
Silkscreen pcb
iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

a smol ble audio control pad
Smol audio pad is an open-source printed circuit board by tobycm, from the tobycm/smol-audio-pad repository on GitHub, published under the MIT licence. It is a 2-layer board of 60 × 40 mm with 23 parts on 28 nets, routed with 95 tracks and 16 vias.
It is built around the DW01A and FS8205A. Its parts include 5 switches, 4 resistors, 2 ICs, 1 capacitor and 1 transistor. It belongs with the audio and music and radio and wireless boards and the nRF52 and nRF5x boards of this library.
a small keypad equipped with a xiao nrf52840 and a battery for portable and wireless usage, with a rotary encoder for input freedom!!



| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R2, R3, R4 |
| 3 | M2 | MountingHole:MountingHole_2.2mm_M2_Pad | H1, H2, H4 |
| 1 | 100 | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | Battery_JST | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | DW01A | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | FS8205A | Package_TO_SOT_SMD:SOT-23-6 | Q1 |
| 1 | Fn1 | toby:SW_Cherry_MX_1.00u_PCB | SW4 |
| 1 | Fn2 | toby:SW_Cherry_MX_1.00u_PCB | SW5 |
| 1 | Next | toby:SW_Cherry_MX_1.00u_PCB | SW2 |
| 1 | Previous | toby:SW_Cherry_MX_1.00u_PCB | SW3 |
| 1 | RotaryEncoder_Switch_MP | PEC12R_4220F_S0024:XDCR_PEC12R-4220F-S0024 | SW1 |
| 1 | XIAO-nRF52840-SMD | Seeed_Studio_XIAO_Series:XIAO-nRF52840-SMD | U1 |

iandchasse/silkscreen-pcb
Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.


Xii-Labs/Xii-Boy-Ultra
The world's first wire-free Wii portable, now in the palm of your hands. Better than ever, optimized to delight, built for fun. The next generation of Wii portables starts now.

RobieElliz/esp32InductanceMeterV2
Portable ESP32 Inductance Meter: A low-cost, high-precision tool with dual 100nF/5µF refs, a TLV3202 comparator, fast USB-C (IP2312) charging, and a 2.4-inch OLED display for real-time readings.


user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with

I-AM-ENGINEER/AudMX
Alternative for Deej ( https://github.com/omriharel/deej ) with more features

tor1kk/bms-buck-boost
Battery Management System (BMS) with Buck-Boost Converter
It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the DW01A and FS8205A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tobycm/smol-audio-pad repository on GitHub, at the commit this page was made from: the board is pcb/smol-audio-pad.kicad_pcb and its schematic pcb/smol-audio-pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).