Hardware

1,802 boards

KiCad boards from 760 GitHub repositories tagged “hardware”, the most starred first; open any of them in PCBKit.

2 layers127 × 125.9 mm
TARPN Power Board rev3
tarpn/tarpn-battery-backup-deluxe
Battery backup system for TARPN
94 parts
4 layers
Hush main
Terryzhao-dev/Hush
Bluetooth dictation mic in an aluminium cup that keeps people nearby from hearing you (ESP32, KiCad, CadQuery)
108 parts
2 layers100 × 46 mm
MacroPad
TGYT-Dev/macroPad
A small 5 (6 including rotary switch) button macro pad with a small screen. A project mad for stardance
13 parts
2 layers25 × 16 mm
CacPP PIC10
TheCacophonyProject/power-bank-enabler
PCB design & firmware for a device to automatically wake up USB power banks
18 parts
2 layers117.6 × 112.5 mm
Panel.bak
theQuetzalcoatl/avr-dev
A self made and designed embedded development board with several peripherals/devices to use. On top of that is an embedded kernel with several device drivers, forming an OS.
92 partsGPL-3.0
2 layers98 × 98 mm
Irl raver
tobycm/irl-raver

317 parts
2 layers60 × 40 mm
Smol audio pad
tobycm/smol-audio-pad
a smol ble audio control pad
23 partsMIT
2 layers87.2 × 97 mm
Toby hackpad
tobycm/toby-hackpad

35 parts
2 layers55 × 87 mm
SeniorProj
tomregpala/seniorProj-distortion-pedal
Two-layer PCB implementing a JFET noise-gated distortion circuit in a 1590B enclosure. KiCad.
67 parts
4 layers132.7 × 89.5 mm
Strain guage r0
ttosu25/SG-3
Hardware design for a mixed-signal strain-data acquisition system, incorporating sensor excitation, analogue signal conditioning, ADC, and MCU interface
97 parts
2 layers64.3 × 24.5 mm
Intercom
tylerreckart/arthur
A silicon assistant.
62 parts
2 layers97 × 150 mm
NegativeVoltageModule
TzarRusi/NegativeVoltageModule
Четырёхканальная плата отрицательного питания на LT3090 — KiCad, схемы, PCB, BOM, CAD-рендеры и конструктив SolidWorks.
55 parts
2 layers75.2 × 157.5 mm
TrafficLight
uniqueacevedo/KiCad-Mini-Projects
A collection of small PCB design exercises created to strengthen my understanding of KiCad, circuit design, and the hardware development workflow.
28 partsMIT
2 layers76 × 48.5 mm
Pathfinder
Vaaxs/stasis-pathfinder
Starter Project for Stasis!
5 parts
2 layers62.5 × 22.5 mm
Amp and adapter
Vaaxs/usbc-3.5mm-dac-amp-adapter
Project for Stasis, a DAC amp that is also an adapter, to go from USB-C to 3.5mm.
26 parts
2 layers49.7 × 37.6 mm
Transforemerless power supply
vaibhav-rm/kicad-portfolio
A collection of PCB designs built with KiCad. Each project lives in its own folder with schematic, PCB layout, and its own README
18 parts
4 layers63.7 × 21 mm
ESP32 custom
verma-suraj/ESP32_custom
A 3D walkthrough of the board is available in demo/3D view of the Board.mp4.
46 parts
2 layers27.9 × 15.2 mm
Barometer Pi Module
vintlabs/MS5607-Barometer-Altimeter
I2C or SPI Interface Barometric Pressure Module (Hardware)
13 partsGPL-3.0
2 layers53 × 23 mm
LDR Automatic Light Control PCB
vishalbodkhe/LDR-Automatic-Light-Control-PCB
LDR-based automatic light control system with custom KiCad PCB design, DRC verification, Gerber files and 3D visualization.
8 parts
4 layers68.6 × 53.3 mm
FPGA TB
vlntnmrx/ICECream
FPGA Dev-Board with ICE40UP5K and audio processing capabilities
111 partsApache-2.0
2 layers245 × 163 mm
EMF SENSOR PANEL
vul-os/zana
Zana — open-hardware for the physical world: robot mowers, security & cleaning bots, sensor nodes and cameras that plug into any control plane. Build them yourself. FreeCAD + KiCad.
360 partsMIT
2 layers53 × 39.5 mm
Water level
Vulcalien/water-level
Device that detects the water level within a container
20 parts
10 layers70 × 50 mm
Soilsense
wasylews/soilsense
A low-power soil moisture and climate sensor on an ESP-01, powered by a single 18650 cell for an estimated six months. Custom PCB and a 3D-printed enclosure.
29 parts
2 layers24 × 27 mm
Usb dongle stand
wb1016/usb-dongle-stand
stand that uses a USB-C connector, for mechanical connection, to use NRF Supermini, ESP32, Pi Pico W, etc as a dongle.
15 partsCC0-1.0