Skip to the content
123456

DW01A

PUOLOPExtended

-40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHS

Part id
puolop/DW01A
Category
Battery Management
Package
SOT-23-6L
Pins
6
In stock
96,575 at JLCPCB (C351410)
Used on
338 open-source boards

Overview

The DW01A is a battery Management made by PUOLOP in a SOT-23-6L package with 6 pins. -40℃~+85℃ 1 2.5V 300mV~10V 3uA 4.3V Protection IC Support SOT-23-6L Battery Management ROHS.

PCBKit's library has its KiCad symbol (Battery_Management:DW01A, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 96,575 are in stock at JLCPCB (part C351410). 338 open-source boards in 301 repositories on GitHub use it.

Symbol

1OD2CS3OC5VCC6GND
Battery_Management:DW01AFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

5
Supply, absolute maximum
10 V · VDD, absolute maximum · p. 3
Works from
-40 °C · operating ambient temperature, min · p. 3
Works up to
85 °C · operating ambient temperature, max · p. 3
Takes working
3 µA · VCC supply current at 3.6 V, typical · p. 4
Takes at most
6 µA · VCC supply current at 3.6 V, max · p. 4

What it is and has

4
Package
SOT-23-6 · p. 1
Overcurrent protection
Two detection levels · p. 1
Delay generation
Internal circuits · p. 1
External delay capacitors
Not required · p. 1

Specifications

16
ParameterConditionsAs printedPage
Input voltage between VDD and VSS VDDVSS=0V, Ta=25°Cmin 0.3 · max 10 V3
Operating Temperature Range TOPVSS=0Vmin -40 · max 85 °C3
Storage Temperature Range TSTVSS=0Vmin -40 · max 125 °C3
Supply Current ICCTa=25°C, VCC=3.6Vtyp 3 · max 6 uA4
Power-Down Current IPDTa=25°C, VCC=1.8Vmax 4 uA4
0V Battery Charge Starting Charger Voltage V0CHATa=25°Cmin 1.2 V4
Overcharge Protection Voltage VOCTa=25°Cmin 4.25 · typ 4.3 · max 4.35 V4
Overcharge Release Voltage VOCRTa=25°Cmin 4.05 · typ 4.1 · max 4.15 V4
Overdischarge Protection Voltage VODTa=25°Cmin 2.4 · typ 2.5 · max 2.6 V4
Overdischarge Release Voltage VODRTa=25°Cmin 2.8 · typ 2.9 · max 3 V4
Overcurrent Protection Voltage VEDITa=25°Cmin 130 · typ 150 · max 170 mV4
Short Current Protection Voltage VshortTa=25°Cmin 0.82 · typ 1.36 · max 1.75 V4
Overcharge Delay Time TOCTa=25°Ctyp 110 · max 200 ms4
Overdischarge Delay Time TODTa=25°C, VCC=3.6V to 2.4Vtyp 55 · max 200 ms4
Overcurrent Delay Time (1) T EDITa=25°Ctyp 7 · max 20 ms4
Overcurrent Delay Time (2) T shortTa=25°Ctyp 400 · max 600 us4

Pins, by the datasheet

6
1 OD
MOSFET gate connection pin for discharge control. · p. 2
2 VM
Input pin for current sense and charger detect. · p. 2
3 OC
MOSFET gate connection pin for charge control. · p. 2
4 TD
Test pin for reducing delay time. · p. 2
5 VCC
Power supply through resistor R1. · p. 2
6 GND
Ground pin. · p. 2

Ordering codes, by the datasheet

1
DW01A
SOT-23-6 · Overcharge detection 4.300±0.050 V; overcharge release 4.100±0.050 V; overdischarge detection 2.50±0.1 V; overdischarge release 2.90±0.1 V; overcurrent detection 150±20 mV; 0 V battery charging available; automatic standby recovery. · p. 2

Open-source boards using it

338See all 338
  • 2 layers60 × 111.3 mmSilkscreen pcb, the printed circuit board in 3D

    Silkscreen pcb

    iandchasse/silkscreen-pcb

    Silkscreen: open-hardware ESP32-S3 e-paper reader mainboard (KiCad 9). Formerly the de-link hub.

    189 parts589CERN-OHL-S-2.0
  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 4 layers81.5 × 134.5 mmMain PCB, the printed circuit board in 3D

    Main PCB

    Xii-Labs/Xii-Boy-Ultra

    The world's first wire-free Wii portable, now in the palm of your hands. Better than ever, optimized to delight, built for fun. The next generation of Wii portables starts now.

    37 parts104CERN-OHL-S-2.0
  • 2 layers111.5 × 76.8 mmLul left, the printed circuit board in 3D

    Lul left

    weteor/LuttUnLutt

    Lütt Un Lütt is a small 3x5+2 split ortho keyboard with encoder

    54 parts70CERN-OHL-P-2.0
  • 2 layers131.5 × 184.4 mmFissure, the printed circuit board in 3D

    Fissure

    crides/fissure

    A 46/36/40 key split keyboard

    239 parts66MIT
  • 2 layers98 × 56 mmThermal pcb, the printed circuit board in 3D

    Thermal pcb

    Badbird5907/thermal-camera

    My design of a cheap and affordable thermal camera

    68 parts59MIT
  • 2 layers230 × 85 mmLe chiff ble hotswap, the printed circuit board in 3D

    Le chiff ble hotswap

    MangoIV/le_chiff_ble

    A drop-in replacement-PCB for the beautiful le_chiffre

    117 parts52GPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the DW01A?

Yes. The symbol is Battery_Management:DW01A and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DW01A?

SOT-23-6L, with 6 pins. Its footprint is drawn on this page.

Where is the DW01A datasheet?

PUOLOP publishes it: the Datasheet link on this page opens it.

Where can I order the DW01A?

JLCPCB lists it as part C351410, with 96,575 in stock; the sellers' links on this page open their listings.

What can replace the DW01A?

Parts like it in the library: the TP4057 by UMW, the DW01-A/J by Shenzhen Fuman Elec, the TP4057-42-SOT26-R by TOPPOWER and the DW01A by YONGYUTAI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DW01A?

338 boards in 301 repositories on GitHub; the most starred are listed on this page, with their KiCad files.