KiCad boards from 53 GitHub repositories tagged “hardware-design”, the most starred first; open any of them in PCBKit.
sini6a/stm32-pocket-console
STM32 Pocket Game/Dev Console 🕹️ is a handheld device powered by 2xAAA batteries. It features 5 programmable buttons, 2 LEDs, and an SPI TFT 2.4" display with a resolution of 320x240 pixels.
NijoP/pcbflow
PCB Flow — autonomous, AI-assisted PCB design workflow that takes a hardware project from requirements to manufacturing-ready files.
trope-oshw/anthracite
MIDI-controllable fuzz pedal: open hardware (CERN-OHL-S-2.0), firmware (GPL-3.0-or-later)
shazmeenShz/ESP32-Flight-Controller
Custom 4-layer IoT-Ready ESP32 Flight Controller PCB designed in KiCad 8 featuring USB Type-C, CH340C, MP1584 power management, MPU6050 interface, and manufacturing-ready Gerber files.
AssaadMH/shadow-4wd-motor-shield-pcb
The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.
Blaze-Pascal/EKA-PiF-MIFA
2.4 GHz MIFA trace antenna design and simulation. Modeled using Ansys HFSS with Optimetrics sweeps to optimize geometry. Implemented on a custom 2-layer KiCad PCB using a coplanar waveguide.
crsknr/hw_udsp-card
A compact DSP development board for real-time embedded audio and sensing
mrcha033/hw-codesign
Agentic hardware co-design: brief to KiCad, firmware, 3D review, and explicit fabrication blockers.
vehiclewaxberry/Space-Embodied-Robot-Complete
航天服务星具身智能机械臂机器人 | Space Service Robot with Embodied Intelligence — mechanical, electrical & harness, power & thermal, and propulsion hardware design.
AlanCarvalhoEE/hap
Home Automation Platform with custom hardware and firmware (ESP8266), a Raspberry Pi–based server, and an Android client. Features modular IoT devices, TCP/IP and MQTT messaging, and a scalable system architecture.
Auroxin/picoloader-hw
Open-hardware PicoLoader for the Nintendo GameCube: a solderless RP2040 modchip. KiCad 10 sources for the v1.1A (2 MB) and v1.2A (16 MB) boards, the 30-pin flex PCB and the 3D-printed mounting parts. GPL-2.0.
Fred98246/STM-32-PCB-Design
Custom STM32F103C8T6 development board
gerhardmalberg/bms-cmu-bq79616-hardware
Open-source 6S–16S battery monitoring hardware based on TI BQ79616-Q1. Includes KiCad designs, manufacturing files, and electrical, thermal and mechanical simulation studies.
imguxuuuu/Battery-Protection-PCB
Manufacturing-ready Li-Ion Battery Protection PCB designed using KiCad 9 with complete documentation, Gerber files, simulations, and manufacturing package.
MbFredys/PCB-designs-for-PLATZI-course
PCB design exercises completed during a structured training course, documenting schematic capture, layout, and manufacturing outputs.
nakul-biovaco/Embedsys-embedded-educational-board
Industrial-grade ESP32-WROOM-32E educational development board (4-layer ENIG PCB, BQ24075 power-path, dual regulators, ST7789 IPS display & SHT40 sensor). 0 DRC certified.
SyedIhteshamuddin/All-Arduino-Projects
Embedded systems, PCB design, and electronics projects documenting my journey toward Electrical Engineering.
11cookies11/kicad-agent-suite
KiCad Agent Suite uses a structured source model to resolve parts, compile an intermediate representation, validate it, and export KiCad projects.
ahmedkamel382/STM32-Oscilloscope
A custom Digital Storage Oscilloscope (DSO) built with an STM32F401 Black Pill and a custom PCB. Features a 1.47" SPI display, an analog front-end with hardware over-voltage protection, and real-time DSP for waveform…
Annusingh002/custom-stm32-pcb
Custom STM32 development board designed in KiCad with complete schematic, PCB layout, and Gerber files.