4 layers72.9 × 62.2 mm
4 layers99.9 × 50.7 mm
Fcu kicad v0.2
DavidTheFighter/rocketry- Size
- 99.9 × 50.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 193
- Nets
- 179
- Pads
- 661
- Tracks, vias
- 1,650, 226
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Nov 2022
- Updated
- 17 Jan 2025
Overview
Fcu kicad v0.2 is an open-source printed circuit board by DavidTheFighter, from the DavidTheFighter/rocketry repository on GitHub, published under the MIT licence. It is a 4-layer board of 99.9 × 50.7 mm with 193 parts on 179 nets, routed with 1,650 tracks and 226 vias.
It is built around the LAN8742A-CZ, MCP1416-E/OT and AP62300TWU, with the BMM150, MS5611-01BA03 and BMI088 among its other parts. Its parts include 61 resistors, 52 capacitors, 25 connectors, 21 ICs and 14 diodes. It belongs with the STM32 boards of this library.
Main components
12
LAN8742A-CZ
QFN-24-EP(4x4)0℃~+70℃ 1.8V~3.3V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s Ethernet Transceiver RMII QFN-24-EP(4x4) Ethernet Transceivers ROHSMicrochip TechnologyEthernet Transceivers
MCP1416-E/OT
SOT-23-5-40℃~+150℃ 1 1.5A 1.5A 20ns 20ns 4.5V~18V 41ns 48ns 650uA Interleaved conduction protection Low Side MOSFET SOT-23-5 Gate Drivers ROHSMicrochip TechnologyGate Drivers
AP62300TWU
TSOT-26-40℃~+125℃ 1 155uA 3A 4.2V~18V 750kHz 763mV~7V Adjustable Buck Buck Built-in Yes TSOT-26 DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
BMM150
WLCSP-12(1.6x1.6)-40℃~+85℃ 1.62V~3.6V I2C、SPI ±1.3mT ±2.5mT WLCSP-12(1.6x1.6) 3D Magnetic Sensors ROHSBosch3D Magnetic Sensors
MS5611-01BA03
QFN-8(3x5)QFN-8(3x5) Pressure Sensors ROHSMEASPressure Sensors
BMI088
LGA-16(3x4.5)-40℃~+85℃ Accelerometer Gyroscope LGA-16(3x4.5) Accelerometers ROHSBosch SensortecAccelerometers
LD39200PUR
DFN-6(3x3)-40℃~+125℃@(Tj) 1 24uVrms 250mV@(2A) 2A 300uA 500mV~5.75V 6V 70dB@(1kHz) Adjustable PG Pin、Over Current Protection、Reverse connection protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TXB0108DQSR
SON-20(2x4)-40℃~+85℃ 1.2V~3.6V 1.65V~5.5V 100Mbps Bidirectional Decoupling、Auto Direction Detection、Power-Off Protection Tri-State SON-20(2x4) Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
GS1G
SMA(DO-214AC)1.1V@1A 1A 400V 5uA@400V Independent SMA(DO-214AC) Diodes - General Purpose ROHSChongqing Pingwei TechDiodes - General Purpose
MM3Z3V0
SOD-323-65℃~+150℃ 1 Independent 100Ω 10uA 1kΩ 2.8V~3.2V 300mW 3V SOD-323 Zener Diodes ROHSonsemiZener DiodesMBRD20100
DPAK-55℃~+150℃ 1 Independent 100A 100V 1mA@100V 20A 800mV@20A DPAK Schottky Diodes ROHSSMCSchottky Diodes
PT61017PEL
SMD,12.8x6.9mm0℃~+70℃ 10/100 Base-T 1CT:1CT 350uH Single port SMD,12.8x6.9mm Pulse Transformers(LAN) ROHSBournsPulse Transformers(LAN)
README
README.mdrocketry
Parts
193| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C10, C11, C12, C13, C14, C15, C16, C18, C21, C24, C28, C29, C30, C32, C33 +4 |
| 20 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R12, R13, R20, R21, R22, R27, R28, R31, R36, R37, R44, R48, R52, R56, R57 +4 |
| 15 | Conn_01x02_Socket | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J9, J10, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21, J22, J23, J24 |
| 11 | 20K | Resistor_SMD:R_0402_1005Metric | R1, R2, R4, R5, R14, R15, R16, R17, R34, R39, R54 |
| 8 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C6, C7, C17, C19, C20, C22, C34 |
| 5 | 2.4K | Resistor_SMD:R_0402_1005Metric | R8, R9, R29, R30, R53 |
| 5 | MCP1416 | Package_TO_SOT_SMD:SOT-23-5 | U1, U2, U6, U7, U16 |
| 5 | RQ3E100 | CustomFootprints:HSMT-8 | U3, U4, U10, U11, U18 |
| 5 | SF-2410F-T | CustomFootprints:SF-2410F-T | F1, F2, F3, F4, F5 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C27, C31, C39, C41 |
| 4 | 10pF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C35, C36, C37, C40 |
| 4 | 15K | Resistor_SMD:R_0402_1005Metric | R6, R7, R23, R24 |
| 4 | 220 | Resistor_SMD:R_0402_1005Metric | R10, R11, R25, R26 |
| 4 | 33 | Resistor_SMD:R_0402_1005Metric | R18, R19, R32, R38 |
| 4 | 49.9 | Resistor_SMD:R_0402_1005Metric | R40, R42, R45, R46 |
| 4 | GS1G | Diode_SMD:D_SMA | D1, D2, D8, D9 |
| 4 | MM3Z3V0 | Diode_SMD:D_SOD-323 | D3, D4, D11, D12 |
| 3 | 1.5K | Resistor_SMD:R_0402_1005Metric | R33, R51, R55 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C38, C43, C46 |
| 2 | 13pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C25, C26 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | 22uF | Capacitor_SMD:C_0603_1608Metric | C48, C50 |
