Skip to the content
123456

AP62300TWU

Diodes IncorporatedExtended

-40℃~+125℃ 1 155uA 3A 4.2V~18V 750kHz 763mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHS

Part id
diodes/AP62300TWU
Category
DC DC Converters
Package
TSOT-26
Pins
6
In stock
13,074 at JLCPCB (C1883519)
Used on
24 open-source boards

Overview

The AP62300TWU is a DC DC Converter made by Diodes Incorporated in a TSOT-26 package with 6 pins. -40℃~+125℃ 1 155uA 3A 4.2V~18V 750kHz 763mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:AP62300TWU, from KiCad's library) and its footprint (Package_TO_SOT_SMD:TSOT-23-6, from KiCad's library), ready for a KiCad board. 13,074 are in stock at JLCPCB (part C1883519). 24 open-source boards in 21 repositories on GitHub use it.

Symbol

1GND2SW3IN4FB5EN6BST
Regulator_Switching:AP62300TWUFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:TSOT-23-6From KiCad's library

From the datasheet

14
Supply, least
4.2 V · VIN, recommended operating min · p. 4
Supply, most
18 V · VIN, recommended operating max · p. 4
Supply, absolute maximum
20 V · VIN, DC absolute max · p. 4
Works from
-40 °C · Operating ambient temperature min · p. 4
Works up to
85 °C · Operating ambient temperature max · p. 4
Junction, hottest
160 °C · Junction temperature absolute max · p. 4
Takes working
155 µA · VIN quiescent current typical, no load, non-switching · p. 13
Takes asleep
1.5 µA · Shutdown supply current typical, VEN = 0V · p. 5
Gives
3 A · Continuous output current rating · p. 1
Current limit
3.7 A · LS valley current limit typical, source to drain · p. 5
Feedback reference
763 mV · AP62300T feedback voltage typical, CCM · p. 5
Switches at
750 kHz · Oscillator frequency typical, VIN = 12V, VOUT = 5V, CCM · p. 5
Junction to air (TSOT26 (Standard))
70 K/W · Junction to ambient thermal resistance · p. 4
Junction to case (TSOT26 (Standard))
12 K/W · Junction to case thermal resistance · p. 4

What it is and has

12
Continuous output current
3A · p. 1
Reference voltage accuracy
0.763V ± 1% at TA = +25°C · p. 1
Control
Constant on-time control · p. 13
Light-load operation
Automatic PFM · p. 13
Protection
Undervoltage lockout · p. 1
Protection
Cycle-by-cycle valley current limit · p. 1
Protection
Output undervoltage protection · p. 1
Protection
Thermal shutdown · p. 1
Compliance
Lead-free and RoHS compliant · p. 1
Material
Halogen and antimony free · p. 1
Control
Constant On-Time (COT) · p. 1
Integrated power MOSFETs
75mΩ high-side, 45mΩ low-side · p. 1

Around it

20
cap 100nF or higher
between BST and SW; Powers the high-side driver. · p. 3
cap 10 µF
between VIN and GND; C1; recommended for all output voltages in Table 1. · p. 17
cap 2 x 22 µF
between VOUT and GND; C2; recommended for all output voltages in Table 1. · p. 17
res 10 kΩ
between FB and GND; R2; recommended for all output voltages in Table 1. · p. 17
res 5.76 kΩ
between VOUT and FB; AP62300T R1 for 1.2 V output. · p. 17
res 9.76 kΩ
between VOUT and FB; AP62300T R1 for 1.5 V output. · p. 17
res 13.7 kΩ
between VOUT and FB; AP62300T R1 for 1.8 V output. · p. 17
res 22.6 kΩ
between VOUT and FB; AP62300T R1 for 2.5 V output. · p. 17
res 33.2 kΩ
between VOUT and FB; AP62300T R1 for 3.3 V output. · p. 17
res 56.2 kΩ
between VOUT and FB; AP62300T R1 for 5.0 V output. · p. 17
ind 1.5 µH
between SW and VOUT; L for 1.2 V or 1.5 V output. · p. 17
ind 2.2 µH
between SW and VOUT; L for 1.8 V or 2.5 V output. · p. 17
ind 3.3 µH
between SW and VOUT; L for 3.3 V or 5.0 V output. · p. 17
cap 10 - 100 pF
between VOUT and FB; Optional C5 for 1.8 V, 2.5 V, 3.3 V or 5.0 V output; open for 1.2 V and 1.5 V. · p. 17
cap 100 nF
between BST and SW; C6 for 1.2 V, 1.5 V or 1.8 V output. · p. 17
cap 100 - 220 nF
between BST and SW; C6 for 2.5 V output. · p. 17
cap 100 - 330 nF
between BST and SW; C6 for 3.3 V or 5.0 V output. · p. 17
cap 10µF or greater
between VIN and GND; Low ESR ceramic input capacitor; place as closely across VIN and GND as possible. RMS current rating should exceed half the maximum load current. · p. 18
cap 22µF to 68µF
between VOUT and GND; Low ESR ceramic output capacitor, sufficient for most applications; size for load transient requirements. · p. 18
cap 100nF
between BST and SW; Ceramic bootstrap capacitor; higher capacitance recommended when output voltage exceeds 2.5V. · p. 18

