

4 Wave Generator
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 134
- Nets
- 99
- Pads
- 413
- Tracks, vias
- 1,474, 392
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 28 Sep 2017
- Updated
- 5 Oct 2017
Overview
4 Wave Generator is an open-source printed circuit board by juank0814, from the juank0814/J_SIERRA_NEW_PCB repository on GitHub. It is a 2-layer board of 100 × 100 mm with 134 parts on 99 nets, routed with 1,474 tracks and 392 vias.
It is built around the PIC16F688-E/P, AD8421ARZ and AD9833BRM. Its parts include 34 connectors, 33 capacitors, 25 resistors, 4 ICs and 4 diodes. It belongs with the AVR (ATmega, ATtiny) and PIC boards of this library.
Main components
3PIC16F688-E/P
PDIP-14-40℃~+125℃ 10bit 12 20MHz 256Byte 256Byte 2V~5.5V 7KB 8 Bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)AD8421ARZ
SOIC-8-18V~-2.5V、2.5V~18V -40℃~+85℃ 0.02% 1 10MHz 1V/V~10000V/V 1nA 1pA/℃ 2.3mA 2nA 3.2nV/√Hz@1kHz 35V/us 400nV/℃ 5V~36V 60uV 65mA 700ns 86dB 90dB External resistor gain、Overvoltage protection、Integrated ADC driver SOIC-8 Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation OpAmpsAD9833BRM
-- Direct Digital Synthesis (DDS)Analog DevicesDirect Digital Synthesis (DDS)
Parts
134| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C8, C9, C10, C20, C24, C26, C27, C28, C31, C35 |
| 12 | TEST_1P | Measurement_Points:Measurement_Point_Round-TH_Small | -12, BASE_WAVE, ECG, GND, MODULATED, MODULATED, VDD, W2, W3, W4, W5, W10 |
| 10 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J5, J6, J7, J8, J10, J11, J12, J13, J14, J15 |
| 6 | 10K | Resistors_SMD:R_0805_HandSoldering | R16, R18, R19, R21, R25, R26 |
| 6 | 10M | Resistors_SMD:R_0805_HandSoldering | R1, R4, R8, R10, R12, R14 |
| 5 | 0.1uF | Resistors_SMD:R_0805_HandSoldering | C14, C16, C17, C23, C34 |
| 4 | 1K | Resistors_SMD:R_0805_HandSoldering | R2, R22, R23, R24 |
| 4 | TORNILLO | Mounting_Holes:MountingHole_3.2mm_M3_Pad_Via | P31, P32, P33, P34 |
| 3 | 1M | Resistors_SMD:R_0805_HandSoldering | R9, R11, R15 |
| 3 | ADG819 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | ADG818, ADG818, ADG818 |
| 3 | Led_0805 | Resistors_SMD:R_0805_HandSoldering | D1, D5, D7 |
| 2 | 0.33uF | Capacitors_SMD:C_0805_HandSoldering | C2, C3 |
| 2 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C15, C25 |
| 2 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C22, C30 |
| 2 | 180K | Resistors_SMD:R_0805_HandSoldering | R5, R6 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C18, C19 |
| 2 | 8pF | Resistors_SMD:R_0402 | C11, C12 |
| 2 | PASO_A/D | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1, JP5 |
| 1 | 0.01uF | Capacitors_SMD:C_0805_HandSoldering | C32 |
| 1 | 1.4M | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | 1.5nF | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | 100K | Resistors_SMD:R_0805_HandSoldering | R13 |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 10uF | Resistors_SMD:R_0805_HandSoldering | C36 |
| 1 | 1nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 20K | Resistors_SMD:R_0805_HandSoldering | R17 |
| 1 | 20pF | Capacitors_SMD:C_0805_HandSoldering | C33 |
| 1 | 360K | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 5V | Resistors_SMD:R_0805_HandSoldering | D3 |
| 1 | AD8232_A | Huellas:AD8232_ECG | AD8232 |
| 1 | AD8232_CONTROL | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P4 |
| 1 | AD8421 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | AD8421 |
| 1 | AD9833 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U4 |
| 1 | ATMEGA328P-AU_MIO | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U3 |
| 1 | CONN_02X03 | Foot_Prints_Manager_Outputs:SPI_9833 | SPI_9833 |
| 1 | Crystal_8MHz | Crystals:Crystal_SMD_Abracon_ABM3-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | DIG_ATMEGA | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P11 |
| 1 | DIG_ATMEGA2 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P20 |
| 1 | DIG_MICRO | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P16 |
| 1 | ECG INPUTS | Huellas:Pin_Header_Straight_1x03_Pitch2.54mm | P1 |
| 1 | I2C | Foot_Prints_Manager_Outputs:I2C_2X4 | P19 |
| 1 | INPUT_ADC_PIC | Foot_Prints_Manager_Outputs:ADC_PIC | P10 |
| 1 | J_+12V | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | J_AREF | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP4 |
| 1 | J_VDD | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP3 |
| 1 | KC5032A | Foot_Prints_PCB_OSCILLATOR:KC5032A_Foot_Print | CLK1 |
| 1 | LD1117S33TR_MIO | Foot_Prints_Manager_Outputs:SOT-223_este | U5 |
| 1 | LOGO | Logos_Fuentes:SBS_22mm | G*** |
| 1 | LOGO | Logos_Fuentes:CMOS | G*** |
| 1 | LOGO | Logos_Fuentes:Colombia | G*** |
| 1 | LOGO | Logos_Fuentes:UIS | G*** |
| 1 | MCLK_EXTERNAL | Foot_Prints_Manager_Outputs:MCLK_EXTERNAL | MCLK_EXT |
| 1 | MIN_SANGRADO | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP6 |
| 1 | MUX_S1 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P15 |
| 1 | OUTPUT_DIG_PIC | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | P13 |
| 1 | OUTPUT_TARJET | Foot_Prints_Manager_Outputs:VOUT | P14 |
| 1 | OXIMETRO | Foot_Prints_Manager_Outputs:OXIMETRO | P5 |
| 1 | PIC16F688 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U1 |
| 1 | PIC_PROGRAMER | Foot_Prints_Manager_Outputs:PIC_PROGRAMER | P2 |
| 1 | RESET | Foot_Prints_Manager_Outputs:RESET_CONNECTOR | J4 |
| 1 | RESET_PIC | Huellas:KPT_1187B | SW2 |
| 1 | RG_8421 | Foot_Prints_Manager_Outputs:RG_8421 | P12 |
| 1 | RS232 | Foot_Prints_Manager_Outputs:RS232 | P18 |
| 1 | RS232_PIC | Foot_Prints_Manager_Outputs:RS232 | P35 |
| 1 | SPI_MICRO | Foot_Prints_Manager_Outputs:SPI_CONNECTOR | P3 |
| 1 | SUPPLY_-12V | Foot_Prints_Manager_Outputs:SUPPLY_-12V | P17 |
| 1 | SUPPLY_12V | Foot_Prints_Manager_Outputs:SUPPLY_12V | P6 |
| 1 | SUPPLY_VDD | Foot_Prints_Manager_Outputs:SUPPLY_5V | P7 |
| 1 | SW_Push | Huellas:KPT_1187B | SW1 |
| 1 | XRCHA_16M | Huellas:Crystal_SMD_XRCHA_Murata_Serie_W2,5mm_L2,0mm | Y2 |
More from juank0814/J_SIERRA_NEW_PCB
2- 2 layers100 × 100 mm

