Skip to the content
2 layers80 × 49 mmNtfod, the printed circuit board in 3D

New Tricks For Old Dogs: a new modem for old friends.

Size
80 × 49 mm
Copper layers
2
Thickness
1.6 mm
Parts
33
Nets
28
Pads
108
Tracks, vias
317, 28
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
13 Sep 2018
Updated
3 Dec 2018

Overview

Ntfod is an open-source printed circuit board by zaibatsutel, from the zaibatsutel/ntfod repository on GitHub. It is a 2-layer board of 80 × 49 mm with 33 parts on 28 nets, routed with 317 tracks and 28 vias.

It is built around the TRS3386EIPW. Its parts include 9 capacitors, 6 diodes, 6 connectors, 3 resistors and 3 ICs. It belongs with the retro computing and games boards and the ESP8266 boards of this library.

Main components

1

Parts

33
QtyValueFootprintReferences
510uFCapacitors_SMD:C_1206C1, C5, C6, C7, C9
40.1uFCapacitors_SMD:C_1206C2, C3, C4, C8
310KResistors_SMD:R_1206_HandSolderingR1, R2, R3
2GS3Connectors:GS3J5, J6
1ntfod:DP8049
15-7V DCConnectors:PINHEAD1-2J3
1AZ1117-3.3TO_SOT_Packages_SMD:SOT-223-3_TabPin2U1
1CARRIERntfod:D_1206D3
1CONN_01X04Pin_Headers:Pin_Header_Straight_1x04J1
1DB9_Female_MountingHolesntfod:DB9_Fem_MountingHolesJ2
1DSR/CTSntfod:D_1206D4
1DTR/RTSntfod:D_1206D5
1ESP-03ntfod:ESP-03U3
1Jack-DCConnectors:BARREL_JACKJ4
1LOGOntfod:LOGOG***
1LOGOntfod:NTFOD_LOGO_32mmG***
1POWERntfod:D_1206D6
1PROGRAMntfod:SW_SPST_TL3342SW1
1RECVntfod:D_1206D2
1RESETntfod:SW_SPST_TL3342SW2
1TRS3386EHousings_SOIC:SOIC-20W_7.5x12.8mm_Pitch1.27mmU2
1TXMITntfod:D_1206D1

The 32 most common of 33 parts.

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    33 parts1kGPL-3.0
  • 2 layers127 × 96 mmAmiga gfxcard, the printed circuit board in 3D

    Amiga gfxcard

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    33 parts1k
  • 2 layers92.7 × 58.4 mmHacky holidays, the printed circuit board in 3D

    Hacky holidays

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    33 parts915
  • 2 layers240 × 120 mmQuiver PDB 01, the printed circuit board in 3D

    Quiver PDB 01

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    33 parts617CERN-OHL-S-2.0
  • 2 layers75 × 26 mmDIY detector, the printed circuit board in 3D

    DIY detector

    ozel/DIY_particle_detector

    A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons

    33 parts558BSD-2-Clause
  • 2 layers100 × 50 mmPixelix, the printed circuit board in 3D

    Pixelix

    BlueAndi/Pixelix

    Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.

    33 parts447MIT
  • 2 layers65 × 30 mmCanHat, the printed circuit board in 3D

    CanHat

    bondus/KlipperToolboard

    A 3D printer tool head controller board

    33 parts373GPL-3.0

Questions

How big is the Ntfod PCB?

It measures 80 × 49 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ntfod use?

33 parts, built around the TRS3386EIPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ntfod KiCad files?

From the zaibatsutel/ntfod repository on GitHub, at the commit this page was made from: the board is ntfod.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ntfod design in my own project?

Its repository states no licence, so its author keeps all rights: ask zaibatsutel before reusing the design.