

GM100
This is an open project created using Nuvoton's M467 MCU for use in gauges or meters.
- Size
- 124 × 75 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 168
- Nets
- 213
- Pads
- 609
- Tracks, vias
- 1,518, 248
- Pours
- 43
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 May 2026
- Updated
- 23 Sep 2026
Overview
GM100 is an open-source printed circuit board by mymy49, from the mymy49/GM100 repository on GitHub, published under the MIT licence. It is a 2-layer board of 124 × 75 mm with 168 parts on 213 nets, routed with 1,518 tracks and 248 vias.
It is built around the M467KJHAN, CA-IF1042LVS-Q1 and CS485S, with the TPS560430XDBV, W25Q256JVEIQ and W956A8MBYA5I among its other parts. Its parts include 56 capacitors, 55 resistors, 9 diodes, 8 ICs and 6 connectors.
Main components
12M467KJHAN
LQFP-128(14X14)-40℃~+85℃ 1.7V~3.6V 100 1MB 200MHz 32 Bit 512KB ARM Cortex-M4F Built-in+External FLASH LQFP-128(14X14) Microcontrollers (MCU/MPU/SOC) ROHSNuvoton TechMicrocontrollers (MCU/MPU/SOC)CA-IF1042LVS-Q1
SOIC-8-40℃~+125℃ 4.5V~5.5V 5Mbps 5uA 80mA CAN FD Transceiver SOIC-8 CAN Transceivers ROHSChipanalogCAN TransceiversCS485S
SOIC8(S)-40℃~+125℃ 1 1 250Kbps 3V~5.5V 50 950uA Half-Duplex Transceiver ±18kV SOIC8(S) RS-485 / RS-422 ICs ROHSChipanalogRS-485 / RS-422 ICsTPS560430XDBV
SOT-23-6-40℃~+125℃@(TJ) 1 1.1MHz 4V~36V 600mA 80uA Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersW25Q256JVEIQ
WSON-8-EP(6x8)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 133MHz 2.7V~3.6V 20 Years 256Mbit 700us SPI WSON-8-EP(6x8) NOR FLASH ROHSWinbond ElecNOR FLASHW956A8MBYA5I
TFBGA-24-40℃~+85℃ 2.7V~3.6V 200MHz 64Mbit TFBGA-24 Random Access Memory (RAM) ROHSWinbond ElecRandom Access Memory (RAM)SD-01A
SMD1.9mm Connector and Ejector MicroSD Card (TF Card) Push-Pull With Locating Pins SMD SD Card / Memory Card Connector ROHSHRO ElectronicsSD Card / Memory Card ConnectorFM24CL04B-G
SOIC-8SOIC-8 FRAM ROHSInfineon TechnologiesFRAM0603B104K500
06030603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSWalsin TechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMTBLM18KG121TN1D
06031 120Ω@100MHz 30mΩ 3A ±25% 0603 Ferrite Beads ROHSMurataFerrite BeadsWR06X1002FTL
0603-55℃~+155℃ 100mW 10kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSWalsin TechnologyChip Resistor - Surface Mount0805B475K160NT
080516V 4.7uF X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSGuangdong Fenghua Advanced Tech (FH)Multilayer Ceramic Capacitors MLCC - SMD/SMT
Parts
168| Qty | Value | Footprint | References |
|---|---|---|---|
| 29 | 0603B104K500 | SMC:0603 | C1, C2, C3, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C22, C31, C32 +13 |
| 26 | BLM18KG121TN1D | SML:0603 | BD1, BD2, BD10, BD11, BD12, BD13, BD14, BD15, BD16, BD17, BD18, BD19, BD20, BD21, BD22, BD23 +10 |
| 22 | WR06X0000JTL | SMR:0603 | R1, R2, R3, R4, R5, R10, R11, R12, R13, R17, R18, R19, R33, R34, R35, R36 +6 |
| 12 | WR06X1002FTL | SMR:0603 | R20, R22, R23, R27, R28, R29, R30, R31, R32, R48, R49, R50 |
| 10 | 0805B475K160 | SMC:0805 | C27, C28, C29, C30, C37, C38, C39, C40, C41, C42 |
| 7 | 0603B105K250 | SMC:0603 | C6, C8, C10, C25, C26, C43, C44 |
| 5 | KDS226 | SOT:SOT23 | D1, D2, D3, D5, D6 |
| 4 | 1206B226K100 | SMC:1206 | C51, C52, C53, C54 |
| 4 | HOLE-PAD-7.0-3.2 | Hole:Hole_7_0_3_2 | H1, H2, H3, H4 |
| 4 | WR06X2000FTL | SMR:0603 | R16, R45, R46, R47 |
| 4 | WR06X4701FTL | SMR:0603 | R14, R15, R24, R25 |
| 2 | 0603N120J500 | SMC:0603 | C21, C23 |
| 2 | 0805X106K100 | SMC:0805 | C24, C47 |
| 2 | TPS560430XDBV | TI:DBV0006A | U5, U6 |
| 2 | WR06W3R30FTL | SMR:0603 | R21, R26 |
| 2 | WR06X2003FTL | SMR:0603 | R38, R40 |
| 2 | WR06X2212FTL | SMR:0603 | R42, R44 |
| 2 | WR06X4123FTL | SMR:0603 | R37, R39 |
| 2 | WR06X5101FTL | SMR:0603 | R53, R54 |
| 1 | 2N7002K-7 | SOT:SOT23 | Q1 |
| 1 | AFC24-S06FIA-00 | Connector_FPC:JUSHUO_AFC24-S06FIA-00 | J4 |
| 1 | AFC24-S40FIA-00 | Connector_FPC:JUSHUO_AFC24-S40FIA-00 | J3 |
| 1 | CA-IF1042LVS-Q1 | SO:SOIC-8 | U7 |
| 1 | CF4012M00020 | CRYSTAL:CRSTAL_SMD_3225-4Pin | X1 |
| 1 | CS485S | SO:SOIC-8 | U8 |
| 1 | ESD5Z3.3T1G-MS | Diode_SMD:SOD523 | D4 |
| 1 | FM24CL04B-G | SO:SOIC-8 | U3 |
| 1 | GT-USB-7010ASV | G-Switch:GT-USB-7010ASV | CN2 |
| 1 | HC-JN254-2-05-W | IDC:HCTL_HC-JN254-2-05-W | J1 |
| 1 | M467KJHAN | LQFP:LQFP-128_14x14mm_P0.4mm | U4 |
| 1 | NUP2105LT1G | SOT:SOT23 | D8 |
| 1 | PSM712-ES | SOT:SOT23 | D9 |
| 1 | RVT0J471M0607 | Capacitor_SMD:CP_Elec_6.3x7.7 | C55 |
| 1 | SD-01A | Korean_Hroparts_Elec:SD-01A | J2 |
| 1 | SJD12A05L01 | Diode_SMD:SOD123 | D7 |
| 1 | VEJ471M1CTR-0810 | Capacitor_SMD:CP_Elec_8x10 | C56 |
| 1 | W25Q256JVEIQ | WSON:8-WSON_8x6 | U1 |
| 1 | W956A8MBYA5I | BGA:TFBGA24_6x8mm_P1.00mm | U2 |
| 1 | WJ2EDGRC-5.08-4P | Plugable Terminal:KANGNEX_WJ2EDGRC-5.08-4P | CN1 |
| 1 | WR06X1003FTL | SMR:0603 | R55 |
| 1 | WR06X5102FTL | SMR:0603 | R41 |
| 1 | WR06X8871FTL | SMR:0603 | R43 |
| 1 | XRNR4030-22uH/M | Inductor_SMD:XR_XRNR4030 | L1 |
| 1 | XRNR4030-33uH/M | Inductor_SMD:XR_XRNR4030 | L2 |
Similar boards
- 2 layers122 × 87 mm

