TS3USB221ARSE

Q: Is there a KiCad symbol and footprint for the TS3USB221ARSE?

Yes. The symbol is SparkFun-IC-Special-Function:TS3USB221A and the footprint Package_DFN_QFN:UQFN-10_1.6x2.1mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

Q: What package is the TS3USB221ARSE?

UQFN-10(1.5x2), with 10 pins. Its footprint is drawn on this page.

Q: Where is the TS3USB221ARSE datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Q: Where can I order the TS3USB221ARSE?

JLCPCB lists it as part C128396, with 73,779 in stock; the sellers' links on this page open their listings.

Q: What can replace the TS3USB221ARSE?

Parts like it in the library: the TS3USB221RSE by Texas Instruments, the TS3USB221ARSER-HXY by HXY MOSFET, the TS3USB3000RSER-HXY by HXY MOSFET and the PI3USB4000DQ1ZUAEX-HXY by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Q: Which open-source boards use the TS3USB221ARSE?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

Texas Instruments

-40℃~+85℃ 12ns 2.3V~3.6V 250ps 2:1 30ns 6pF 6Ω 900MHz USB UQFN-10(1.5x2) Analog Switches - Special Purpose ROHS

Extended

Datasheetti/TS3USB221ARSE

Category: Analog Switches Special Purpose
Package: UQFN-10(1.5x2)
Pins: 10

Overview

The TS3USB221ARSE is an analog Switches Special Purpose made by Texas Instruments in a UQFN-10(1.5x2) package with 10 pins. -40℃~+85℃ 12ns 2.3V~3.6V 250ps 2:1 30ns 6pF 6Ω 900MHz USB UQFN-10(1.5x2) Analog Switches - Special Purpose ROHS.

PCBKit's library has its KiCad symbol (SparkFun-IC-Special-Function:TS3USB221A, from Eagle libraries) and its footprint (Package_DFN_QFN:UQFN-10_1.6x2.1mm_P0.5mm, from KiCad's library), ready for a KiCad board. 73,779 are in stock at JLCPCB (part C128396). 10 open-source boards in 10 repositories on GitHub use it.

Symbol

SparkFun-IC-Special-Function:TS3USB221AFrom Eagle libraries

Footprint

Package_DFN_QFN:UQFN-10_1.6x2.1mm_P0.5mmFrom KiCad's library

From the datasheet

Supply, least: 2.3 V · VCC, recommended operating min · p. 4
Supply, most: 3.6 V · VCC, recommended operating max · p. 4
Supply, absolute maximum: 4.6 V · VCC, absolute max · p. 4
Works from: -40 °C · Operating free-air temperature min · p. 4
Works up to: 85 °C · Operating free-air temperature max · p. 4
Takes working: 30 µA · VCC supply current max, switch ON or OFF, no load · p. 5
Takes asleep: 1 µA · VCC low power supply current max, OE high · p. 5
A pin gives at most: 120 mA · ON-state switch current absolute max, ±120 mA · p. 4
Junction to air (RSE (UQFN)): 204.8 K/W · Junction-to-ambient thermal resistance · p. 5
Junction to case (RSE (UQFN)): 118.1 K/W · Junction-to-case top thermal resistance · p. 5
Junction to board (RSE (UQFN)): 121.5 K/W · Junction-to-board thermal resistance · p. 5
Data rate, most: 480 Mbit/s · USB 2.0 supported data rate max · p. 12

What it is and has

Switch configuration: 2-channel SPDT · p. 12
Control inputs: 1.8V compatible · p. 1
Signal tolerance: 5.5V · p. 1
Bandwidth: 900MHz typical · p. 1
Protection: ESD protection cells on all pins · p. 12
Package: RSE (UQFN, 10), 2mm × 1.5mm · p. 1

Around it

cap 0.1 μF: between VCC and GND; Supply bypass capacitor shown in the typical application; place as close to VCC as possible and away from D+/D– traces. · p. 14