Specifications

36
ParameterConditionsAs printedPage
Supply Pin Voltage VINDCmin -0.3 · max 20 V4
Supply Pin Voltage VIN400msmin -0.3 · max 22 V4
Switch Pin Voltage VSWDC; upper limit VIN + 0.3 Vmin -1 V4
Switch Pin Voltage VSW20ns; upper limit VIN + 2.0 Vmin -2.5 V4
Enable/UVLO Pin Voltage VENTA = +25°Cmin -0.3 · max 8 V4
Feedback Pin Voltage VFBTA = +25°Cmin -0.3 · max 6 V4
Storage Temperature TSTmin -65 · max 150 °C4
Junction Temperature TJmax 160 °C4
Lead Temperature TLmax 260 °C4
Human Body Model HBMRating ±2000 Vmax 2000 V4
Charged Device Model CDMRating ±500 Vmax 500 V4
Junction to Ambient θJATSOT26 (Standard); FR-4 substrate, two-layer PCB, 2oz copper, minimum recommended pad layouttyp 70 °C/W4
Junction to Case θJCTSOT26 (Standard); FR-4 substrate, two-layer PCB, 2oz copper, minimum recommended pad layouttyp 12 °C/W4
Supply Voltage VINTA = +25°Cmin 4.2 · max 18 V4
Output Voltage VOUTTA = +25°Cmin 0.8 · max 7 V4
Operating Ambient Temperature TAmin -40 · max 85 °C4
Operating Junction Temperature TJmin -40 · max 125 °C4
Shutdown Supply Current ISHDNVEN = 0V; VIN = 12Vtyp 1.5 uA5
Quiescent Supply Current IQAP62300T; VFB = 0.85V; VIN = 12Vtyp 155 uA5
VIN Power-On Reset Rising Threshold PORtyp 3.9 · max 4.15 V5
VIN Undervoltage Lockout Falling Threshold UVLOtyp 3.6 V5
High-Side Power MOSFET On-Resistance (Note 8) RDS(ON)1TJ = +25°C; VIN = 12Vtyp 75 mΩ5
Low-Side Power MOSFET On-Resistance (Note 8) RDS(ON)2TJ = +25°C; VIN = 12Vtyp 45 mΩ5
LS Valley Current Limit (Note 8) IVALLEY_LIMITFrom Source to Drain; VIN = 12Vmin 3.2 · typ 3.7 · max 4.2 A5
Oscillator Frequency fSWVOUT = 5V, CCM; VIN = 12Vtyp 750 kHz5
Minimum On-Time tON_MINTJ = +25°C; VIN = 12Vtyp 90 ns5
Minimum Off-Time tOFF_MINTJ = +25°C; VIN = 12Vtyp 220 ns5
Feedback Voltage VFBAP62300T; TA = +25°C, CCM; VIN = 12Vmin 0.755 · typ 0.763 · max 0.77 V5
Feedback Voltage VFBAP62300T: CCM; TJ = -40°C to +125°C; VIN = 4.2V to 18Vmin 0.747 · typ 0.763 · max 0.778 V5
EN Logic High Threshold VEN_HVIN = 12Vtyp 1.2 · max 1.25 V5
EN Logic Low Threshold VEN_LVIN = 12Vmin 1.04 · typ 1.1 V5
EN Input Current IENVEN = 1.5V; VIN = 12Vtyp 7 uA5
EN Input Current IENVEN = 1V; VIN = 12Vmin 1 · typ 1.5 · max 2 uA5
Soft-Start Time tSSTJ = +25°C; VIN = 12Vtyp 2.5 ms5
Thermal Shutdown (Note 8) TSDVIN = 12Vtyp 160 °C5
Thermal Shutdown Hysteresis (Note 8) THysVIN = 12Vtyp 20 °C5