- 2 layers19 × 19 mm

PBSEQ D2
CIRCUITSTATE/PBSEQ-D2
A simple push-button controlled power sequencer circuit demo board.
22 parts1 - 4 layers70 × 50 mm

PD Smart Supply
JaphD/USB-C-PD-Smart-Power-Supply
A compact STM32-controlled USB-C Power Delivery supply providing selectable 5 V, 9 V, 12 V, and 20 V outputs up to 3 A.
73 parts - 2 layers50 × 50 mm

- 2 layers65 × 56 mm

Interface board
TrendBit/SMBR-hardware
Design file for SMBR hardware modules in KiCAD.
133 partsGPL-3.0 - 2 layers59 × 29 mm

Table display
yeyintlwin/kicad-board-design
Design a two-layer KiCad PCB entirely from Python scripts - no GUI step, no commercial autorouter
53 partsMIT - 2 layers344.4 × 130.8 mm

- 2 layers284.7 × 94.2 mm

Questions
How big is the GM100 PCB?
It measures 124 × 75 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GM100 use?
168 parts, built around the M467KJHAN, CA-IF1042LVS-Q1, CS485S and TPS560430XDBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GM100 KiCad files?
From the mymy49/GM100 repository on GitHub, at the commit this page was made from: the board is Schematics/ES.1/GM100.kicad_pcb and its schematic Schematics/ES.1/CAN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GM100 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).