4 layers33 × 90 mm
Active drag system
RocketryVT/active-drag-system
Eigen Library, cmake, and arm-none-eabi-gcc tooling required for successful build.
100 parts6MIT
2 layers27.9 × 15.2 mm
Barometer Pi Module
vintlabs/MS5607-Barometer-AltimeterI2C or SPI Interface Barometric Pressure Module (Hardware)
- Size
- 27.9 × 15.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 13
- Pads
- 42
- Tracks, vias
- 127, 11
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Nov 2018
- Updated
- 11 Nov 2018
Overview
Barometer Pi Module is an open-source printed circuit board by vintlabs, from the vintlabs/MS5607-Barometer-Altimeter repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 27.9 × 15.2 mm with 13 parts on 13 nets, routed with 127 tracks and 11 vias.
It is built around the MS560702BA03-50. Its parts include 3 connectors, 2 resistors, 1 capacitor and 1 IC. It belongs with the sensors and measurement boards and the ESP32 boards of this library.
Main components
1Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP3, JP4, JP5, JP6 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J2 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP2 |
| 1 | MS560702BA03-50 | MS560702BA03-50:SON125P300X500X100-8N | U1 |
Similar boards
- 4 layers101.5 × 43.6 mm
Alcantara v.1.0
zenitheesc/Alcantara
Mobile Ground Station for stratospheric probe monitoring and rescue. Goes well with the Zenith Monitor app.
90 parts5 - 2 layers32.8 × 20.8 mm
- 6 layers84.5 × 56 mm
VLF4 PCB
McMaster-Rocketry-Team/VLF4r2
PCB schematics and layout for Void Lake Fusion 4 Avionics
156 parts3 - 4 layers31 × 100 mm
Kp ptr
PTR-projects/PTR_mega_hardware
Welcome to the KPPTR-hardware repository! This repository contains the design files for the hardware components used in the KPPTR project.
208 parts3MIT - 6 layers90 × 45 mm
Hw tele stern
shorlee/TeleSTERN
The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.
303 parts3GPL-3.0 - 4 layers42 × 65 mm
Icarus Flight Computer
daedalus-ind/icarus-hardware
Hardware of the onboard flight computer for the Icarus rocket.
106 parts2MIT - 4 layers38 × 100 mm
DAQ V4.1
IlyaasAitSimmou/krakenbane_one_pcb
This GitHub Repository contains all kiCad files related to the SRAD data aqcuisition flight computer, KRAKENBANE I which was flown at Launch Canada on the Goldeneye rocket by the Turner Fenton Rocketry Association…
82 parts1
Questions
How big is the Barometer Pi Module PCB?
It measures 27.9 × 15.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Barometer Pi Module use?
13 parts, built around the MS560702BA03-50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Barometer Pi Module KiCad files?
From the vintlabs/MS5607-Barometer-Altimeter repository on GitHub, at the commit this page was made from: the board is Barometer-Pi-Module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Barometer Pi Module design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).