
Motherboard
slimcdk/sdb-xmas-train
Controller software for christmas train at Dagli'Brugsen Stjær

NebulaTune is a HF reciever with a direct conversion single balanced diode product detector and a Si5351 as a local VFO. The VFO, encoder and the display are all controlled by the RP2350. I will get parts soon and start documenting the build process. Website soon
Nebula is an open-source printed circuit board by z0b1, from the z0b1/nebulatune repository on GitHub, published under the MIT licence. It is a 2-layer board of 105 × 65 mm with 31 parts on 37 nets, routed with 209 tracks and 0 vias.
It is built around the TDA2003. Its parts include 8 capacitors, 2 ICs, 2 diodes, 2 connectors and 1 resistor. It belongs with the lEDs and displays boards and the RP2350 boards of this library.
NebulaTune is a HF reciever utilizng a Direct Conversion Single Balanced Diode Product Detector along with an RP2350 to display and choose frequency and recieve with an digital encoder!

- link to the SCH on KiCanvasAnalyze the schematic and PCB design and determine if these fit your needs;
Gather all of the needed parts from the BOM;
A housing is wished for but not needed especially if you plan on tweaking my design;
Print the PCB(Only the F.Cu and that is in reverse) or order it from JLCPCB(not sponsored);
Install the MicroPico extension if using VS Code or just use Thonny;
More to come later...
This direct conversion single balanced diode product detector setup is pretty common, it utilizes the Si5351 as the local VFO. That way we eliminate the need for a frequency counter, because the frequency can be set and read with the RP2350!
Now lets get to the core, this direct conversion single balanced diode product detector is similar to Polyakov's mixer which is a small and easy to setup/begginer friendly HF reciever. I took inspo for the 7MHz band design, but with some tweaking the reciever should work on the whole HF band. I choose to make a reciever becuase you don't need a license to listen, and hope to bring more people into Ham Radio. The reason I used the RP2350 is because I hope to make a waterfall and split this into I and Q signals, so I can do ADC on the RP2350 and hopefully make an HF SDR Transciever.
Now, I hope that the reader know what HF and SDR mean, but just in case if someone doesn't know, I will explain the meaning of HF and SDR to you, also some other technical terms I used in this README. HF just means High Frequency and that is the defined range of frequencies in this case (3MHz to 30MHz). There are also other ranges like VHF, UHF, EHF, SHF and so on! SDR means Software Defined Radio, that is if your microcontroller/PC analyze the input values of your ADC(Analog to Digital Converter) and visualise it and control the Radio via the Software.
I'd like to add although I'm in this hobby for 8 years already, and despite me being a hardware fanatic this is only my second RF project so please contribute and tell me if I have made any mistakes! Also I'm currentley looking for sponsors for my YSWS called Propagation!
Propagation is a Hack Club YSWS in production, the idea behind this is that many people have never heard of or tried the magics of RF, our goal is to get people to make projects relating RF, learn about RF and maybe get into the hobby. What separates us from other Radio related YSWS's is that we do not require a license, would be incredible if you have one but our main goal is to expand the use of RF in every sphere of life!
Translate the site to english, its in russian.
| Reference | Part | Qty | Price | Total | Description |
|---|---|---|---|---|---|
| AE1 | Antenna | 1 | 3.66E | 3.66E | BNC CONNECTOR |
| C1 | Capacitor | 1 | 0.3E | 0.3E | 60 |
| C2,C7,C8 | Capacitor | 3 | 0.1E | 0.3E | 10n |
| C3 | Capacitor | 1 | 0.15 | 0.15 | 470n |
| C4 | CP | 1 | 0.2 | 0.2 | 22u/10V |
| C5 | CP | 1 | X | X | 100u/16V |
| C6 | Capacitor | 1 | X | X | 100n |
| D1,D2 | Diode | 2 | X | X | 1N4148 |
| J1 | VFO | 1 | 6.5 | 6.5 | Si5351 |
| J2 | Display | 1 | 6.8 | 6.8 | OLED 128x64 I2C |
| L1 | Inductor/Choke Coupled | 1 | 0.2 | 0.2 | L1 22uH L2 100uH |
| LS1 | Speaker | 1 | 2.8 | 2.8 | 8Ohm |
| R1 | Resistor | 1 | x | x | 1 |
| RV1 | Trimmer | 1 | 0.2 | 0.2 | 1k |
| SW1 | Rotary encoder swithch | 1 | 1 | 1 | / |
| U1 | TDA2003 | 1 | 1.5 | 1.5 | Audio amp |
| U2 | XIAO RP2350 DIP | 1 | 9 | 9 | Main MCU |
Total 32.61 Euros or 37.33 USD, price might vary for shipping and availabilty reasons.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | JP1, JP1, JP2, JP2, JP3, JP3, JP3, JP4, JP4 |
| 3 | 10n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C7, C8 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | 1 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C6 |
| 1 | 100u/16V | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C5 |
| 1 | 1k | Potentiometer_THT:Potentiometer_ACP_CA6-H2,5_Horizontal | RV1 |
| 1 | 22u/10V | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C4 |
| 1 | 470n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 1 | 60 | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1 |
| 1 | 8Ω | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | LS1 |
| 1 | Antenna | Connector_Coaxial:BNC_Amphenol_031-6575_Horizontal | AE1 |
| 1 | LOGO | QRCODE footprint:github | G*** |
| 1 | OLED 128x64 I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Bourns_Horizontal_PEC09-2xxxF-Sxxxx | SW1 |
| 1 | Si5351 Module | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | TDA2003 | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1 |
| 1 | XIAO-RP2350-DIP | Seeed Studio XIAO Series Library:XIAO-RP2350-DIP | U2 |
The 29 most common of 31 parts.

slimcdk/sdb-xmas-train
Controller software for christmas train at Dagli'Brugsen Stjær

Carlos-Santos-prog/rc-car-esp32
Vehículo RC de combate con seguidor de línea basado en ESP32. Diseño electrónico completo en KiCad 10.

izne/AA20
A small low frequency amplifier for home or office use. Uses TDA2003 and regulated linear PSU for smooth, real Class B transistor experience at low volumes.





stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
It measures 105 × 65 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the TDA2003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the z0b1/nebulatune repository on GitHub, at the commit this page was made from: the board is PCB/nebula/nebula.kicad_pcb and its schematic PCB/nebula/nebula.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).