2 layers94.4 × 37.1 mm
2 layers100 × 100 mm
PCB FINAL 1
LorDPaxO/PCB_FINAL_1PCB listas
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 220
- Nets
- 128
- Pads
- 662
- Tracks, vias
- 1,744, 191
- Pours
- 29
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 22 May 2017
- Updated
- 24 May 2017
Overview
PCB FINAL 1 is an open-source printed circuit board by LorDPaxO, from the LorDPaxO/PCB_FINAL_1 repository on GitHub. It is a 2-layer board of 100 × 100 mm with 220 parts on 128 nets, routed with 1,744 tracks and 191 vias.
It is built around the ATMEGA328P-AU, PIC16F688-E/P and AD8421ARZ, with the AD8651AR, ADP3334AR and AD9833BRM among its other parts. Its parts include 66 capacitors, 49 resistors, 40 connectors, 18 ICs and 7 diodes. It belongs with the AVR (ATmega, ATtiny) and PIC boards of this library.
Main components
8
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
PIC16F688-E/P
PDIP-14-40℃~+125℃ 10bit 12 20MHz 256Byte 256Byte 2V~5.5V 7KB 8 Bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AD8421ARZ
SOIC-8-18V~-2.5V、2.5V~18V -40℃~+85℃ 0.02% 1 10MHz 1V/V~10000V/V 1nA 1pA/℃ 2.3mA 2nA 3.2nV/√Hz@1kHz 35V/us 400nV/℃ 5V~36V 60uV 65mA 700ns 86dB 90dB External resistor gain、Overvoltage protection、Integrated ADC driver SOIC-8 Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation OpAmpsAD8651AR
SOIC-8-40℃~+125℃ 1 100uV 1pA 1pA 2.7V~5.5V 4.5nV/√Hz@100kHz 40mA 41V/us 4uV/℃ 50MHz 95dB 9mA Rail-to-Rail Input, Rail-to-Rail Output Reverse-phase input protection SOIC-8 Precision Op Amps ROHSAnalog DevicesOperational AmplifierADP3334AR
SOIC-8-40℃~+85℃@(Ta) 1 1.5V~10V 11V 200mV@(500mA) 27uVrms 500mA 90uA Adjustable Over Current Protection、Thermal shutdown、Enable control Positive SOIC-8 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAnalog DevicesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
AD9833BRM
-- Direct Digital Synthesis (DDS)Analog DevicesDirect Digital Synthesis (DDS)AD8606ARZ
SOIC-8-40℃~+125℃ 0.5pA 1.2mA 100dB 10MHz 1pA 2 2.7V~5.5V 4.5uV/℃ 5V/us 80mA 80uV 8nV/√Hz@1kHz ESD protection、Built-in compensation、Overvoltage protection、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Precision Op Amps ROHSAnalog DevicesPrecision Op AmpsADR291ER
SOIC-8-40℃~+125℃@(Ta) 15uA 2.5V 3V~15V 5mA Fixed Series ±0.08% SOIC-8 Voltage Reference ROHSAnalog DevicesVoltage Reference
Parts
220| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C3, C10, C10, C13, C15, C16, C18, C20, C22, C24, C25, C27, C28, C32, C35, C39 +5 |
| 16 | Jumper | Pin_Headers:Pin_Header_Straight_1x02 | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 9 | 10K | Resistors_SMD:R_0805_HandSoldering | R3, R4, R4, R5, R6, R11, R13, R19, R24 |
| 9 | 1K | Resistors_SMD:R_0805_HandSoldering | R1, R3, R12, R12, R13, R14, R15, R18, R22 |
| 8 | 1uF | Capacitors_SMD:C_0805_HandSoldering | C2, C8, C10, C11, C14, C14, C30, C33 |
| 7 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C2, C4, C9, C17, C17, C29, C34 |
| 7 | TEST_1P | Measurement_Points:Measurement_Point_Round-TH_Small | W1, W1, W2, W3, W4, W5, W6 |
| 6 | 0,1uF | Capacitors_SMD:C_0805_HandSoldering | C3, C4, C5, C6, C7, C13 |
| 6 | 10M | Resistors_SMD:R_0805_HandSoldering | R1, R2, R10, R11, R12, R13 |
| 6 | CONN_01X02 | Socket_Strips:Socket_Strip_Straight_1x02_Pitch2.54mm | P2, P3, P4, P5, P6, P7 |
| 5 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C1, C7, C13, C19, C21 |
| 4 | 50K | Resistors_SMD:R_0805_HandSoldering | R1, R2, R5, R6 |
| 3 | 140K | Resistors_SMD:R_0805_HandSoldering | R7, R15, R16 |
| 3 | 1M | Resistors_SMD:R_0805_HandSoldering | R6, R7, R9 |
| 3 | 20pF | Capacitors_SMD:C_0805_HandSoldering | C12, C20, C26 |
| 3 | ADP3334 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2, U5, U8 |
| 3 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2, J3, J4 |
| 3 | LED | LEDs:LED_0805 | D1, D2, D3 |
| 3 | Led_0805 | Resistors_SMD:R_0805_HandSoldering | D1, D2, D3 |
| 2 | 0.01uF | Capacitors_SMD:C_0805_HandSoldering | C11, C23 |
| 2 | 0.33uF | Capacitors_SMD:C_0805_HandSoldering | C6, C7 |
| 2 | 100K | Resistors_SMD:R_0805_HandSoldering | R2, R8 |
| 2 | 180K | Resistors_SMD:R_0805_HandSoldering | R3, R4 |
| 2 | 18pF | Capacitors_SMD:C_0805_HandSoldering | C8, C9 |
| 2 | 20K | Resistors_SMD:R_0805_HandSoldering | R8, R9 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C11, C12 |
| 2 | 78.7K | Resistors_SMD:R_0805_HandSoldering | R8, R17 |
| 2 | AD5270 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U1, U4 |
| 2 | AD8421 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2, U5 |
