Skip to the content
6 layers84.5 × 56 mmVLF4 PCB, the printed circuit board in 3D

PCB schematics and layout for Void Lake Fusion 4 Avionics

Size
84.5 × 56 mm
Copper layers
6
Thickness
1.6 mm
Parts
156
Nets
173
Pads
677
Tracks, vias
1,071, 404
Pours
713
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Dec 2023
Updated
30 Nov 2024

Overview

VLF4 PCB is an open-source printed circuit board by McMaster-Rocketry-Team, from the McMaster-Rocketry-Team/VLF4r2 repository on GitHub. It is a 6-layer board of 84.5 × 56 mm with 156 parts on 173 nets, routed with 1,071 tracks and 404 vias.

It is built around the E22-900M30S, TJA1043TK/1Y and AP62300TWU, with the CC6920SO-30A, MMC5603NJ and MS560702BA03-50 among its other parts. Its parts include 59 capacitors, 32 resistors, 19 transistors, 12 ICs and 5 diodes. It belongs with the STM32 boards of this library.

Main components

12

README

README.md

Void Lake Fusion 4 (VLF4)

SRAD Avionics from the McMaster Rocketry Team

Our Avionics Museum

Selling point

  • Pyro short circuit protection
  • Molex nano-fit connectors
  • 1W LoRa, 100km+ LoS range
  • GPS + IMU + baro sensor fusion, reducing the chance of ejecting prematurely
  • Modern 3D visualizer
  • Small
  • Open source firmware
  • Relatively cheap

Pyro

  • 3 pyro channels, each 8A continuous (current limited by the connector due to size)
  • pyro channels not connected to battery+ when not firing (unlike raven)
  • continuity detection
  • short circuit protection

Sensors

  • MCU: STM32H723
  • IMU 1: ±2000deg/s ±16g (LSM6DSMTR)
  • IMU 2: ±100g (H3LIS100DLTR)
  • Magnetometer: MMC5603NJ
  • Barometer: max altitude 30km (MS5607)
  • Storage: 64MB NOR Flash (W25Q512JVFIQ)
  • GPS: L80RE-M37
  • Radio: 1W LoRa (e22-900m30s)

Connectivity

  • 2 buzzers for stereo sound
  • usb type-c
  • battery: 2 pin molex nano-fit
  • power & arming switch: 4 pin molex nano-fit (no large current is carried over switches)
  • pyro: 6 pin molex nano-fit
  • extension: 8 pin molex nano-fit:
    • ground: 1 pin
    • power out (battery voltage) (only provides power out if the power switch is turned on): 1 pin
    • serial: 2 pins
    • CAN: 2 pins
    • GPIO: 2 pins
  • Serial Wire Debug: 5 pin molex pico-clasp
  • SMA antenna connector

Software (WIP, to be open sourced)

  • Async embedded rust

JLCPCB Manufacturing Specifications

  • Base Material: FR-4

  • Layers: 6

  • PCB Thickness: 1.6

  • Impedance Control: yes JLC06161H-3313

  • PCB Color: Black

  • Silkscreen: White

  • Material Type: FR-4 TG155

  • Via Covering: Epoxy Filled & Capped

  • Surface Finish: ENIG

  • Gold Thickness: 1 U"

  • Deburring/Edge rounding: No

  • Outer Copper Weight: 1 oz

  • Inner Copper Weight: 0.5 oz

  • Gold Fingers: No

  • Flying Probe Test: Fully Test

  • Castellated Holes: no

  • Remove Order Number: Specify a location

  • Min via hole size/diameter: 0.2mm/(0.3/0.35mm)

  • 4-Wire Kelvin Test: Yes

  • Paper between PCBs: No

  • Appearance Quality: IPC Class 2 Standard

  • Confirm Production file: Yes

  • Silkscreen Technology: Ink-jet/Screen Printing Silkscreen

  • X-out board: Accept

  • Package Box: With JLCPCB logo

  • Board Outline Tolerance: ±0.2mm(Regular)

