4 layers25.4 × 58.5 mm
Shrike lite
vicharak-in/shrike
Low cost microcontroller + FPGA board for makers , hobbyist and student for endless possibility.
60 parts537GPL-2.0
RP2350
75 boardsKiCad boards from 35 GitHub repositories tagged “rp2350”, the most starred first; open any of them in PCBKit.
- 2 layers92.8 × 71.8 mm
USBSID Pico v1.3f
LouDnl/USBSID-Pico
USBSID-Pico is a RPi Pico (RP2040/W RP2350/W) based board for interfacing one or two MOS SID chips and/or hardware SID emulators over (WEB)USB with your computer, phone, ASID supporting player or USB midi controller
116 parts125GPL-2.0 - 2 layers70 × 73.1 mm
Neopico hd
fliperama86/neopico-hd
Digital video and audio capture with HDMI output for Neo Geo MVS arcade hardware using Raspberry Pi Pico 2
37 parts90Unlicense - 2 layers45 × 80 mm
FrontBoard
Michi71/PicoVintageSynthCollection
Vintage synthesizer emulations for the RP2350
33 parts77GPL-3.0 - 2 layers54 × 64 mm
DonConIOmini
ravinrabbid/DonCon2040
RP2040 based firmware and hardware for DIY Taiko no Tatsujin Drum Controllers
96 parts66MIT - 2 layers152.4 × 68.6 mm
Pico test synth2
todbot/pico_test_synth
Simple board to help make synths with Raspberry Pi Pico/Pico2 and PCM5102 I2S DAC
55 parts57MIT - 2 layers98 × 54.5 mm
Pico2 dual12bitadc
Sev5000/RP2350B_DualADC_DualPCM
A PCB to neatly package a rp2350b with two 12bit high speed adc and four channel audio input for use with hsdaoh
76 parts23 - 2 layers75 × 60 mm
DUTler V2
TheYoctoJester/dutler
A bench butler for your Device Under Test: turns a Raspberry Pi Pico into a USB-serial console bridge with power-relay and MOSFET strap/reset control for embedded-Linux bring-up and hardware-in-the-loop.
54 parts23Apache-2.0 - 4 layers55.5 × 64.5 mm
Pico2 12bitadc
Sev5000/Pico2_12bitADC_PCMAudio
PCB to neatly package a Raspberry Pi Pico 2 with an AD9226 12bit ADC and PCM1802 for capture with HSDAOH
36 parts22 - 2 layers88 × 88 mm
- 4 layers54.7 × 78.5 mm
DisplayModule PONSv71
MasaoC/GPS-TFT-Map_PONS
鳥人間コンテストに特化したGNSS誘導システム。人力飛行機のパイロットが使いやすいことを目標にした航法装置です。ハードとソフトをオープンソースで開発しています。
151 parts14MIT - 2 layers187.3 × 109.5 mm
Z80RP2350b
kysilv/z80-rp2350b-zx-compatible
Retrocomputer compatible with ZX Spectrum based on real Z80 + discrete RAM/ROM + rp2350b as ULA
131 parts9GPL-3.0 - 2 layers125 × 72 mm
Simut PCB
angeloINTJ/simut
Sistema Integrado de Monitoramento Universal e Telemetria: open-source firmware for the Raspberry Pi Pico W and Pico 2 W.
27 parts7MIT - 4 layers68.6 × 53.3 mm
- 4 layers50 × 70 mm
- 2 layers16.9 × 51.3 mm
- 2 layers78 × 79 mm
Nri g13-shifter
serdzz/rp2350-sim800l-ppp
Embassy firmware for Waveshare RP2350-Plus + SIM800L: AT setup via atat, IP over PPP (embassy-net-ppp), sockets via embassy-net. Optional USB CDC logger.
38 parts2Apache-2.0 - 2 layers74.6 × 94.5 mm
E1 power dist 2s
Telfair8632/sr71-600
Twin-engine 600 mm RC Blackbird: parametric FreeCAD CAD, a 14-level Pico 2 firmware verification ladder, and a complete QA-evidenced digital build package
41 parts2MIT - 2 layers40 × 100 mm
PicoDCC
bazauto/PicoDCC
DCC command station firmware for the Raspberry Pi Pico 2 — PIO-generated track signal, partial DCC-EX protocol for JMRI, LVGL touchscreen UI
28 parts1MIT - 2 layers165.1 × 95.3 mm
Pico concole v2 daughter board
Crem2y/pico-console-v2-pcb
pico console v2 board (firmware : https://github.com/Crem2y/pico-console-v2)
232 parts1MIT - 2 layers100 × 65 mm
Fabric Analyser PCB
Jerome-Graves/fabric-analyser
Automated cross-polarised optical scanner for measuring crystal orientation fabric (COF) in ice-core thin sections: RP2350 firmware, Python control/calibration software, KiCad hardware, and full docs.
21 parts1MIT - 4 layers51.5 × 21 mm
Pico-2v
lucasbaizer/pico-2v
RP2354A development board with switchable voltage, QSPI breakout, and more
53 parts1 - 2 layers34 × 28 mm
Hyperion
adamhrnciar/hyperion-controller
Open-source controller for 150 g antweight combat robots: RP2354A, 2x DRV8231A, 2-4S, ELRS/CRSF/SBUS/iBUS/PPM input, IMU. KiCad 10, CERN-OHL-S-2.0.
90 partsCERN-OHL-S-2.0 - 2 layers147.3 × 154.4 mm
