC-8 | U1 |
| 1 | NUP2105LT1G | SOT:SOT23 | D1 |
| 1 | PSM712-ES | SOT:SOT23 | D2 |
| 1 | SL1307ZN+T | SO:SOIC-8 | U2 |
| 1 | WR06W3R30FTL | SMR:0603 | R3 |
| 1 | WR06X5102FTL | SMR:0603 | R10 |
| 1 | WR06X8872FTL | SMR:0603 | R8 |
| 1 | XKXGI-SUA-32.768K | CRYSTAL:SMD_3215_2Pin | X1 |

mymy49/GM100
This is an open project created using Nuvoton's M467 MCU for use in gauges or meters.

magic-alt/fpga-servo
This directory preserves the ADS8588S legacy PCB, native project and custom rules from b0172a2f65902c7281cf4a8454f192dc791a9ef9.

saikhamhein/benchswitch-usb-dut-hub
BenchSwitch USB DUT Hub: a four-port USB 2.0 hardware development prototype with KiCad design sources, BOM, manufacturing files, and bring-up documentation.

xeno3dev/LumaDD
LumaDD is a Custom Display Driver Board designed around a display I got off Alibaba, with Touch Support. It features HDMI -> MIPI DSI video signal conversion, USB-C for Touch Signals + Power, as well as an onboard…



a3-audio/a3-motion
The 4-channel motion sampler of A³ Audio. It records movements on a touchscreen sphere and plays them back in time with the beat, steering each channel's position on A³ Core over OSC.

It measures 122 × 87 mm and has 2 copper layers, 1.6 mm thick.
251 parts, built around the LMV321-TR, B0505S-1W, CA-IS3052CW and CA-IS3082WX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the mymy49/Open-PLC-Project repository on GitHub, at the commit this page was made from: the board is Base/Schematic/Open-PLC-Project.kicad_pcb and its schematic Base/Schematic/AIN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).