image

Parts

156
QtyValueFootprintReferences
25100nCapacitor_SMD:C_0402_1005MetricC1, C2, C10, C11, C12, C13, C14, C15, C17, C18, C19, C20, C21, C22, C24, C27 +9
1322uCapacitor_SMD:C_0603_1608MetricC3, C4, C8, C9, C51, C52, C53, C54, C55, C56, C57, C58, C59
933KResistor_SMD:R_0402_1005MetricR3, R10, R12, R16, R20, R27, R29, R30, R31
81uCapacitor_SMD:C_0402_1005MetricC16, C26, C30, C46, C47, C48, C49, C50
8CJ3407Rocketry:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BRQ2, Q3, Q5, Q7, Q8, Q11, Q12, Q15
8MountingHoleRocketry:MountingHole_2.7mm_M2.5_KeepoutH1, H2, H3, H4, H5, H6, H7, H8
610KResistor_SMD:R_0402_1005MetricR4, R7, R11, R15, R19, RBOOT1
610uCapacitor_SMD:C_0603_1608MetricC5, C6, C25, C35, C38, C40
4AP25P06KRocketry:TO-252-2_L6.6-W6.1-P4.57-LS10.1-BLQ1, Q4, Q10, Q14
4MMBT5551_C2145Rocketry:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BRQ6, Q9, Q13, Q16
3100KResistor_SMD:R_0402_1005MetricR14, R18, R22
32N7002Rocketry:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BRQ18, Q19, Q20
3510RResistor_SMD:R_0402_1005MetricR13, R17, R21
3B5819W_C8598Rocketry:SOD-123_L2.7-W1.6-LS3.7-RD-1D1, D2, D3
3SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1, JP2, JP3
2100pCapacitor_SMD:C_0402_1005MetricC44, C45
210pCapacitor_SMD:C_0402_1005MetricC32, C33
22.2uLCapacitor_SMD:C_0402_1005MetricC28, C29
25.1KResistor_SMD:R_0402_1005MetricR25, R26
2AP62300TWUPackage_TO_SOT_SMD:TSOT-23-6U2, U3
2Conn_02x10_Odd_EvenRocketry:02x10_Compact_ConnectorJ1, J2
2FNR5020S3R3NTRocketry:IND-SMD_L5.0-W5.0_FNR50XXSL1, L2
119-217/BHC-ZL1M2RY/3TRocketry:LED0603-FD_BLUELED1
119-217/GHC-YR1S2/3TRocketry:LED0603-RDLED_G1
1200RResistor_SMD:R_0402_1005MetricR9
120KResistor_SMD:R_0402_1005MetricR2
127KResistor_SMD:R_0402_1005MetricR5
13.3KResistor_SMD:R_0402_1005MetricR6
13.3uhInductor_SMD:L_1206_3216MetricL3
13.9KResistor_SMD:R_0402_1005MetricR1
1330RResistor_SMD:R_0402_1005MetricR23
133RResistor_SMD:R_0402_1005MetricR32
14.7uCapacitor_SMD:C_0402_1005MetricC23
1532610571Rocketry:CONN-SMD_5P-P1.25_532610571-2SWD1
156KResistor_SMD:R_0402_1005MetricR8
175RResistor_SMD:R_0402_1005MetricR28
1BWSMA-KE-P001Rocketry:SMA-SMD_BWSMA-KE-P001RF1
1CC6920SO-30ARocketry:SOP-8_L4.9-W3.9-P1.27-LS6.0-BLU1
1Conn_01x02Molex:1054301102J_BAT1
1Conn_02x02_Top_BottomMolex:1054051104J_SW1
1Conn_02x03_Top_BottomMolex:1054051106J_PYRO1
1Conn_02x04_Top_BottomMolex:1054051108J_EXT1
1Conn_02x04_Top_BottomConnector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_SMDJ_EXT2
1E22-900M30SRocketry:WIRELM-SMD_E22-900M30SU11
1H3LIS100DLTRRocketry:TFLGA-16_L3.0-W3.0-P0.50-TLU6
1HeatsinkRocketry:heatsink_20x20x10HS1
1KT-0603RRocketry:LED0603-RDLED_R1
1L80RERocketry:GPSM-SMD_12P-L16.0-W16.0-P2.54-BLU10
1LSM6DSMTRRocketry:LGA-14_L3.0-W2.5-P0.50-TLU8
1MLT-9032Rocketry:BUZ-SMD_MLT-9032BUZZER1
1MMBZ27VCLT1G-NPackage_TO_SOT_SMD:SOT-23D5
1MMC5603NJRocketry:FLIPCHIP-4_L0.8-W0.8-R2-C2-P0.40-TLU7
1MS560702BA03-50Rocketry:SENSOR-SMD_MS560702BA03-50U5
1STM32H723VGHxPackage_BGA:TFBGA-100_8x8mm_Layout10x10_P0.8mmU9
1TJA1043TK/1YRocketry:HVSON-14_L4.5-W3.0-P0.65-BL-EPU12
1TYPEC-304J-BCP16Rocketry:USB-C-SMD_TYPEC-304J-BCP16USB1
1W25Q512JVFIQRocketry:SOIC-16_L10.3-W7.5-P1.27-LS10.4-BLU4
1X322516MLB4SIRocketry:OSC-SMD_4P-L3.2-W2.5-BLX1

Similar boards

  • 2 layers80 × 52 mmVolleyBot, the printed circuit board in 3D

    VolleyBot

    CausticLime1/VolleyBot

    110 parts
  • 4 layers100 × 100 mmEPS V1, the printed circuit board in 3D

    EPS V1

    McMaster-Rocketry-Team/EPS_V1

    150 parts
  • 2 layers59.5 × 25.3 mmIMUMaster, the printed circuit board in 3D

    IMUMaster

    Pledoge/IMU-ESPC3-Board

    58 parts
  • 2 layers233.7 × 172.2 mmOvercycler3, the printed circuit board in 3D

    Overcycler3

    gligli/overcycler

    Affordable DIY polyphonic hybrid single cycle / analog synthesizer

    335 parts45GPL-3.0
  • 4 layers90 × 124.3 mmDuck, the printed circuit board in 3D

    Duck

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    94 parts915
  • 4 layers62.5 × 83.8 mmKerberos2, the printed circuit board in 3D

    Kerberos2

    FrankBuss/kerberos

    C64/C128 MIDI flash interface

    169 parts81
  • 4 layers73.9 × 15.1 mmClinical Thermometer, the printed circuit board in 3D

    Clinical Thermometer

    OyinChaze/Clinical_Thermometer

    A PCB project for a clinical thermometer using esp32.

    44 parts
  • 2 layers62.5 × 83.8 mmKerberos2, the printed circuit board in 3D

    Kerberos2

    kitspace-test-repos/kicad6-file-collection

    157 partsMIT

Questions

How big is the VLF4 PCB PCB?

It measures 84.5 × 56 mm and has 6 copper layers, 1.6 mm thick.

What parts does the VLF4 PCB use?

156 parts, built around the E22-900M30S, TJA1043TK/1Y, AP62300TWU and CC6920SO-30A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the VLF4 PCB KiCad files?

From the McMaster-Rocketry-Team/VLF4r2 repository on GitHub, at the commit this page was made from: the board is pcb/VLF4_PCB.kicad_pcb and its schematic pcb/VLF4_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the VLF4 PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask McMaster-Rocketry-Team before reusing the design.