

Tildagon base
- Size
- 83.1 × 92.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 183
- Nets
- 184
- Pads
- 1,203
- Tracks, vias
- 4,651, 693
- Pours
- 124
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 23 Nov 2023
- Updated
- 23 Jul 2026
Overview
Tildagon base is an open-source printed circuit board by emfcamp, from the emfcamp/badge-2024-hardware repository on GitHub. It is a 4-layer board of 83.1 × 92.5 mm with 183 parts on 184 nets, routed with 4,651 tracks and 693 vias.
It is built around the 74LVC1G17Z, ESP32-S3-PICO-1-N8R2 and AW9523BTQR, with the FUSB302BMPX, TLV62595DMQR and RCLAMP0524P-ES among its other parts. Its parts include 52 ICs, 50 capacitors, 46 resistors, 11 connectors and 3 switches. It belongs with the ESP32 boards of this library.
Main components
1274LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, TransceiversESP32-S3-PICO-1-N8R2
LGA-56-EP(7x7)LGA-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsAW9523BTQR
TQFN-24-EP(4x4)-40℃~+85℃ 100nA 16 2.4V~5.5V 20mA 4 400kHz 60mV I2C Interrupt Output Push-Pull、Open-drain Reset function、Cascading and address extension、Input anti-jitter、Built-in LED driver、IO level configurable TQFN-24-EP(4x4) I/O Expanders ROHSAWINICI/O ExpandersFUSB302BMPX
WFQFN-14(2.5x2.5)-40℃~+125℃ 2.8V~5.5V 25uA Controller USB 3.1 WFQFN-14(2.5x2.5) USB Converters ROHSonsemiUSB ConvertersTLV62595DMQR
VSON-6(1.5x1.5)-40℃~+125℃@(TJ) 1 10uA 2.2MHz 2.5V~5.5V 4A 600mV~4V Adjustable Buck Buck Built-in Yes VSON-6(1.5x1.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersRCLAMP0524P-ES
DFN2510-10L0.6pF 12V 1uA 4.5A 5V 60W 6V ESD Four channels IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Unidirectional DFN2510-10L ESD and Surge Protection (TVS/ESD) ROHSElecSuperESD And Surge Protection (TVS/ESD)MT9700
SOT-23-5-40℃~+85℃ 1 2.4V~5.5V 2A 80mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection SOT-23-5 Power Distribution Switches ROHS西安航天民芯Power Distribution Switches74LVC1G04Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 1.7V~2V 200uA 32mA 32mA 5ns@5V,50pF 700mV~800mV 74LVC SOT-553 Inverters ROHSDiodes IncorporatedInvertersBMI270
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2KB 3.5uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSBosch SensortecAccelerometersBQ25895RTW
WQFN-24-EP(4x4)-40℃~+85℃ 1 12uA 3.9V~14V 4.608V 5A Charging IC I2C Lithium Battery Support Support QFN-24-EP(4x4) Battery Management ROHSTexas InstrumentsBattery ManagementSC7A20
LGA-12_2.0x2.0x0.5P-1LGA-12(2x2x0.5) New Arrivals ROHSHangzhou Silan MicroelectronicsUncategorisedTS3USB221ARSE
UQFN-10(1.5x2)-40℃~+85℃ 12ns 2.3V~3.6V 250ps 2:1 30ns 6pF 6Ω 900MHz USB UQFN-10(1.5x2) Analog Switches - Special Purpose ROHSTexas InstrumentsAnalog Switches - Special Purpose
Parts
183| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | 10uF | Capacitor_SMD:C_1206_3216Metric | C10, C11, C12, C13, C14, C15, C17, C18, C19, C20, C21, C22, C23, C24, C27, C28 +12 |
| 25 | RCLAMP0524P-ES | tildagon:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U16, U17, U18, U20, U21, U22, U27, U28, U29, U30, U34, U35, U36, U37, U38, U39 +9 |
| 15 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C16, C35, C42, C43, C44, C45, C46, C47, C50 |
| 14 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R7, R10, R13, R15, R18, R21, R30, R31, R32, R33, R34, R42, R43 |
| 12 | MountingHole_Pad | tildagon:SMTSO2030CTJ | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 8 | 11k3 | Resistor_SMD:R_0402_1005Metric | R3, R8, R11, R16, R19, R22, R23, R25 |
| 8 | MT9700 | Package_TO_SOT_SMD:SOT-23-5 | U8, U9, U10, U11, U12, U13, U14, U51 |
| 7 | 2k2 | Resistor_SMD:R_0402_1005Metric | R27, R35, R36, R37, R38, R39, R40 |
| 6 | 100k | Resistor_SMD:R_0402_1005Metric | R4, R6, R9, R14, R17, R20 |
| 6 | 74LVC1G04 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U15, U19, U23, U31, U32, U33 |
| 6 | Conn_02x10_Counter_Clockwise | tildagon:SFP | J1, J2, J3, J4, J5, J6 |
| 3 | 1k | Resistor_SMD:R_0402_1005Metric | R12, R24, R26 |
| 3 | AW9523B | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.6mm | U24, U25, U26 |
| 3 | MountingHole_Pad | tildagon:SMTSO3030CTJ | H14, H16, H18 |
| 3 | SW_Push | tildagon:sidebutton-1TS003B-1400-3500A-CT | SW1, SW2, SW3 |
| 2 | 260R | Resistor_SMD:R_0402_1005Metric | R44, R45 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | C | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | FUSB302BMPX | Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U2, U5 |
| 2 | USB_C_Receptacle_USB2.0 | tildagon:USB_C_Receptacle_SHOUHAN_TYPE-C_16P_CB1.6_073 | J7, J8 |
| 1 | 120pF | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C9 |
| 1 | 2450AT07A0100 | tildagon:Johanson_2450AT07A0100_FLRight | AE1 |
| 1 | 261R | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 4.3k | Resistor_SMD:R_0402_1005Metric | R46 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 45k3 | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 74LVC1G17 | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U6 |
| 1 | BMI270 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U52 |
| 1 | BQ25895RTW | Package_DFN_QFN:Texas_S-PWQFN-N24_EP2.7x2.7mm_ThermalVias | U3 |
| 1 | Conn_01x02_MountingPin | tildagon:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J10 |
| 1 | Conn_01x08_Pin | tildagon:SOIC_clipProgSmall | J11 |
| 1 | Conn_01x30_MountingPin | tildagon:Jushuo_AFC01-S30FCC-00_1x30-1MP_P0.50mm_Horizontal | J9 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | ESP32-S3-PICO-1-N8R2 | tildagon:LGA56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
| 1 | FTC252010SR47MBCA | Inductor_SMD_Wurth:L_Wurth_WE-LQSH-2512 | L3 |
| 1 | L | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SC7A20 | Package_LGA:LGA-12_2x2mm_P0.5mm | U7 |
| 1 | SK6805MICRO-J | tildagon:LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm | D2 |
| 1 | TCA9548APWR | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U4 |
| 1 | TLV62595DMQR | tildagon:Texas_VSON-HR-6_1.5x1.5mm_P0.5mm | U43 |
| 1 | TS3USB221A | tildagon:Texas_PUQFN-10_RSE_1.5x2mm | U50 |
| 1 | YHNR4020-2R2M | Inductor_SMD_Wurth:L_Wurth_WE-LQSH-4020 | L2 |
More from emfcamp/badge-2024-hardware
4- 2 layers83.1 × 92.5 mm