| 2 | 25 MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | 56.2K | Resistor_SMD:R_0402_1005Metric | R43, R47 |
| 2 | 75 | Resistor_SMD:R_0402_1005Metric | R49, R50 |
| 2 | Conn_01x04_Socket | Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical | J2, J11 |
| 2 | W25X05 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U13, U14 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R41 |
| 1 | 12.1K | Resistor_SMD:R_0402_1005Metric | R35 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C47 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C44 |
| 1 | 27nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 3.3uH | CustomFootprints:CKST353220 | L2 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C53 |
| 1 | 470nF | Capacitor_SMD:C_0402_1005Metric | C42 |
| 1 | 470pF | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | AP62300TWU | Package_TO_SOT_SMD:TSOT-23-6 | U19 |
| 1 | BMI088 | CustomFootprints:BMI088 | U9 |
| 1 | BMM150 | Package_CSP:WLCSP-12_1.56x1.56mm_P0.4mm | U8 |
| 1 | Blue | Capacitor_SMD:C_0603_1608Metric | D5 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02 | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_01x02 | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | J25 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J4 |
| 1 | Conn_01x03_Pin | Connector_JST:JST_VH_B3P-VH_1x03_P3.96mm_Vertical | J5 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J8 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_01x06_Socket | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J7 |
| 1 | FerriteBead | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | FB1 |
| 1 | Green | Capacitor_SMD:C_0603_1608Metric | D7 |
| 1 | Green_LED | Capacitor_SMD:C_0603_1608Metric | D13 |
| 1 | LAN8742 | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U15 |
| 1 | LD39200 | Package_DFN_QFN:DFN-8-1EP_4x4mm_P0.8mm_EP2.3x3.24mm | U20 |
| 1 | LOGO | CustomFootprints:Logo | G*** |
| 1 | MAX-8C | RF_GPS:ublox_MAX | U17 |
| 1 | MBRD20100 | Package_TO_SOT_SMD:TO-252-2 | D14 |
| 1 | MS5611-01BA | CustomFootprints:LGA-8_3x5mm_P1.25mm_HandSolder | U12 |
| 1 | PT61017PEL | Transformer_SMD:Transformer_Ethernet_Bourns_PT61017PEL | TR1 |
| 1 | Red | Capacitor_SMD:C_0603_1608Metric | D6 |
| 1 | STM32F407VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U5 |
| 1 | SW_RST | Button_Switch_SMD:SW_SPST_PTS810 | SW1 |
| 1 | SolderJumper_3_Open | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | TXB0108DQSR | Package_SON:USON-20_2x4mm_P0.4mm | U21 |
| 1 | Yellow | Capacitor_SMD:C_0603_1608Metric | D10 |
The 187 most common of 193 parts.
More from DavidTheFighter/rocketry
3- 2 layers108 × 82.6 mm
- 4 layers80 × 50 mm
Similar boards
- 4 layers90 × 90 mm
02 connectivity
tomek-szczesny/byos_m2
Build Your Own System - a collection of stackable add-ons
110 parts - 4 layers83 × 106 mm
- 4 layers40 × 55 mm
CopterCat cm4
matveylapin/CopterCat_cm4
Полётный контроллер для стандарта FMU-v6u. Обычно на дронах для программирования устанавливают полётный контроллер, одноплатный компьютер и иногда arduino.
164 parts3Apache-2.0 - 4 layers73 × 98 mm
ALBERT FLIGHTCOMPUTER
felixznr/ALBERT
Albert I was a rhesus macaque monkey and the first mammal launched on a rocket (V-2 Rocket "Blossom No. 3") on June 18, 1948.
161 partsMIT - 4 layers40 × 65 mm
- 6 layers120.9 × 90 mm
SvayamV3 IIK
si-nalsal/pcb-mantis
A servo-based UAV flight controller built around the STM32H743IIK6 (Cortex-M7, UFBGA-201, 0.65 mm pitch). The board distributes power to a fixed-wing/multirotor airframe with 16 PWM servo outputs, redundant IMU and…
290 partsCERN-OHL-S-2.0 - 2 layers
Navboard
murexrobotics/electrical
Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.
47 parts192MIT - 4 layers77.5 × 56 mm
Questions
How big is the Fcu kicad v0.2 PCB?
It measures 99.9 × 50.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Fcu kicad v0.2 use?
193 parts, built around the LAN8742A-CZ, MCP1416-E/OT, AP62300TWU and BMM150. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fcu kicad v0.2 KiCad files?
From the DavidTheFighter/rocketry repository on GitHub, at the commit this page was made from: the board is flight-controller/fcu-kicad-v0.2/fcu-kicad-v0.2.kicad_pcb and its schematic engine-controller/ecu-kicad-v0.1/controller-kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fcu kicad v0.2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).