Pins, by the datasheet

6
1 GND
Power Ground. · p. 3
2 SW
Power switching output; connect the output LC filter from SW to the output load. · p. 3
3 VIN
Power input for the IC and converter MOSFETs; drive with 4.2V to 18V and bypass to GND with a suitably large capacitor. · p. 3
4 FB
Output voltage feedback sensing terminal; connect to the output resistive divider. · p. 3
5 EN
Drive high to enable and low to disable; leave floating for automatic startup; precision threshold enables UVLO programming. · p. 3
6 BST
High-side gate drive boost input; connect a capacitor of 100nF or higher from BST to SW. · p. 3

Open-source boards using it

24See all 24
  • 4 layers30.7 × 51.7 mmSmallSpeedController, the printed circuit board in 3D

    SmallSpeedController

    h0lad/MiniSpeedController

    MiniSpeedController is a dual DC motor controller based on a WCH CH32V003F RISC-V Microcontroller and two TI DRV8837DSGR. It consumes two encoder inputs and is controllable using an USART via simple TLV commands.

    37 parts7CERN-OHL-S-2.0
  • 6 layers84.5 × 56 mmVLF4 PCB, the printed circuit board in 3D

    VLF4 PCB

    McMaster-Rocketry-Team/VLF4r2

    PCB schematics and layout for Void Lake Fusion 4 Avionics

    156 parts3
  • 4 layers100 × 100 mmAlu, the printed circuit board in 3D

    Alu

    bcrist/vera

    Homebrew discrete logic CPU

    102 parts1MIT
  • 2 layers80 × 52 mmVolleyBot, the printed circuit board in 3D

    VolleyBot

    CausticLime1/VolleyBot

    110 parts
  • 2 layersPcbgolf, the printed circuit board in 3D

    Pcbgolf

    chilly23/PCBGolf-master-Comma.ai

    Compact PCB studies for the comma.ai PCBGolf challenge, including KiCad and EasyEDA designs, BOMs, STEP models, and routing-status reports.

    245 partsMIT
  • 4 layers99.9 × 50.7 mmFcu kicad v0.2, the printed circuit board in 3D

    Fcu kicad v0.2

    DavidTheFighter/rocketry

    193 partsMIT
  • 4 layers98.2 × 122 mmProject Roll, the printed circuit board in 3D

    Project Roll

    kevleep/Project-Roll

    Project Roll Project Roll is a spherical robot that achieves omni-directional movement using omni-wheels and a hamster ball drive mechanism.

    75 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the AP62300TWU?

Yes. The symbol is Regulator_Switching:AP62300TWU and the footprint Package_TO_SOT_SMD:TSOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the AP62300TWU?

TSOT-26, with 6 pins. Its footprint is drawn on this page.

Where is the AP62300TWU datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the AP62300TWU?

JLCPCB lists it as part C1883519, with 13,074 in stock; the sellers' links on this page open their listings.

What can replace the AP62300TWU?

Parts like it in the library: the TPS54302DDC by Texas Instruments, the MT3608B by XI'AN Aerosemi Tech, the SY8113IADC by 矽力杰silergy and the HFP6291LR-G1 by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the AP62300TWU?

24 boards in 21 repositories on GitHub; the most starred are listed on this page, with their KiCad files.