Skip to the content

Hardware

1,802 boards

KiCad boards from 760 GitHub repositories tagged “hardware”, the most starred first; open any of them in PCBKit.

  • 2 layers88 × 55 mmMicSparkCal, the printed circuit board in 3D

    MicSparkCal

    werediver/spark-gen

    A spark generator for microphone calibration

    35 parts
  • 4 layers52 × 57.8 mmZED F9P, the printed circuit board in 3D

    ZED F9P

    Will946/GNSS

    u-blox ZED-F9P RTK GNSS breakout board with dual-band L1/L2 reception and centimeter-level positioning accuracy.

    65 partsMIT
  • 2 layers185 × 122 mmLed board, the printed circuit board in 3D

    Led board

    WillMatthews/405led-cagemount-board

    30mm cage mount for SMT LEDs

    84 partsMIT
  • 2 layers64 × 46.5 mmPolariser drive, the printed circuit board in 3D

    Polariser drive

    WillMatthews/esp-i2c-titan

    nodemcu breakout board and software to drive an overview titan

    17 partsUnlicense
  • 2 layers75 × 60 mmAmbient, the printed circuit board in 3D

    Ambient

    WillMatthews/led-ring

    a led ring designed to attach to 30mm optical cage systems

    29 partsMIT
  • 4 layers100 × 100 mmMulti smtpa, the printed circuit board in 3D

    Multi smtpa

    WillMatthews/multi-smtpa

    Eval board (various interesting layouts) for SMTPA socket ON Semiconductor SiPMs

    157 partsGPL-3.0
  • 4 layers100 × 65 mmMulti smtpa, the printed circuit board in 3D

    Multi smtpa

    WillMatthews/quad-sipm-fastcard

    4 SiPMs on SMTPA eval board combined together using Signal Driven Multiplexing.

    76 partsMIT
  • 4 layers46 × 69 mmAmp, the printed circuit board in 3D

    Amp

    WillMatthews/rf-amp

    high frequency RF amp based on GALI2+ monolithic amplifiers

    39 partsMIT
  • 4 layers39 × 53 mmVary resistance, the printed circuit board in 3D

    Vary resistance

    WillMatthews/sipm-smtpa-vary-anode-resist

    single SMTPA eval board mount, with the ability to vary anode resistance if you like

    18 partsMIT
  • 2 layers70 × 95.4 mmEntwurf1, the printed circuit board in 3D

    Entwurf1

    wirthda/usb-oscilloscope

    Documentation and Overview over an oscilloscope project based on a STM32-µC.

    150 parts
  • 2 layers109 × 100.3 mmFloweyBoardV1, the printed circuit board in 3D

    FloweyBoardV1

    Wojtekb30/Flowey-board

    [WIP] A device for reading and saving bioelectric signals of plants

    41 parts
  • 4 layers43 × 66 mmWookey screen, the printed circuit board in 3D

    Wookey screen

    wookey-project/hard-wookey-screen

    WooKey Secure Mass Storage Screen PCB

    21 parts
  • 4 layers100 × 85 mmCM5 Edge Carrier, the printed circuit board in 3D

    CM5 Edge Carrier

    xmyoot/rpi-cm5-edge-carrier

    Raspberry Pi CM5 edge-AI audio carrier: KiCad 10, 4-layer impedance-controlled, USB-C PD, NVMe, USB3, GbE, I2S mic link. DRC-clean, JLCPCB-ready, fully scripted.

    90 parts
  • 2 layers78 × 37 mmAkku 3V3 Versorgung, the printed circuit board in 3D

    Akku 3V3 Versorgung

    yvolodym/18650-3v3-supply

    KiCad: stabile 3,3-V-Versorgung aus 18650-Li-Ion-Akku – TP4056-Ladung, DW01A/FS8205A-Schutz, MT3608-Boost, AP2112K-LDO

    32 partsCERN-OHL-S-2.0
  • 2 layers105 × 65 mmNebula, the printed circuit board in 3D

    Nebula

    z0b1/nebulatune

    NebulaTune is a HF reciever with a direct conversion single balanced diode product detector and a Si5351 as a local VFO. The VFO, encoder and the display are all controlled by the RP2350.

    31 partsMIT
  • 2 layers80 × 49 mmNtfod, the printed circuit board in 3D

    Ntfod

    zaibatsutel/ntfod

    New Tricks For Old Dogs: a new modem for old friends.

    33 parts
  • 2 layers27.8 × 22.3 mmAudio, the printed circuit board in 3D

    Audio

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    46 parts4.3kMIT
  • 4 layers52.1 × 22.6 mmDisplay eval, the printed circuit board in 3D

    Display eval

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    12 parts4.3kMIT
  • 4 layers33.7 × 12.4 mmDisplay eval short, the printed circuit board in 3D

    Display eval short

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    4 parts4.3kMIT
  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers41.4 × 14.5 mmU2f zero, the printed circuit board in 3D

    U2f zero

    conorpp/u2f-zero

    U2F USB token optimized for physical security, affordability, and style

    16 parts2.4k
  • 4 layers80 × 49 mmGlasgow, the printed circuit board in 3D

    Glasgow

    GlasgowEmbedded/glasgow

    Scots Army Knife for electronics

    118 parts2.2k0BSD