4 layers62.1 × 83.8 mm
Ss main board
loopj/short-stack
World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs
69 parts804
Boards using the ATTINY1616-MN
103 boardsBoards in 71 GitHub repositories, designed in KiCad, that use the ATTINY1616-MN by Microchip Technology (-40℃~+105℃ 1.8V~5.5V 10bit 16KB 18 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATTINY1616-MN’s symbol, footprint and pinout are on its own page.
- 2 layers80 × 50 mm
- 4 layers100 × 68 mm
- 2 layers56.9 × 23.6 mm
Hexagon
kieraneglin/hexagon-art
A passive breakout board: two lever-terminal inputs, three JST XH outputs, all six conductors (RX bus, two spares, +12V, GND, +5V) paralleled straight across. No active components, no regulation, nothing to configure.
24 parts19 - 4 layers44.5 × 44.5 mm
Flashlight
engineerbo/flashlight-dev-hw
This repository contains design files for the development board for a flashlight boost driver. The test firmware can be found in the firmware repository.
73 parts15MIT - 2 layers29 × 36 mm
Flux Capacitor Micro Pin Badge
hojadurdy/Flux_Capacitor_Micro
A tiny (36mm x 29mm) pin badge and keychain PCB version of Flux Capacitor featuring 25 animated LEDs that animate to create the “fluxxing” effect.
48 parts6 - 4 layers50.3 × 21.5 mm
- 2 layers25.4 × 52 mm
- 2 layers55.5 × 55 mm
WiiRegStripLite
MertX2/PowerStripHavoc
Its name is a combination of loopj's PowerStrip, which is the base of this project, and the Havoc weapon from Apex Legends.
74 parts2 - 2 layers13.1 × 21.7 mm
Attiny16-breakout
sunpazed/attiny16-breakout
To keep things small (DIP-16), only a subset of pins are avalable — Port A pins (PA0-PA6) and Port B pins (PB0-PB5), along with a single PC0 pin;
3 parts2GPL-3.0 - 4 layers52.5 × 80 mm
- 2 layers88.9 × 50.8 mm
- 2 layers43.6 × 25.5 mm
BikeUSBv2
H3wastooshort/BikeUSBv2
Charge your Phone off of your Bike while adapting charging power to available power / riding speed.
63 parts1GPL-3.0 - 2 layers25.5 × 12 mm
SparkV1
JoaoWMHentz/WickV1
Este repositório contém o firmware do WICK V1, desenvolvido para microcontroladores AVR da família ATtiny, como o ATtiny1616, utilizando sinais PPM para controle e PWM para acionamento dos motores.
31 parts1 - 2 layers29 × 48.5 mm
Mailbox beacon
pavel-d/mail-beacon
The Mailbox Beacon is a device that detects when a new letter or package has been delivered to your mailbox using a reed switch.
28 parts1 - 2 layers88.9 × 50.8 mm
Insert Coin Business Card
PowerPlane/insert-coin
The "Insert Coin" cards are PCB-as-business-card builds where the coin cell is the user interaction: slide it into the holder and the card boots, blinks, listens, taps NFC, then sleeps.
44 parts1 - 2 layers85.6 × 54 mm
Business card pcb
roepkefeller/business-card-pcb
A PCB business card that shows you your own pulse. Optical PPG sensor drives a ten-LED heart; NFC tag serves the vCard with the card switched off. ATtiny1616, MAX30102, CR2032.
59 parts1 - 4 layers30 × 430 mm
Candle
unit117/butterflynet
This folder contains the KiCad candle hardware artifact for the agent pipeline demo. The design target is the v5 modernized direction described in candlespecv5modernized.md: a tall, exposed LED stem inspired by the My…
272 parts1MIT - 2 layers77 × 62 mm
Blower controller
10htts/5S-Blower-Controller
Open-source reference controller for a two-wire brushed-DC blower powered by a removable 5-series lithium-ion battery (approximately 15–21 V).
70 parts - 2 layers75.2 × 44.7 mm
ATtinyBadge RevA
bckircher/ATtinyBadge
Wearable LED badge based on an ATtiny1616 microcontroller
50 partsBSD-3-Clause - 2 layers75 × 75 mm
- 2 layers55 × 25 mm
- 2 layers25.4 × 25.4 mm
- 2 layers25.4 × 25.4 mm
CE PiicoDev Buzzer
CoreElectronics/CE-PiicoDev-Buzzer
Hardware repo for the Core Electronics PiicoDev Buzzer Module
32 parts