
WiiRegStripLite
MertX2/PowerStripHavoc
Its name is a combination of loopj's PowerStrip, which is the base of this project, and the Havoc weapon from Apex Legends.

PMS companion board for Thundervolt.
Stormbreaker is an open-source printed circuit board by VoxelTek, from the VoxelTek/Stormbreaker repository on GitHub. It is a 4-layer board of 50.3 × 21.5 mm with 49 parts on 64 nets, routed with 226 tracks and 188 vias.
It is built around the ATTINY1616-MN and BQ25895RTW. Its parts include 14 capacitors, 10 resistors, 4 ICs, 4 connectors and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Stormbreaker is a multifunction circuit board intended to be used alongside Thundervolt in Wii portables. It handles battery charging and monitoring, power switching, storage interfacing, and a bit more. See the full list of features here.
Thundervolt, while incredible, does not provide any battery management capability, nor does it provide any way for a user to toggle power to the system outside of disconnecting power from Thundervolt itself. As such, following the completion of Thundervolt, its creator YveltalGriffin began work on a companion board, named "Mjolnir". Mjolnir would handle everything from battery management to storage to fan control and more, and would integrate seamlessly with Thundervolt. However, development on Mjolnir has been temporarily halted, which pushed me to make a companion board myself. Hence, Stormbreaker was born.
In Norse mythology, Thor is the God of Thunder, and is often seen alongside his hammer, Mjolnir. In the Marvel Cinematic Universe, Thor lost Mjolnir, and instead forged an axe called Stormbreaker.
As such, it seemed fitting to name this board, born from the absense of Mjolnir, "Stormbreaker".
Functionality is largely split between the 4 ICs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C14, C16 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R9, R10, R11 |
| 3 | 1μF | Capacitor_SMD:C_0402_1005Metric | C8, C12, C15 |
| 3 | 22uF | Capacitor_SMD:C_0402_1005Metric | C5, C6, C7 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R5, R7 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 260 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 3.3uH | Stormbreaker:L_PCMB053T | L1 |
| 1 | 30.1k | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 3V3 | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 4.7μF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 5.23k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 900k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | ALERT | Stormbreaker:TestPoint_Pad_D1.0mm_Small | TP11 |
| 1 | ATtiny1616-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U3 |
| 1 | BQ25895RTW | Package_DFN_QFN:Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U1 |
| 1 | Battery_Cell | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | BT2 |
| 1 | Battery_Cell | Connector_PinSocket_1.27mm:PinSocket_1x02_P1.27mm_Vertical | BT1 |
| 1 | D+ | Stormbreaker:TestPoint_Pad_D1.0mm_Small | TP1 |
| 1 | D- | Stormbreaker:TestPoint_Pad_D1.0mm_Small | TP2 |
| 1 | FAN | Stormbreaker:TestPoint_Pad_D1.0mm_Small | TP4 |
| 1 | GL835 | Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U2 |
| 1 | GND | TestPoint:TestPoint_Pad_D2.5mm | TP9 |
| 1 | HUSB238A | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias | U4 |
| 1 | I2C | Connector_PinSocket_1.00mm:PinSocket_1x02_P1.00mm_Vertical | J5 |
| 1 | LED | Stormbreaker:TestPoint_Pad_D1.0mm_Small | TP10 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:microSD_HC_Hirose_DM3D-SF | J1 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-523 | Q2 |
| 1 | PMOS | Package_SO:Vishay_PowerPAK_1212-8_Single | Q1 |
| 1 | PROG | Stormbreaker:UPDI Pads | J3 |
| 1 | PWR | Stormbreaker:TestPoint_Pad_D1.0mm_Small | TP6 |
| 1 | SHUT | Stormbreaker:TestPoint_Pad_D1.0mm_Small | TP7 |
| 1 | SW_Push | Stormbreaker:SW_TL3330AF260QG | SW1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | VCC | TestPoint:TestPoint_Pad_D2.0mm | TP8 |
| 1 | VOUT | TestPoint:TestPoint_Pad_D2.5mm | TP5 |

MertX2/PowerStripHavoc
Its name is a combination of loopj's PowerStrip, which is the base of this project, and the Havoc weapon from Apex Legends.

SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects


brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera


Maritime-Hacking-Village/Badge-2025
Public repository for the official MHV 2025 badge.

Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard

borisg912/3DNA
This project creates a flat cylindrical DNA model with: - Magnetic DNA bases with color-coded NeoPixel LEDs and unique resistor values for identification - Interactive base pairing game that validates correct DNA base…
It measures 50.3 × 21.5 mm and has 4 copper layers, 0.8 mm thick.
49 parts, built around the ATTINY1616-MN and BQ25895RTW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the VoxelTek/Stormbreaker repository on GitHub, at the commit this page was made from: the board is KiCad/Stormbreaker.kicad_pcb and its schematic KiCad/Stormbreaker.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask VoxelTek before reusing the design.