2 layers100 × 100 mm
2 layers
4 Wave Generator
LorDPaxO/PCBS_2_LUZBINSegunda corridas de PCBS asignandas a mi nombre
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 103
- Nets
- 65
- Pads
- 298
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 30 Sep 2017
- Updated
- 5 Dec 2017
Overview
4 Wave Generator is an open-source printed circuit board by LorDPaxO, from the LorDPaxO/PCBS_2_LUZBIN repository on GitHub. It is a 2-layer board with 103 parts on 65 nets.
It is built around the PIC16F688-E/P, AD8421ARZ and AD9833BRM. Its parts include 36 capacitors, 26 resistors, 20 connectors, 7 diodes and 6 ICs. It belongs with the AVR (ATmega, ATtiny) and PIC boards of this library.
Main components
3
PIC16F688-E/P
PDIP-14-40℃~+125℃ 10bit 12 20MHz 256Byte 256Byte 2V~5.5V 7KB 8 Bit Built-in FLASH PIC PDIP-14 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
AD8421ARZ
SOIC-8-18V~-2.5V、2.5V~18V -40℃~+85℃ 0.02% 1 10MHz 1V/V~10000V/V 1nA 1pA/℃ 2.3mA 2nA 3.2nV/√Hz@1kHz 35V/us 400nV/℃ 5V~36V 60uV 65mA 700ns 86dB 90dB External resistor gain、Overvoltage protection、Integrated ADC driver SOIC-8 Instrumentation Amplifiers ROHSAnalog DevicesInstrumentation OpAmps
AD9833BRM
-- Direct Digital Synthesis (DDS)Analog DevicesDirect Digital Synthesis (DDS)
Parts
103| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 0.1uF | Capacitors_SMD:C_0805_HandSoldering | C6, C7, C8, C10, C11, C13, C20, C24, C26, C27, C28, C31, C35 |
| 9 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J7, J8, J9, J10, J11, J12, J13, J14, J15 |
| 8 | 1K | Resistors_SMD:R_0805_HandSoldering | R2, R17, R18, R19, R20, R22, R23, R24 |
| 6 | 10M | Resistors_SMD:R_0805_HandSoldering | R1, R4, R8, R10, R12, R14 |
| 5 | 0.1uF | Resistors_SMD:R_0805_HandSoldering | C14, C16, C17, C23, C34 |
| 4 | 10K | Resistors_SMD:R_0805_HandSoldering | R16, R21, R25, R26 |
| 4 | 10uF | Capacitors_SMD:C_0805_HandSoldering | C9, C12, C15, C25 |
| 3 | 1M | Resistors_SMD:R_0805_HandSoldering | R9, R11, R15 |
| 3 | Led_0805 | Resistors_SMD:R_0805_HandSoldering | D5, D6, D7 |
| 2 | 0.33uF | Capacitors_SMD:C_0805_HandSoldering | C2, C3 |
| 2 | 10uF | Capacitors_SMD:C_1206_HandSoldering | C22, C30 |
| 2 | 180K | Resistors_SMD:R_0805_HandSoldering | R5, R6 |
| 2 | 22pF | Capacitors_SMD:C_0805_HandSoldering | C18, C19 |
| 2 | 8pF | Resistors_SMD:R_0805_HandSoldering | C21, C29 |
| 2 | CONN_01X04 | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | P6, P7 |
| 1 | 0.01uF | Capacitors_SMD:C_0805_HandSoldering | C32 |
| 1 | 1.4M | Resistors_SMD:R_0805_HandSoldering | R7 |
| 1 | 1.5nF | Capacitors_SMD:C_0805_HandSoldering | C5 |
| 1 | 100K | Resistors_SMD:R_0805_HandSoldering | R13 |
| 1 | 10nF | Capacitors_SMD:C_0805_HandSoldering | C4 |
| 1 | 10uF | Resistors_SMD:R_0805_HandSoldering | C36 |
| 1 | 12V | Resistors_SMD:R_0805_HandSoldering | D2 |
| 1 | 1nF | Capacitors_SMD:C_0805_HandSoldering | C1 |
| 1 | 20pF | Capacitors_SMD:C_0805_HandSoldering | C33 |
