Skip to the content
1234567

LD39200PUR

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 24uVrms 250mV@(2A) 2A 300uA 500mV~5.75V 6V 70dB@(1kHz) Adjustable PG Pin、Over Current Protection、Reverse connection protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LD39200PUR
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
DFN-6(3x3)
Pins
7
In stock
498 at JLCPCB (C2969757)
Used on
22 open-source boards

Overview

The LD39200PUR is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a DFN-6(3x3) package with 7 pins. -40℃~+125℃@(Tj) 1 24uVrms 250mV@(2A) 2A 300uA 500mV~5.75V 6V 70dB@(1kHz) Adjustable PG Pin、Over Current Protection、Reverse connection protection、Thermal Shutdown Positive DFN-6(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LD39200PUR, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-BL-EP-1, from EasyEDA), ready for a KiCad board. 498 are in stock at JLCPCB (part C2969757). 22 open-source boards in 15 repositories on GitHub use it.

Symbol

1OUT2ADJ/sense3GND4PG5EN6IN7EP
EasyEDA_Cloud:LD39200PURFrom EasyEDA

Footprint

1234567
EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-BL-EP-1From EasyEDA

From the datasheet

14
Supply, least
1.25 V · VIN, recommended operating min · p. 6
Supply, most
6 V · VIN, recommended operating max · p. 6
Supply, absolute maximum
7 V · VIN, absolute maximum · p. 5
Junction, hottest
150 °C · Maximum junction temperature · p. 5
Takes working
100 µA · VIN, typical quiescent current at IOUT = 0 A · p. 7
Takes asleep
10 nA · VIN, typical shutdown current at Ven = 0, Vin = 6 V · p. 7
Gives
2 A · Guaranteed output current · p. 1
Current limit
3.5 A · Typical short-circuit current at VOUT = 0 V · p. 7
Feedback reference
500 mV · VADJ, typical adjustable pin voltage · p. 6
Dropout
120 mV · Typical at VIN = 1.4 V, IOUT = 1 A, -40 °C < TJ < 125 °C · p. 6
Dropout
135 mV · Typical at VIN = 2.5 V, IOUT = 2 A, -40 °C < TJ < 125 °C · p. 6
Dropout
110 mV · Typical at VIN = 5.3 V, IOUT = 2 A, -40 °C < TJ < 125 °C · p. 6
Junction to case (DFN6 (3 x 3 mm))
10 K/W · Junction-to-case thermal resistance · p. 5
Junction to air (DFN6 (3 x 3 mm))
55 K/W · Junction-to-ambient thermal resistance · p. 5

What it is and has

7
Output accuracy
1 % at 25 °C, 2 % in full temperature range · p. 1
PSRR
70 dB at 1 kHz · p. 1
Protection
Reverse current protection · p. 1
Protection
Internal current and thermal limit · p. 1
Power Good
Dedicated flag pin · p. 1
Operating junction temperature
-40 °C to 125 °C · p. 1
Package options
DFN6 (3 x 3 mm), DFN8 (4 x 4 mm) · p. 1

Around it

3
cap 10 μF
between IN and GND; Recommended CIN in the typical application. · p. 4
res R1 = R2 x (VOUT / VADJ - 1)
between OUT and ADJ; Upper resistor of the adjustable output divider. · p. 4
res R2
between ADJ and GND; Lower resistor of the adjustable output divider; select with R1 using the stated formula. · p. 4

