
TPS54302DDC
Texas InstrumentsExtended
-40℃~+125℃@(TJ) 1 3A 4.5V~28V 400kHz 45uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS
- Part id
- ti/TPS54302DDC
- Category
- DC DC Converters
- Package
- TSOT-23-6
- Pins
- 6
- In stock
- 60,969 at JLCPCB (C311983)
- Used on
- 5 open-source boards
Overview
The TPS54302DDC is a DC DC Converter made by Texas Instruments in a TSOT-23-6 package with 6 pins. -40℃~+125℃@(TJ) 1 3A 4.5V~28V 400kHz 45uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS.
PCBKit's library has its KiCad symbol (Regulator_Switching:TPS54302, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 60,969 are in stock at JLCPCB (part C311983). 5 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
15- Supply, least
- 4.5 V · VIN, recommended operating min · p. 4
- Supply, most
- 28 V · VIN, recommended operating max · p. 4
- Supply, absolute maximum
- 30 V · VIN, absolute max · p. 4
- Junction, hottest
- 150 °C · Junction temperature absolute max · p. 4
- Takes working
- 45 µA · VIN quiescent current typical, EN = 5V, VFB = 1V · p. 5
- Takes asleep
- 2 µA · Shutdown current typical, EN = GND · p. 5
- Gives
- 3 A · Continuous output current max · p. 8
- Current limit
- 5 A · High-side peak inductor current limit typical · p. 5
- Current limit
- 4 A · Low-side valley inductor current limit typical · p. 5
- Feedback reference
- 596 mV · Feedback voltage typical, VIN = 12V · p. 5
- Switches at
- 400 kHz · Centre switching frequency typical · p. 5
- Junction to air (DDC (SOT-23))
- 118.9 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (DDC (SOT-23))
- 58.3 K/W · Junction-to-case top thermal resistance · p. 4
- Junction to board (DDC (SOT-23))
- 35 K/W · Junction-to-board thermal resistance · p. 4
- Junction to air (DDC (SOT-23))
- 57.2 K/W · Junction-to-ambient thermal resistance on official EVM board · p. 4
What it is and has
8- Topology
- Synchronous step-down converter with two integrated n-channel MOSFETs · p. 8
- Switching frequency
- 400kHz fixed · p. 8
- Soft start
- 5ms internal · p. 8
- MOSFET on resistance
- 85mΩ high-side, 40mΩ low-side · p. 8
- Bootstrap diode
- Integrated · p. 8
- Protection
- Cycle-by-cycle overcurrent limiting on both MOSFETs · p. 12
- Spread spectrum
- ±6% frequency jitter · p. 13
- Package
- DDC, 6-pin SOT-23-THIN · p. 3
Around it
1- cap 0.1µF
- between BOOT and SW; Ceramic bootstrap capacitor; X7R or X5R dielectric recommended. · p. 12
Specifications
46| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input voltage VI | VIN | min -0.3 · max 30 V | 4 |
| Input voltage VI | EN | min -0.3 · max 7 V | 4 |
| Input voltage VI | FB | min -0.3 · max 7 V | 4 |
| Output voltage VO | BOOT-SW | min -0.3 · max 7 V | 4 |
| Output voltage VO | SW | min -0.3 · max 30 V | 4 |
| Output voltage VO | SW (20ns transient) | min -5 · max 30 V | 4 |
| Operating junction temperature TJ | min -40 · max 150 °C | 4 | |
| Storage temperature Tstg | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | min -2500 · max 2500 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101 | min -1500 · max 1500 V | 4 |
| Input voltage VI | VIN | min 4.5 · max 28 V | 4 |
| Input voltage VI | EN | min -0.1 · max 5.5 V | 4 |
| Input voltage VI | FB | min -0.1 · max 5.5 V | 4 |
| Output voltage VO | BOOT-SW | min -0.1 · max 5.5 V | 4 |
| Output voltage VO | SW | min -0.1 · max 28 V | 4 |
| Operating junction temperature TJ | min -40 · max 125 °C | 4 | |
| Junction-to-ambient thermal resistance RθJA | TPS54302, DDC (SOT-23), 6 pins | typ 118.9 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | TPS54302, DDC (SOT-23), 6 pins | typ 58.3 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | TPS54302, DDC (SOT-23), 6 pins | typ 35 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | TPS54302, DDC (SOT-23), 6 pins | typ 14 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | TPS54302, DDC (SOT-23), 6 pins | typ 34.8 °C/W | 4 |
| Junction-to-ambient thermal resistance on official EVM board RθJA_EVM | TPS54302, DDC (SOT-23), 6 pins | typ 57.2 °C/W | 4 |
| Input voltage range VIN | min 4.5 · max 28 V | 5 | |
| Non switching quiescent current IQ | EN = 5V, VFB = 1V | typ 45 uA | 5 |
| Shut down current IOFF | EN = GND | typ 2 uA | 5 |
| VIN under voltage lockout VIN(UVLO) | Rising VIN | min 3.8 · typ 4.1 · max 4.4 V | 5 |
| VIN under voltage lockout VIN(UVLO) | Falling VIN | min 3.3 · typ 3.6 · max 3.9 V | 5 |
| Hysteresis VIN(UVLO) | min 400 · typ 480 · max 560 mV | 5 | |
| Enable threshold VENrising | Rising | typ 1.23 · max 1.28 V | 5 |
| Enable threshold VENfalling | Falling | min 1.1 · typ 1.16 V | 5 |
| Input current I(EN_INPUT) | VEN = 1V | typ 0.7 uA | 5 |
| Hysteresis current I(EN_HYS) | VEN = 1.5V | typ 1.55 uA | 5 |
| Feedback Voltage VFB | VIN = 12V | min 0.581 · typ 0.596 · max 0.611 V | 5 |
| Pulse skip mode peak inductor current threshold I(SKIP) | VIN = 12V, VOUT = 5V, L = 10uH; not production tested | typ 500 mA | 5 |
| High-side FET on resistance R(HSD) | TA = 25°C, VBST – SW = 5V | typ 85 mΩ | 5 |
| Low-side FET on resistance R(LSD) | TA = 25°C, VIN = 12V | typ 40 mΩ | 5 |
| High-side current limit I(LIM_HS) | Maximum inductor peak current | min 4 · typ 5 · max 6 A | 5 |
| Low-side source current limit I(LIM_LS) | Maximum inductor valley current | min 3.1 · typ 4 · max 5.5 A | 5 |
| Centre switching frequency fSW | min 290 · typ 400 · max 510 kHz | 5 | |
| Thermal Shutdown | Rising temperature; not production tested | typ 160 °C | 5 |
| Thermal Shutdown | Hysteresis; not production tested | typ 10 °C | 5 |
| Thermal Shutdown | Hiccup time; not production tested | typ 32768 Cycles | 5 |
| Hiccup wait time tHIC_WAIT | typ 512 Cycles | 5 | |
| Hiccup time before restart tHIC_RESTART | typ 16384 Cycles | 5 | |
| Soft-start time tSS | typ 5 ms | 5 | |
| Minimum on time, measured at 90% to 90% and 1A loading tMIN_ON | Not production tested | typ 110 ns | 5 |
Pins, by the datasheet
6- 1 GND
- Low-side NFET source and controller ground; connect sensitive VFB to this ground at a single point. · p. 3
- 2 SW
- Switch node connection between high-side NFET and low-side NFET. · p. 3
- 3 VIN
- Input voltage supply and drain terminal of high-side power NFET. · p. 3
- 4 FB
- Converter feedback input; connect to output voltage through a feedback resistor divider. · p. 3
- 5 EN
- Enable pin; float to enable. · p. 3
- 6 BOOT
- Supply input for high-side NFET gate drive; connect a 0.1uF capacitor between BOOT and SW. · p. 3
Open-source boards using it
5- 4 layers72.6 × 47.5 mm