| 1 | 360K | Resistors_SMD:R_0805_HandSoldering | R3 |
| 1 | 5V | Resistors_SMD:R_0805_HandSoldering | D3 |
| 1 | AD8232_CONTROL | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P4 |
| 1 | AD8421 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U3 |
| 1 | AD9833 | Housings_SSOP:MSOP-10_3x3mm_Pitch0.5mm | U4 |
| 1 | ADG819 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U5 |
| 1 | ATMEGA328P-AU_MIO | Housings_QFP:TQFP-32_7x7mm_Pitch0.8mm | U7 |
| 1 | Crystal | Huellas:Crystal_SMD_XRCHA_Murata_Serie_W2,5mm_L2,0mm | Y2 |
| 1 | Crystal_8MHz | Crystals:Crystal_SMD_Abracon_ABM3-2pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | I2C | Foot_Prints_Manager_Outputs:I2C_2X4 | J2 |
| 1 | J_+12V | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP2 |
| 1 | J_VDD | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP3 |
| 1 | KC5032A | Foot_Prints_PCB_OSCILLATOR:KC5032A_Foot_Print | CLK1 |
| 1 | LD1117S33TR_MIO | TO_SOT_Packages_SMD:SOT-223 | U6 |
| 1 | LED | LEDs:LED_0805 | D1 |
| 1 | MCLK_EXTERNAL | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | P8 |
| 1 | PASO_A/D | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1 |
| 1 | PIC16F688 | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | U2 |
| 1 | PIC_OUTPUTS | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P5 |
| 1 | PIC_PROGRAMER | Pin_Headers:Pin_Header_Angled_1x05_Pitch2.54mm | P2 |
| 1 | RESET | Foot_Prints_Manager_Outputs:RESET_CONNECTOR | J4 |
| 1 | RESET_PIC | Huellas:KPT_1187B | SW2 |
| 1 | RS232 | Foot_Prints_Manager_Outputs:RS232 | J1 |
| 1 | SPEAKER | Pin_Headers:Pin_Header_Angled_1x02_Pitch2.54mm | J3 |
| 1 | SPI | Foot_Prints_Manager_Outputs:SPI_CONNECTOR | P3 |
| 1 | SW_Push | Huellas:KPT_1187B | SW1 |
| 1 | VDD | Resistors_SMD:R_0805_HandSoldering | D4 |
More from LorDPaxO/PCBS_2_LUZBIN
1Similar boards
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers94.4 × 37.1 mm
- 2 layers25.4 × 21.8 mm
SomfySituo5IoAdapter
Yadoms/yadoms
Yadoms is open source, simple, powerfull, flexible and multiplatforms domotic solution.
30 parts62 - 2 layers131.8 × 99.9 mm
- 2 layers80 × 65 mm
- 2 layers50.8 × 22.9 mm
Waveform Generator
CedarGroveStudios/AD9833_FeatherWing
Precision Waveform Generator FeatherWing
25 parts15 - 2 layers50.8 × 22.9 mm
Waveform Gen ADSR
CedarGroveStudios/PCB_AD9833_ADSR_Featherwing
An amplitude-controlled version of the original AD9833 Waveform Generator FeatherWing.
28 parts2
Questions
What parts does the 4 Wave Generator use?
103 parts, built around the PIC16F688-E/P, AD8421ARZ and AD9833BRM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 4 Wave Generator KiCad files?
From the LorDPaxO/PCBS_2_LUZBIN repository on GitHub, at the commit this page was made from: the board is 4_Wave_Generator/4_Wave_Generator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 4 Wave Generator design in my own project?
Its repository states no licence, so its author keeps all rights: ask LorDPaxO before reusing the design.