Specifications

43
ParameterConditionsAs printedPage
Input supply voltage VINmin -0.3 · max 7 V5
Adjustable voltage VADJmin -0.3 · max 2 V5
Output voltage/output sense voltage VOUT /VSENSEmin -0.3 · max 7 V5
Enable pin voltage ENmin -0.3 · max 7 V5
Power Good pin voltage PGmin -0.3 · max 7 V5
Charge device model ESDmin -500 · max 500 V5
Human body model ESDmin -2000 · max 2000 V5
Operating junction temperature TJ-OPmin -40 · max 125 °C5
Maximum junction temperature TJ-MAXmax 150 °C5
Storage temperature TSTGmin -55 · max 150 °C5
Junction-to-case thermal resistance RTHJCDFN6 (3 x 3 mm)typ 10 °C/W5
Junction-to- ambient thermal resistance RTHJADFN6 (3 x 3 mm)typ 55 °C/W5
Operating input voltage range VINAdjustable versionmin 1.25 · max 6 V6
Adjustable pin voltage VADJAdjustable versiontyp 0.5 V6
Adjustable pin voltage accuracy VADJTJ = 25 °C; adjustable versionmin -1 · max 1 %6
Adjustable pin voltage accuracy VADJ-40 °C < TJ < 125 °C; adjustable versionmin -2 · max 2 %6
Adjustable pin current IADJ-40 °C < TJ < 125 °C; adjustable versiontyp 100 nA6
Static line regulation ∆VADJ%/∆VINVOUT + 1 V < VIN < 6.0 V; TJ = 25 °C; adjustable versiontyp 0.01 %/V6
Static line regulation ∆VADJ%/∆VINVOUT + 1 V < VIN < 6.0 V; -40 °C < TJ < 125 °C; adjustable versionmax 0.2 %/V6
Static load regulation ∆VADJ%/∆IOUT0 mA < IOUT < 2 A; TJ = 25 °C; adjustable versiontyp 0.1 %/A6
Static load regulation ∆VADJ%/∆IOUT0 mA < IOUT < 2 A; -40 °C < TJ < 125 °C; adjustable versionmax 0.4 %/A6
Dropout voltage (1) VDROPVIN = 1.4 V; IOUT = 1 A; -40 °C < TJ < 125 °C; adjustable versiontyp 120 · max 250 mV6
Dropout voltage (1) VDROPVIN = 2.5 V; IOUT = 2 A; -40 °C < TJ < 125 °C; adjustable versiontyp 135 · max 250 mV6
Dropout voltage (1) VDROPVIN = 5.3 V; IOUT = 2 A; -40 °C < TJ < 125 °C; adjustable versiontyp 110 · max 250 mV6
Output noise voltage eNVOUT = VADJ; f = 10 Hz to 100 kHz; adjustable versiontyp 45 uVRMS / VOUT6
Output noise voltage eNVIN = VOUT + 0.4 V, IOUT = 700 mA; CIN = COUT = 10 uF, R2 = 10 kΩ, R1 = (VOUT – 0.5) x 20 kΩ, Cbyp = 470 nF; adjustable versiontyp 24 uVRMS6
Supply voltage rejection SVRVOUT = 1.8 V; VIN = VOUT+0.5 V; COUT = 10 uF; IOUT = 10 mA; TJ = 25 °C; f = 1 kHz; adjustable versiontyp 70 dB6
Supply voltage rejection SVRVOUT = 1.8 V; VIN = VOUT + 0.5 V; COUT = 10 uF; IOUT = 10 mA; TJ = 25 °C; f = 100 kHz; adjustable versiontyp 50 dB6
Supply voltage rejection SVRVOUT = 1.8 V; VIN = VOUT + 0.5 V; COUT = 10 uF; IOUT = 10 mA; TJ = 25 °C; f = 500 kHz; adjustable versiontyp 50 dB6
Supply voltage rejection SVRVOUT = 1.8 V; VIN = VOUT + 0.5 V; COUT = 10 uF; IOUT = 10 mA; TJ = 25 °C; f = 1 MHz; adjustable versiontyp 40 dB6
Quiescent current IQIOUT = 0 A; adjustable versiontyp 100 uA7
Quiescent current IQIOUT = 0 A; -40 °C < TJ < 125 °C; adjustable versionmax 300 uA7
Quiescent current IQIOUT = 2 A; adjustable versiontyp 1 mA7
Quiescent current IQIOUT = 2 A; -40 °C < TJ < 125 °C; adjustable versionmax 3 mA7
Shutdown current IQVen = 0, Vin = 6 V; adjustable versiontyp 10 nA7
Short-circuit current ISCVOUT = 0 V; adjustable versiontyp 3.5 A7
Minimum output current IMINAdjustable versionmax 0 A7
Enable input logic low VEN1.25 V < VIN < 6.0 V; -40 °C < TJ < 125 °C; adjustable versionmax 0.5 V7
Enable input logic high VEN1.25 V < VIN < 6.0 V; -40 °C < TJ < 125 °C; adjustable versionmin 1.2 V7
Enable pin input current IENVEN = VIN; 1.25 < VIN < 6.0 V; adjustable versiontyp 10 nA7
Power Good output voltage low PGIsink = 6 mA open drain output; adjustable versionmax 0.4 V7
Thermal shutdown TSHDNAdjustable versiontyp 170 °C7
Hysteresis TSHDNAdjustable versiontyp 20 °C7

