
Boards using the AD8421ARZ
21 boardsBoards in 19 GitHub repositories, designed in KiCad, that use the AD8421ARZ by Analog Devices (-18V~-2.5V、2.5V~18V -40℃~+85℃ 0.02% 1 10MHz 1V/V~10000V/V 1nA 1pA/℃ 2.3mA 2nA 3.2nV/√Hz@1kHz 35V/us 400nV/℃ 5V~36V 60uV 65mA 700ns 86dB 90dB External resistor gain、Overvoltage protection、Integrated ADC driver SOIC-8 Instrumentation Amplifiers ROHS). See how each wires it, with its parts, size, README and files; the AD8421ARZ’s symbol, footprint and pinout are on its own page.
- 2 layers100 × 100 mm

- 2 layers86 × 71 mm

Current voltage input
RWTH-ACS/current-voltage-input
Input Stage for three phase voltage and current in the low voltage grid
153 parts2CERN-OHL-W-2.0 - 6 layers100.7 × 106.4 mm

Signal processing unit
scalinq-lab/cryomagsens
The sensor unit was designed in KiCad 10 and manufactured by JLCPCB. It is built in a flex PCB material to achieve a very small build height, in order to come very close to the device under test.
178 parts2CERN-OHL-P-2.0 - 6 layers62 × 77 mm

Black Body Temperature Sensor PCB
DylanLockyer/Black_Body
Electrical system for black body MKID tester
217 parts1MIT - 4 layers147.2 × 96.3 mm

ShieldPCB
AErbsloeh/stimulation_genv3
Hardware Design Files for Experimental Stimulation Platform (Gen 3)
142 partsMIT - 4 layers108.5 × 107.7 mm

Pid
bec5-group/pid-controller
Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…
428 parts - 4 layers220 × 160 mm

Qds cv
cnpem-emi/qds-cv-hw
Quench detection system for a single superconducting coil working in the Vertical Cryostat.
403 parts - 4 layers220 × 200 mm

Quadrant
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
347 parts - 4 layers120 × 120 mm

- 2 layers120 × 100 mm

- 2 layers100 × 100 mm

- 2 layers99.7 × 35.6 mm

DiffAmp
krebsd/current-diffamp
Differential Amplifier circuit for use in current sensing applications. The circuit is designed to be used in conjunction with an oscilloscope.
274 partsCC-BY-SA-4.0 - 2 layers100 × 100 mm

- 2 layers94.4 × 37.1 mm

- 2 layers

- 6 layers87.8 × 48.3 mm

Bath clamp
lucask07/covg_clamp
kicad schematic and layout for COVG bath and guard clamps
183 partsGPL-3.0 - 2 layers64.5 × 92 mm

Front
JQIamo/20A-bipolar-current-source
20A bipolar current source with water cooled sensing resistor
40 parts2 - 2 layers17.3 × 30.8 mm

- 4 layers50 × 20 mm

RobustEEG AFE
ppolGTMonster/RobustEEG_forUHFMRI
Hardware for an Open Source EEG usable in high magnetic Fields
58 parts1 - 2 layers100 × 62 mm

Analog board
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
138 parts - 4 layers120 × 108 mm

Quadrant-2x2
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
129 parts