

ESP32-Touch board
Smart Home Projects
- Size
- 43 × 43 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 55
- Pads
- 186
- Tracks, vias
- 388, 113
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Aug 2022
- Updated
- 21 Mar 2023
Overview
ESP32-Touch board is an open-source printed circuit board by kamil2466, from the kamil2466/SiD-ON repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 43 × 43 mm with 49 parts on 55 nets, routed with 388 tracks and 113 vias.
It is built around the ESP32-C3-MINI-1-N4, SN65HVD230D and XL1509-3.3, with the 1N5819WS, BC817 and 100UF/35V among its other parts. Its parts include 17 resistors, 10 capacitors, 8 diodes, 5 connectors and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
9ESP32-C3-MINI-1-N4
SMD,16.6x13.2mm-40℃~+85℃ -98dBm 20.5dBm 350mA 3V~3.6V 84mA Integrated temperature sensor、Integrated antenna、Built-in watchdog On-board PCB Antenna SPI、UART、I2C、I2S、USB Transceiver SMD,16.6x13.2mm WiFi Modules ROHSEspressif SystemsRF ModulesSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversXL1509-3.3
SOP-8-40℃~+125℃@(TJ) 1 150kHz 2A 2mA 3.3V 4.5V~40V Buck Buck Built-in Fixed No SOP-8 DC-DC Converters ROHSUMWDC-DC Converters1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)100UF/35V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedACT45B-510-2P
Common Mode Filters For Automotive Signal Line, TDK ACT SeriesTDKUncategorisedBSMD1206-100-24V
1206-40℃~+85℃ 1.4mm 1.8A 1.9mm 1A 1W 24V 3.6mm 300ms 300mΩ 40A 50mΩ 1206 Resettable Fuses ROHSBHFUSEResettable FusesPESD1CAN
SOT-23-65℃~+150℃ 11pF 1nA 2 200W@8/20us 24V 30.3V 3A@8/20us 70V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSNexperiaESD And Surge Protection (TVS/ESD)
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k/R0603 | Resistor_SMD:R_0603_1608Metric | R1, R10, R11, R12, R15, R16, R17 |
| 5 | LED_RED/L0603 | LED_SMD:LED_0603_1608Metric | D2, D3, D6, D7, D8 |
| 3 | 1.2k/R0603 | Resistor_SMD:R_0603_1608Metric | R2, R3, R9 |
| 3 | 100nF/C0603 | Capacitor_SMD:C_0603_1608Metric | C2, C4, C9 |
| 3 | 10uF/C0805 | Capacitor_SMD:C_0603_1608Metric | C1, C8, C10 |
| 2 | 0k/R0603 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 1.2k | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 100pF/C0603 | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323_HandSoldering | D1, D4 |
| 2 | 22R/R0603 | Resistor_SMD:R_0603_1608Metric | R13, R14 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100uF/35v | Capacitor_SMD:CP_Elec_6.3x7.7 | C3 |
| 1 | 120R/R0603 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 47uF/C1206 | Capacitor_SMD:C_1206_3216Metric | C7 |
| 1 | 47uH/900mA | Inductor_SMD:L_Sunlord_SWPA5040S | L2 |
| 1 | ACT45B-510 | ACT45B:FIL_ACT45B-510-2P-TL003 | L1 |
| 1 | BSMD1206-100-24V | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | BUS_PINS | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | ESP32-C3-MINI-1-N4 | ESP32-C3-MINI-1-N4:XCVR_ESP32-C3-MINI-1-N4 | U3 |
| 1 | JUMPER 120R | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | J3 |
| 1 | LOGO | boneio - expansion module WT32-ETH01:8mm | G*** |
| 1 | PESD1CAN | Package_TO_SOT_SMD:SOT-23 | D5 |
| 1 | PROG | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J5 |
| 1 | SN65HVD230 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | Screw_Terminal_01x04 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_4-G-3.81_1x04_P3.81mm_Vertical | J1 |
| 1 | TOUCH_PINS | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | XL1509-3.3 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U2 |
More from kamil2466/SiD-ON
2- 2 layers47 × 45 mm

- 2 layers47 × 45 mm

Similar boards
- 2 layers67.8 × 86.9 mm

- 4 layers56 × 43.3 mm

- 4 layers50 × 30 mm

- 4 layers88 × 70 mm

- 2 layers100 × 100 mm

- 2 layers155 × 80 mm

- 4 layers85.9 × 37.1 mm

MCL Accel
Aztro-dev/MCL-Accel
Monte-Carlo Localization Accelerator board for the Vex V5 system
45 parts - 4 layers80 × 80 mm

Flightcomputer2
UTS-Rocketry/ODIN-FlightController2026
Primary avionics flight controller for the 2026 AURC rocket.
114 parts1
Questions
How big is the ESP32-Touch board PCB?
It measures 43 × 43 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP32-Touch board use?
49 parts, built around the ESP32-C3-MINI-1-N4, SN65HVD230D, XL1509-3.3 and 1N5819WS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP32-Touch board KiCad files?
From the kamil2466/SiD-ON repository on GitHub, at the commit this page was made from: the board is SiD-Touch/KiCad/ESP32-Touch_board/ESP32-Touch_board.kicad_pcb and its schematic SiD-Touch/KiCad/ESP32-Touch_board/ESP32-Touch_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP32-Touch board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).