- 2 layers100 × 100 mm

Similar boards
- 2 layers100 × 100 mm

- 2 layers

- 2 layers94.4 × 37.1 mm

- 2 layers25.4 × 21.8 mm

SomfySituo5IoAdapter
Yadoms/yadoms
Yadoms is open source, simple, powerfull, flexible and multiplatforms domotic solution.
30 parts62 - 2 layers131.8 × 99.9 mm

- 2 layers80 × 65 mm

- 2 layers50.8 × 22.9 mm

Waveform Generator
CedarGroveStudios/AD9833_FeatherWing
Precision Waveform Generator FeatherWing
25 parts15 - 2 layers50.8 × 22.9 mm

Waveform Gen ADSR
CedarGroveStudios/PCB_AD9833_ADSR_Featherwing
An amplitude-controlled version of the original AD9833 Waveform Generator FeatherWing.
28 parts2
Questions
How big is the 4 Wave Generator PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 4 Wave Generator use?
134 parts, built around the PIC16F688-E/P, AD8421ARZ and AD9833BRM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4 Wave Generator KiCad files?
From the juank0814/J_SIERRA_NEW_PCB repository on GitHub, at the commit this page was made from: the board is 4_Wave_Generador/4_Wave_Generator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4 Wave Generator design in my own project?
Its repository states no licence, so its author keeps all rights: ask juank0814 before reusing the design.