Pins, by the datasheet

7
1 OUT
Output voltage. · p. 3
2 ADJ/sense
Connect to an external resistor divider to set the output voltage on the adjustable version. · p. 3
3 GND
Ground. · p. 3
4 PG
Power Good output. · p. 3
5 EN
Enable pin; the device is OFF when pulled low. · p. 3
6 IN
Input voltage. · p. 3
Exposed pad GND
Exposed pad should be connected to GND. · p. 3

Ordering codes, by the datasheet

3
LD39200PUR
DFN6 (3 x 3 mm) · Adjustable output voltage · p. 24
LD39200DPUR
DFN8 (4 x 4 mm) · Adjustable output voltage · p. 24
LD39200PU33R
DFN6 (3 x 3 mm) · 3.3 V fixed output voltage · p. 24

Open-source boards using it

22See all 22
  • 4 layers122.8 × 102.7 mmSwitch test board, the printed circuit board in 3D

    Switch test board

    devguardio/hurmuz

    An rpi cm4 server board

    205 parts3
  • 4 layers65 × 56 mmSdr, the printed circuit board in 3D

    Sdr

    jorikdima/sdr-pcb

    224 parts1
  • 4 layers65.5 × 36.1 mmRoboy sno, the printed circuit board in 3D

    Roboy sno

    Roboy/roboy_sno

    Altera 10M16SAU169C8G custom fpga board with esp8266-e12

    58 parts1BSD-3-Clause
  • 2 layers26.2 × 53.1 mmSemiSemafor, the printed circuit board in 3D

    SemiSemafor

    TVavrinec/SemiSemafor

    50 parts1MIT
  • 2 layers92.5 × 100 mmRcj res b board, the printed circuit board in 3D

    Rcj res b board

    CCMNR/board

    PCB for CCMNR robot

    93 parts
  • 4 layers99.9 × 50.7 mmFcu kicad v0.2, the printed circuit board in 3D

    Fcu kicad v0.2

    DavidTheFighter/rocketry

    193 partsMIT
  • 4 layers25 × 41.5 mmPhyphox m, the printed circuit board in 3D

    Phyphox m

    Dorsel89/phyphox_m_pcb

    61 partsGPL-3.0

Questions

Is there a KiCad symbol and footprint for the LD39200PUR?

Yes. The symbol is EasyEDA_Cloud:LD39200PUR and the footprint EasyEDA_Cloud:DFN-6_L3.0-W3.0-P0.95-BL-EP-1, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LD39200PUR?

DFN-6(3x3), with 7 pins. Its footprint is drawn on this page.

Where is the LD39200PUR datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LD39200PUR?

JLCPCB lists it as part C2969757, with 498 in stock; the sellers' links on this page open their listings.

Which open-source boards use the LD39200PUR?

22 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.