
AD8421ARZ
Analog DevicesExtended
-18V~-2.5V、2.5V~18V -40℃~+85℃ 0.02% 1 10MHz 1V/V~10000V/V 1nA 1pA/℃ 2.3mA 2nA 3.2nV/√Hz@1kHz 35V/us 400nV/℃ 5V~36V 60uV 65mA 700ns 86dB 90dB External resistor gain、Overvoltage protection、Integrated ADC driver SOIC-8 Instrumentation Amplifiers ROHS
- Part id
- adi/AD8421ARZ
- Category
- Instrumentation OpAmps
- Package
- SOIC-8
- Pins
- 8
- In stock
- 38 at JLCPCB (C578718)
- Used on
- 21 open-source boards
Overview
The AD8421ARZ is an instrumentation OpAmp made by Analog Devices in a SOIC-8 package with 8 pins. -18V~-2.5V、2.5V~18V -40℃~+85℃ 0.02% 1 10MHz 1V/V~10000V/V 1nA 1pA/℃ 2.3mA 2nA 3.2nV/√Hz@1kHz 35V/us 400nV/℃ 5V~36V 60uV 65mA 700ns 86dB 90dB External resistor gain、Overvoltage protection、Integrated ADC driver SOIC-8 Instrumentation Amplifiers ROHS.
PCBKit's library has its KiCad symbol (Amplifier_Instrumentation:AD8421ARZ, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 38 are in stock at JLCPCB (part C578718). 21 open-source boards in 19 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
14- Supply, least
- 2.5 V · +VS, dual supply, recommended operating min · p. 5
- Supply, most
- 18 V · +VS, dual supply, recommended operating max · p. 5
- Supply, least
- 18 V · −VS, dual supply, recommended operating min · p. 5
- Supply, most
- 2.5 V · −VS, dual supply, recommended operating max · p. 5
- Supply, least
- 5 V · +VS, single supply, recommended operating min · p. 5
- Supply, most
- 36 V · +VS, single supply, recommended operating max · p. 5
- Supply, absolute maximum
- 18 V · +VS, dual supply, absolute maximum · p. 8
- Supply, absolute maximum
- 18 V · −VS, dual supply, negative absolute limit · p. 8
- Works from
- -40 °C · operating ambient, min · p. 5
- Works up to
- 125 °C · operating ambient, max · p. 5
- Junction, hottest
- 150 °C · junction temperature, absolute maximum · p. 8
- Takes working
- 2 mA · quiescent supply current, VS = ±15 V, 25°C, typical · p. 5
- Takes at most
- 2.6 mA · quiescent supply current, −40°C to +85°C, max · p. 5
- Junction to air (8引脚 SOIC)
- 107.8 K/W · junction to ambient, four-layer JEDEC PCB · p. 8
- 2 layers100 × 100 mm

- 2 layers86 × 71 mm

Current voltage input
RWTH-ACS/current-voltage-input
Input Stage for three phase voltage and current in the low voltage grid
153 parts2CERN-OHL-W-2.0 - 6 layers100.7 × 106.4 mm

Signal processing unit
scalinq-lab/cryomagsens
The sensor unit was designed in KiCad 10 and manufactured by JLCPCB. It is built in a flex PCB material to achieve a very small build height, in order to come very close to the device under test.
178 parts2CERN-OHL-P-2.0 - 6 layers62 × 77 mm

Black Body Temperature Sensor PCB
DylanLockyer/Black_Body
Electrical system for black body MKID tester
217 parts1MIT - 4 layers147.2 × 96.3 mm

ShieldPCB
AErbsloeh/stimulation_genv3
Hardware Design Files for Experimental Stimulation Platform (Gen 3)
142 partsMIT - 4 layers108.5 × 107.7 mm

Pid
bec5-group/pid-controller
Part Number|Power|Input|Output|Packaging -----------|-----|-----|------|--------- AD8421BR|±2.5V ±18V (2mA)|(V-)+2.3V (V+)-1.8V|(V-)+1.2V (V+)-1.6V|8-MSOP / 8-SOIC LMH6505|±3.5V ±6V (2μA)|±7mA / ±0.6V|±2.4V ±3V|8-MSOP /…
428 parts - 4 layers220 × 160 mm

Qds cv
cnpem-emi/qds-cv-hw
Quench detection system for a single superconducting coil working in the Vertical Cryostat.
403 parts - 4 layers220 × 200 mm

Quadrant
etiennechlt/electronic-chess
Générée par tools/boardgen (module power). 100 x 60 mm, 2 couches, plan de masse en face arrière. Elle gère trois cellules plates 1S 5 Ah.
347 parts
Parts like it
3INA129U/2K5
SOIC-8-40℃~+85℃ 1 1.3MHz 120dB 20V/us 500nV/℃ 50uV 5nA 700uA SOIC-8 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation OpAmpsAD627BRZ
SOIC-80.01% 0.06V/us 1 5V/V~1000V/V 80kHz External resistor gain SOIC-8 Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation OpAmpsINA121U/2K5G4
SOIC-8-40℃~+85℃ 0.05% 0.7V/us 1V/V~10000V/V 200uV 4pA External resistor gain、Overvoltage Protection Single-channel SOIC-8 Instrumentation Amplifiers ROHSTexas InstrumentsInstrumentation OpAmps
Questions
Is there a KiCad symbol and footprint for the AD8421ARZ?
Yes. The symbol is Amplifier_Instrumentation:AD8421ARZ and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the AD8421ARZ?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the AD8421ARZ datasheet?
Analog Devices publishes it: the Datasheet link on this page opens it.
Where can I order the AD8421ARZ?
JLCPCB lists it as part C578718, with 38 in stock; the sellers' links on this page open their listings.
What can replace the AD8421ARZ?
Parts like it in the library: the INA129U/2K5 by Texas Instruments, the AD627BRZ by Analog Devices and the INA121U/2K5G4 by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the AD8421ARZ?
21 boards in 19 repositories on GitHub; the most starred are listed on this page, with their KiCad files.