- 2 layers40.6 × 22.9 mm

- 4 layers72.6 × 89.1 mm

- 4 layers72.6 × 89.1 mm

- 4 layers76.5 × 76.9 mm

Parts like it
8MT3608B
SOT-23-6-40℃~+85℃ 1 1.2MHz 2.5V~24V 4A 70uA Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode SOT-23-6 DC-DC Converters ROHSXI'AN Aerosemi TechDC-DC ConvertersSY8113IADC
TSOT-23-6-40℃~+85℃ 1 200uA 3A 4.2V~18V 500kHz Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS矽力杰silergyDC-DC ConvertersHFP6291LR-G1
SOT-23-6L-40℃~+80℃@(TA) 1 1.2MHz 100uA 2.5V~28V 2V~24V 4A Adjustable Boost Boost Built-in No SOT-23-6L DC-DC Converters ROHSHXY MOSFETDC-DC ConvertersRT6253BHGJ6F
TSOT-23-6-40℃~+125℃ 1 280uA 3A 4.5V~17V 580kHz 765mV~7V Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSRichtek TechDC-DC ConvertersTLV61048DBV
SOT-23-6-40℃~+125℃@(TJ) 1 100uA 2.65V~5.5V 3.3V~14V 550kHz、1MHz Adjustable Boost Boost Built-in No SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS56339DDC
TSOT-23-6-40℃~+125℃@(TJ) 1 3A 4.5V~24V 500kHz 800mV~16V 98uA Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersHX3608
SOT-23-6L-40℃~+80℃@(TA) 1 1.2MHz 2.5V~28V 2V~24V 90uA Adjustable Boost Boost Built-in No SOT-23-6L DC-DC Converters ROHSHXDC-DC ConvertersSY8113BADC
TSOT-23-6-40℃~+125℃@(TJ) 1 100uA 3A 4.5V~18V 500kHz Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS矽力杰silergyDC-DC Converters
Questions
Is there a KiCad symbol and footprint for the TPS54302DDC?
Yes. The symbol is Regulator_Switching:TPS54302 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the TPS54302DDC?
TSOT-23-6, with 6 pins. Its footprint is drawn on this page.
Where is the TPS54302DDC datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the TPS54302DDC?
JLCPCB lists it as part C311983, with 60,969 in stock; the sellers' links on this page open their listings.
What can replace the TPS54302DDC?
Parts like it in the library: the MT3608B by XI'AN Aerosemi Tech, the SY8113IADC by 矽力杰silergy, the HFP6291LR-G1 by HXY MOSFET and the RT6253BHGJ6F by Richtek Tech. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the TPS54302DDC?
5 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.