Specifications

Parameter	Conditions	As printed	Page
Supply voltage VCC	Over operating free-air temperature range	min -0.5 · max 4.6 V	4
Control input voltage VS, V OE		min -0.5 · max 7 V	4
Switch I/O voltage VI/O		min -0.5 · max 7 V	4
Control input clamp current IIK	VIN < 0	max -50 mA	4
I/O port clamp current II/OK	VI/O < 0	max -50 mA	4
ON-state switch current II/O	±120 mA	max 120 mA	4
Continuous current through VCC or GND	±100 mA	max 100 mA	4
Storage temperature range Tstg		min -65 · max 150 °C	4
Electrostatic discharge V(ESD)	Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; all pins except I/O to GND; ±7000 V	max 7000 V	4
Electrostatic discharge V(ESD)	Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; I/O to GND; ±12000 V	max 12000 V	4
Electrostatic discharge V(ESD)	Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002; all pins; ±1000 V	max 1000 V	4
Supply voltage VCC		min 2.3 · max 3.6 V	4
Low-level control input voltage VS, V OE	VCC = 2.3V to 2.7V; max = 0.25 × VCC	min 0 V	4
Low-level control input voltage VS, V OE	VCC = 2.7V to 3.6V; max = 0.25 × VCC	min 0 V	4
Data input/output voltage VI/O		min 0 · max 5.5 V	4
Operating free-air temperature TA		min -40 · max 85 °C	4
Junction-to-ambient thermal resistance RθJA	RSE (UQFN), 10 PINS	typ 204.8 °C/W	5
Junction-to-case (top) thermal resistance RθJC(top)	RSE (UQFN), 10 PINS	typ 118.1 °C/W	5
Junction-to-board thermal resistance RθJB	RSE (UQFN), 10 PINS	typ 121.5 °C/W	5
Junction-to-top characterization parameter ψJT	RSE (UQFN), 10 PINS	typ 13.9 °C/W	5
Junction-to-board characterization parameter ψJB	RSE (UQFN), 10 PINS	typ 121.2 °C/W	5
Input-Source Clamp Voltage VIK	VCC = 3.6V, 2.7V, II = –18 mA	min -1.8 V	5
Input leakage current, control inputs IIN	VCC = 3.6V, 2.7V, 0V, VIN = 0V to 3.6V; ±1 uA	max 1 uA	5
Off-state leakage current IOZ	VCC = 3.6V, 2.7V, VO = 0V to 5.25V, VI = 0V, VIN = VCC or GND, Switch OFF; ±1 uA	max 1 uA	5
Power-off leakage current I(OFF)	VCC = 0V, VI/O = 0V to 5.25V; ±2 uA	max 2 uA	5
Power-off leakage current I(OFF)	VCC = 0V, VI/O = 0V to 3.6V; ±2 uA	max 2 uA	5
Power-off leakage current I(OFF)	VCC = 0V, VI/O = 0V to 2.7V; ±1 uA	max 1 uA	5
Supply Current ICC	VCC = 3.6V, 2.7V, VIN = VCC or GND, II/O = 0V, Switch ON or OFF	max 30 uA	5
Supply Current (low power mode) ICC	VCC = 3.6V, 2.7V, VIN = VCC or GND, Switch disabled, OE in high state	max 1 uA	5
Supply-current change, control inputs ΔICC	One input at 1.8V, other inputs at VCC or GND; VCC = 3.6V	max 20 uA	5