- 2 layers83.1 × 92.5 mm

- 4 layers83.1 × 92.5 mm

- 2 layers33.7 × 36.6 mm

Similar boards
- 2 layers131.5 × 83.5 mm

Badge esp32-s3
BYU-I-eBadge/e-badge
A hackable eBadge platform for students — a customizable, programmable electronics badge designed for hands-on learning and creative exploration throughout their academic journey.
218 parts2MIT - 4 layers49.1 × 54.3 mm

Rp2350-hdmi hexpansion
Corteil/rp2350-hdmi-hexpansion
RP2350 HDMI hexpansion for the EMF Tildagon badge -- mirrors the badge's display to a monitor over HSTX/DVI
57 parts2 - 2 layers60 × 146.5 mm

- 2 layers

Metalite new
jls-ml/IA-HAR-wearable
Wearable device project for Human Activity Recognition using Artificial Intelligence.
55 partsGPL-3.0 - 6 layers23.4 × 22 mm

Discrete potentiostat
KJH5001212/miniaturize_no5941
discrete-potentiostat.kicadsch — KiCad 7 포맷 (KiCad 7/8/9에서 열림), 심볼 전부 파일에 내장(라이브러리 설치 불필요). discrete-potentiostat.pdf — 렌더링본.
70 parts - 4 layers88 × 155 mm

HACK CLUB RELATEDbackup
Studented0/universal-ai-terminal
A pocketable AI terminal that runs Claude Code and Ollama over LTE. Custom carrier board for a Raspberry Pi Compute Module 5, 7" AMOLED touchscreen, and its own cellular modem so it doesn't need WiFi.
104 parts1MIT - 2 layers87.9 × 71.4 mm

Meteostation
aleksul/WeatherStation
If you want a customizable solution for monitoring weather in your town, you're in the right place!
175 partsMIT - 4 layers90 × 80 mm

Glider
pdyxs/glider
Fork of zephray/glider (Modos Glider e-ink monitor) with a DP AUX polarity fix and a standalone GCC firmware build
379 partsCERN-OHL-S-2.0
Questions
How big is the Tildagon base PCB?
It measures 83.1 × 92.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Tildagon base use?
183 parts, built around the 74LVC1G17Z, ESP32-S3-PICO-1-N8R2, AW9523BTQR and FUSB302BMPX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tildagon base KiCad files?
From the emfcamp/badge-2024-hardware repository on GitHub, at the commit this page was made from: the board is tildagon-base/tildagon-base.kicad_pcb and its schematic hexpansion/hexpansion.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tildagon base design in my own project?
Its repository states no licence, so its author keeps all rights: ask emfcamp before reusing the design.