| 2 | AD9833 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U3, U6 |
| 2 | ADG819 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U2, U7 |
| 2 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P1, P6 |
| 2 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P4, P5 |
| 2 | CONN_01X04 | Socket_Strips:Socket_Strip_Straight_1x04 | P1, P7 |
| 2 | KC5032A | Foot_Prints_PCB_OSCILLATOR:KC5032A_Foot_Print | CLK1, CLK2 |
| 1 | 0,01uF | Capacitors_SMD:C_0805_HandSoldering | C12 |
| 1 | 000 | Resistors_SMD:R_0805_HandSoldering | R20 |
| 1 | 1.4M | Resistors_SMD:R_0805_HandSoldering | R14 |
| 1 | 1.5nF | Capacitors_SMD:C_0805_HandSoldering | C3 |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C2 |
| 1 | 1nF | Capacitors_SMD:C_1206_HandSoldering | C14 |
| 1 | 1nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 1nF_1208 | Capacitors_SMD:C_1206_HandSoldering | C9 |
| 1 | 360K | Resistors_SMD:R_0805_HandSoldering | R5 |
| 1 | 470R | Resistors_SMD:R_0805_HandSoldering | R23 |
| 1 | 47nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 78,7K | Resistors_SMD:R_0805_HandSoldering | R14 |
| 1 | AD5933 | Housings_SSOP:SSOP-16_5.3x6.2mm_Pitch0.65mm | BIO1 |
| 1 | AD8232_A | Huellas:AD8232_ECG | U1 |
| 1 | AD8606 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | AD8651 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U9 |
| 1 | ADR291 | TO_SOT_Packages_THT:TO-92_Inline_Narrow_Oval | U10 |
| 1 | ALIMENT_PIC-KIT | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP5 |
| 1 | ALIMEN_PIC | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP1 |
| 1 | AMB3_16M | Crystals:Crystal_SMD_Abracon_ABM3-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | Atmega328PA | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U3 |
| 1 | CNR | Capacitors_SMD:C_1206_HandSoldering | C31 |
| 1 | CONN_01X03 | Socket_Strips:Socket_Strip_Straight_1x03_Pitch2.54mm | P1 |
| 1 | CONN_01X03 | Huellas:Pin_Header_Straight_1x03_Pitch2.54mm | P2 |
| 1 | CONN_01X05 | Pin_Headers:Pin_Header_Angled_1x05_Pitch2.54mm | P3 |
| 1 | Crystal_8MHz | Crystals:Crystal_SMD_Abracon_ABM3-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | Jumper_Calibration | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J1 |
| 1 | KC5032A_CM | Huellas:KC5032A_CM | U4 |
| 1 | LATIDOS_ECG | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | Led_Small_Reg | LEDs:LED_0805 | D2 |
| 1 | MCLK_EXTERNAL | Socket_Strips:Socket_Strip_Straight_1x01 | P2 |
| 1 | PASO_A/D | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP4 |
| 1 | PIC16F688 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U3 |
| 1 | RCAL | Resistors_SMD:R_0805_HandSoldering | R10 |
| 1 | RESET_PIC | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP3 |
| 1 | R_GAIN | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | SPI_AD5270_1 | Socket_Strips:Socket_Strip_Straight_1x04 | P3 |
| 1 | SPI_AD5270_2 | Socket_Strips:Socket_Strip_Straight_1x04 | P4 |
| 1 | SPI_AD9833_1 | Socket_Strips:Socket_Strip_Straight_1x03 | P5 |
| 1 | SPI_AD9833_2 | Socket_Strips:Socket_Strip_Straight_1x03 | P6 |
| 1 | SW_PUSH | Huellas:KPT_1187B | SW1 |
| 1 | TEST_1 | Measurement_Points:Measurement_Point_Round-TH_Small | W2 |
| 1 | TEST_10 | Measurement_Points:Measurement_Point_Round-TH_Small | W5 |
| 1 | TEST_11 | Measurement_Points:Measurement_Point_Round-TH_Small | W7 |
| 1 | TEST_12 | Measurement_Points:Measurement_Point_Round-TH_Small | W9 |
The 202 most common of 220 parts.
Similar boards
- 2 layers100 × 100 mm
- 2 layers
- 2 layers61.1 × 35.4 mm
- 4 layers99 × 99 mm
TOFE VGA
timvideos/HDMI2USB-TOFE-VGA
A VGA capture board for use with TOFE-8x compatible boards like the Numato Opsis.
141 parts9 - 2 layers100 × 100 mm
BIO Respaldo
AndreSuarez/Bio_MicroMain_PCB-1
Diseño Final para la placa del Bioimpedanciometro
69 parts - 2 layers25.4 × 21.8 mm
SomfySituo5IoAdapter
Yadoms/yadoms
Yadoms is open source, simple, powerfull, flexible and multiplatforms domotic solution.
30 parts62 - 2 layers131.8 × 99.9 mm
Questions
How big is the PCB FINAL 1 PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PCB FINAL 1 use?
220 parts, built around the ATMEGA328P-AU, PIC16F688-E/P, AD8421ARZ and AD8651AR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PCB FINAL 1 KiCad files?
From the LorDPaxO/PCB_FINAL_1 repository on GitHub, at the commit this page was made from: the board is PCB_FINAL_1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the PCB FINAL 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask LorDPaxO before reusing the design.