Supply-current change, control inputs ΔICC	One input at 1.8V, other inputs at VCC or GND; VCC = 2.7V	max 0.5 uA	5
Input capacitance, control inputs Cin	VCC = 3.3V, 2.5V, VIN = VCC or 0V	typ 1.5 · max 2.5 pF	5
OFF capacitance Cio(OFF)	VCC = 3.3V, 2.5V, VI/O = VCC or 0V, Switch OFF	typ 3.5 · max 5 pF	5
ON capacitance Cio(ON)	VCC = 3.3V, 2.5V, VI/O = VCC or 0V, Switch ON	typ 6 · max 7.5 pF	5
ON-state resistance RON	VCC = 3V, 2.3V; VI = 0V, IO = 30mA	typ 3 · max 6 Ω	5
ON-state resistance RON	VCC = 3V, 2.3V; VI = 2.4V, IO = –15mA	typ 3.4 · max 6 Ω	5
ON-state resistance match between channels ΔRON	VCC = 3V, 2.3V; VI = 0V, IO = 30mA	typ 0.2 Ω	5
ON-state resistance match between channels ΔRON	VCC = 3V, 2.3V; VI = 1.7, IO = –15mA	typ 0.2 Ω	5
ON-state resistance flatness RON(flat)	VCC = 3V, 2.3V; VI = 0V, IO = 30mA	typ 1 Ω	5
ON-state resistance flatness RON(flat)	VCC = 3V, 2.3V; VI = 1.7, IO = –15mA	typ 1 Ω	5
Crosstalk XTALK	RL = 50 , f = 250MHz; TA = –40°C to 85°C, GND = 0V	typ -40 dB	6
OFF isolation OIRR	RL = 50 , f = 250MHz; TA = –40°C to 85°C, GND = 0V	typ -41 dB	6
Bandwidth (–3 dB) BW	RL = 50; TA = –40°C to 85°C, GND = 0V	typ 0.9 GHz	6
Crosstalk XTALK	RL = 50 , f = 250MHz; TA = –40°C to 85°C, GND = 0V	typ -39 dB	6
OFF isolation OIRR	RL = 50 , f = 250MHz; TA = –40°C to 85°C, GND = 0V	typ -40 dB	6
Bandwidth (3 dB) BW	RL = 50; TA = –40°C to 85°C, GND = 0V	typ 0.9 GHz	6
Propagation delay tpd	TA = –40°C to 85°C, GND = 0V; specified by design	typ 0.25 ns	6
Line enable time tON	S to D, nD; TA = –40°C to 85°C, GND = 0V	max 30 ns	6
Line enable time tON	OE to D, nD; TA = –40°C to 85°C, GND = 0V	max 17 ns	6
Line disable time tOFF	S to D, nD; TA = –40°C to 85°C, GND = 0V	max 12 ns	6
Line disable time tOFF	OE to D, nD; TA = –40°C to 85°C, GND = 0V	max 10 ns	6
Output skew between center port to any other port tSK(O)	TA = –40°C to 85°C, GND = 0V; specified by design	typ 0.1 · max 0.2 ns	6
Skew between opposite transitions of the same output (tPHL– tPLH) tSK(P)	TA = –40°C to 85°C, GND = 0V; specified by design	typ 0.1 · max 0.2 ns	6
Line enable time tON	S to D, nD; TA = –40°C to 85°C, GND = 0V	max 50 ns	6
Line enable time tON	OE to D, nD; TA = –40°C to 85°C, GND = 0V	max 32 ns	6
Line disable time tOFF	S to D, nD; TA = –40°C to 85°C, GND = 0V	max 23 ns	6
Line disable time tOFF	OE to D, nD; TA = –40°C to 85°C, GND = 0V	max 12 ns	6
Skew between opposite transitions of the same output (tPHL– tPLH) tSK(P)	TA = –40°C to 85°C, GND = 0V; specified by design	typ 0.1 · max 0.2 ns	6

