

Charger compare
BQ25792/MP2759 LiPo Charger Evaluation Board
- Size
- 52.5 × 80 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 110
- Nets
- 103
- Pads
- 382
- Tracks, vias
- 636, 138
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Oct 2025
- Updated
- 16 Oct 2025
Overview
Charger compare is an open-source printed circuit board by WillB97, from the WillB97/lipo-chg-eval-pcb repository on GitHub. It is a 4-layer board of 52.5 × 80 mm with 110 parts on 103 nets, routed with 636 tracks and 138 vias.
It is built around the ATTINY1616-MN, ADUM1201ARZ and CH340X, with the SN74LVC1G3157DBV, CH224Q and MP2759GQ among its other parts. Its parts include 37 resistors, 30 capacitors, 14 diodes, 8 ICs and 6 connectors. It belongs with the power boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
12ATTINY1616-MN
QFN-20-EP(3x3)-40℃~+105℃ 1.8V~5.5V 10bit 16KB 18 20MHz 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH QFN-20-EP(3x3) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)ADUM1201ARZ
SOIC-8-150mil-40℃~+125℃ 0 150ns 2 2.7V~5.5V 2.7V~5.5V 2500 25Mbps 35kV/us Bidirectional signal isolation、Multi-voltage domain interface SOIC-8-150mil Digital Isolators ROHSAnalog DevicesDigital IsolatorsCH340X
MSOP-10-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial、USB to Parallel MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersSN74LVC1G3157DBV
SOT-23-6-40℃~+85℃ 1 1.65V~5.5V 17.3pF 2:1 3.8ns 300MHz 300ps 5.7ns 6Ω SOT-23-6 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersCH224Q
DFN-10-EP(2x2)-40℃~+105℃ 140W 1C 4V~30V 5V、9V、12V、15V、20V、28V PD 3.2、BC 1.2、AVS、PPS、SPR Power Receiver Controller DFN-10-EP(2x2) USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB PDMP2759GQ
QFN-19_3.0X3.0X0.4PQFN-19(3x3) New Arrivals ROHSMonolithic Power SystemsUncategorised1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesTYPE-C16PIN
SMD-25℃~+85℃ 1 10 thousand cycles 16P 3A 5V 7.35mm Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSSHOU HANUSB Connectors1SMA33A
SMA-65℃~+150℃ 2.5uA 33V 36.7V 375pF 400W 53.3V 7.5A Single-channel TVS Unidirectional SMA ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)B240A
SMA-65℃~+150℃ 1 Independent 2A 40V 500mV@2A 500uA@40V 50A SMA Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBSMD1812-350-16V
1812-40℃~+85℃ 100A 16V 2W 3.5A 35mΩ 4s 7A 8mΩ 1812 Resettable Fuses ROHSBHFUSEResettable FusesHL2304
SOT-23-55℃~+150℃ 1 N-channel 1.5V 17pF 1W 234pF 3.6A 30V 37mΩ@10V、57mΩ@4.5V 6.08nC@10V N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
readme.mdParts
110| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C3, C10, C11, C13, C14, C15, C16, C17, C18, C19, C20, C25 |
| 8 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C1, C5, C9, C12, C27, C28, C38, C39 |
| 6 | 10k | Resistor_SMD:R_0402_1005Metric | R15, R20, R30, R31, R32, R35 |
| 4 | 0R | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R34 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R6, R9, R19, R36 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C21, C22, C23, C26 |
| 4 | Green | LED_SMD:LED_0805_2012Metric | D7, D9, D10, D13 |
| 4 | M3 | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | Yellow | LED_SMD:LED_0805_2012Metric | D1, D8, D11, D12 |
| 3 | 1.2k | Resistor_SMD:R_0402_1005Metric | R1, R25, R26 |
| 3 | 4.7k | Resistor_SMD:R_0402_1005Metric | R22, R24, R33 |
| 2 | 10k-ntc | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | TH1, TH2 |
| 2 | 16k | Resistor_SMD:R_0402_1005Metric | R21, R23 |
| 2 | 1N5819WS | Diode_SMD:D_SOD-323 | D3, D4 |
| 2 | 2.5x5.5mm | Charger:DC005-2.5 | J1, J4 |
| 2 | 47nF | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R27, R28 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2 |
| 2 | SN74LVC1G3157 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U7, U8 |
| 2 | TYPE-C16PIN | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J5, J6 |
| 1 | 0R | Resistor_SMD:R_1206_3216Metric | R37 |
| 1 | 1.0uH | Charger:TDK-SPM6530T | L1 |
| 1 | 10.5k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10uH/5A | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L2 |
| 1 | 140k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 1SMA33A | Diode_SMD:D_SMA | D5 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C24 |
| 1 | 20mR | Resistor_SMD:R_1206_3216Metric | R13 |
| 1 | 220k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 27k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 330R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R17 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 5.23k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 68k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | ADuM1201ARZ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U6 |
| 1 | ATtiny1616-M | Package_DFN_QFN:VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm | U4 |
| 1 | B240A | Diode_SMD:D_SMA | D2 |
| 1 | BQ25792 | Charger:VQFN29-HR | U1 |
| 1 | BSMD1812-350-16V | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | Batt | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J3 |
| 1 | CH224Q | Charger:DFN-10_2x2mm_P0.4mm | U2 |
| 1 | CH340X | Package_SO:MSOP-10_3x3mm_P0.5mm | U5 |
| 1 | HL2304 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | MMSZ5246B | Diode_SMD:D_SOD-123 | D14 |
| 1 | MP2759 | Charger:QFN-19_MP2759_MNP | U3 |
| 1 | MS-22C01-G010 | Charger:SW_DPDT_MS-22C01-G010 | SW1 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D6 |
| 1 | TS-1088-AR02016 | Charger:SW_Push_SPST_JLC_Basic | SW2 |
| 1 | TagConnect 2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J7 |
| 1 | WBB | Charger:WBB | LBL1 |
Similar boards
- 4 layers100.5 × 87.7 mm

- 4 layers46 × 100 mm

- 2 layers100 × 90 mm

Powerbank devboard
math-milan/PowerbankTestCode
This is a firmware for a Powerbank testboard where i want to evealuate multiple ti chips like the tps25751
185 parts2MIT - 2 layers99.8 × 49.8 mm

LedArrayDemo
radex/radmatrix
Tiny modular LED matrix. NOTE: Moved to https://code.hackerspace.pl/radex/radmatrix
453 parts2 - 2 layers148 × 30 mm

Ui board 1u
betz-engineering/ui_board_1u
User interface PCB for 1U chassis front-panels
85 parts1CERN-OHL-P-2.0 - 2 layers144.7 × 98.2 mm

- 4 layers100 × 82 mm

- 2 layers131.8 × 51.8 mm

Bridge
nichtrami/led_tube
A LED Tube that works wireless and runs on a ESP32 with Arduino Framework
17 parts1Apache-2.0
Questions
How big is the Charger compare PCB?
It measures 52.5 × 80 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Charger compare use?
110 parts, built around the ATTINY1616-MN, ADUM1201ARZ, CH340X and SN74LVC1G3157DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Charger compare KiCad files?
From the WillB97/lipo-chg-eval-pcb repository on GitHub, at the commit this page was made from: the board is charger-compare.kicad_pcb and its schematic BQ25792.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Charger compare design in my own project?
Its repository states no licence, so its author keeps all rights: ask WillB97 before reusing the design.