Pins, by the datasheet

1 1D+: USB port 1. · p. 3
2 1D–: USB port 1. · p. 3
3 2D+: USB port 2. · p. 3
4 2D–: USB port 2. · p. 3
5 GND: Ground. · p. 3
6 OE: Bus-switch enable. · p. 3
7 D—: Common USB port. · p. 3
8 D+: Common USB port. · p. 3
9 S: Select input. · p. 3
10 VCC: Supply voltage. · p. 3

Ordering codes, by the datasheet

TS3USB221ARSER: UQFN (RSE), 10 pins · 3000, LARGE T&R; -40 to 85°C; NIPDAU lead finish · p. 20
TS3USB221ARSER.A: UQFN (RSE), 10 pins · Orderable suffix .A; 3000, LARGE T&R; -40 to 85°C; NIPDAU lead finish · p. 20
TS3USB221ARSER.B: UQFN (RSE), 10 pins · Orderable suffix .B; 3000, LARGE T&R; -40 to 85°C; NIPDAU lead finish · p. 20
TS3USB221ARSERG4: UQFN (RSE), 10 pins · Orderable suffix G4; 3000, LARGE T&R; -40 to 85°C; NIPDAU lead finish · p. 20

Parameters

-3dB Bandwidth: 900MHz
Applications: USB
Bandwidth: 900MHz
Con: 6pF
Current - Supply: 30uA
Data Rate: 480Mbps
Features: Bidirectional analog channel
Number of Channels: 2
Operating Temperature: -40℃~+85℃
Output Current per Pin(Max): 120mA
Propagation Delay (tpd): 250ps
Ron: 6Ω
Standby Current: 1uA
Switch Circuit: 2:1
Thermal Resistance(Junction to Ambient): 204.8℃/W
Thermal Resistance(Junction to Board): 121.5℃/W
Thermal Resistance(Junction to Case): 118.1℃/W
Turn-off time: 12ns
Turn-on time: 30ns
Voltage - Supply: 2.3V~3.6V
Voltage - Supply(Absolute Max): 4.6V

Order codes

TS3USB221ARSERLCSC C128396
TS3USB221ARSERG4LCSC C2150995

Pinout

The pins of the TS3USB221ARSE
Pin	Name	Type
1	1D+	Unspecified
2	1D-	Unspecified
3	2D+	Unspecified
4	2D-	Unspecified
5	VSS	Unspecified
6	OE	Unspecified
7	D-	Unspecified
8	D+	Unspecified
9	S	Unspecified
10	VCC	Unspecified

Open-source boards using it

All 10

6 layers82 × 155 mm
Cm5-carrier
SPIRIT-org/SPIRIT
Smartphone based on the Raspberry Pi CM 5.
138 parts1.4k
4 layers83.1 × 92.5 mm
Tildagon base
emfcamp/badge-2024-hardware

183 parts40
2 layers89.3 × 52.1 mm
Divergence Meter Project v2
waicool20/Divergence-Meter-Project-v2
This is the second iteration of the Divergence Meter Project and another personal learning project, this time learning how to integrate Li-Ion batteries into a project, new electrical converter topologies, Rust…
149 parts28
4 layers70 × 60 mm
USB
SPIRIT-org/USB-test

25 parts5
4 layers69 × 81 mm
SharpCONSOLE
lastlxrd/Pogopo
Open-source modular ESP32-S3 handheld console featuring custom hardware, a Sharp Memory LCD, pogopoOS, emulation, motion controls, audio, haptics, and expandable modules.
196 parts2Apache-2.0
2 layers84.2 × 49.8 mm
Esp32-skimmer detector pro
planmarks/Skimmer-Detector-PRO
ESP32 Based Wireless Skimmer Detector
67 parts1
4 layers50 × 40 mm
Llm kicad
fgihl/usb-c-one
Small one port USB-C hub, similar to YKUSH XS, but uses USB-C connectors
100 parts
2 layers70 × 65 mm
Nixie clock
jason-watkins/nixie-clock
USB-C powered nixie tube clock. Four IN-12B digits, two INS-1 colon lamps, K155ID1 BCD decoder/drivers.
103 partsCC-BY-SA-4.0

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/ti/TS3USB221ARSE" title="TS3USB221ARSE in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/ti/TS3USB221ARSE.jpg" alt="TS3USB221ARSE" width="1200" height="900">

A picture that opens the part, for a README

[![TS3USB221ARSE](https://pcbkit.io/embed/parts/ti/TS3USB221ARSE.jpg?size=s)](https://pcbkit.io/parts/ti/TS3USB221ARSE)

Questions

Is there a KiCad symbol and footprint for the TS3USB221ARSE?

Yes. The symbol is SparkFun-IC-Special-Function:TS3USB221A and the footprint Package_DFN_QFN:UQFN-10_1.6x2.1mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TS3USB221ARSE?

UQFN-10(1.5x2), with 10 pins. Its footprint is drawn on this page.

Where is the TS3USB221ARSE datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TS3USB221ARSE?

JLCPCB lists it as part C128396, with 73,779 in stock; the sellers' links on this page open their listings.

What can replace the TS3USB221ARSE?

Parts like it in the library: the TS3USB221RSE by Texas Instruments, the TS3USB221ARSER-HXY by HXY MOSFET, the TS3USB3000RSER-HXY by HXY MOSFET and the PI3USB4000DQ1ZUAEX-HXY by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TS3USB221ARSE?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.