

Pico concole v2 daughter board
pico console v2 board (firmware : https://github.com/Crem2y/pico-console-v2)
- Size
- 165.1 × 95.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 232
- Nets
- 200
- Pads
- 805
- Tracks, vias
- 1,800, 458
- Pours
- 47
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Apr 2026
- Updated
- 22 Oct 2026
Overview
Pico concole v2 daughter board is an open-source printed circuit board by Crem2y, from the Crem2y/pico-console-v2-pcb repository on GitHub, published under the MIT licence. It is a 2-layer board of 165.1 × 95.3 mm with 232 parts on 200 nets, routed with 1,800 tracks and 458 vias.
It is built around the PAM8403DR, W25Q16JVSSIQ and BQ25619RTW, with the MPU-6050, PCM5102APW and USBLC6-2SC6 among its other parts. Its parts include 54 capacitors, 41 resistors, 22 diodes, 19 switches and 10 ICs. It belongs with the retro computing and games boards and the RP2040 and RP2350 boards of this library.
Main components
12PAM8403DR
SOIC-16-40℃~+85℃ -59dB 0.15% 2 Single-Ended Inputs 2-Channel 2.8V~5.5V 3Wx2@4Ω 80dB 87% 8mA Class D Filterless architecture SOIC-16 Audio Amplifiers ROHSDiodes IncorporatedAudio AmplifiersW25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHBQ25619RTW
WQFN-24-EP(4x4)-40℃~+85℃ 1 1.5A 4.52V 4V~13.5V 9.5uA Charging IC I2C Lithium Battery Support Support WQFN-24-EP(4x4) Battery Management ROHSTexas InstrumentsBattery ManagementMPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersPCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)SM03B-SRSS-TB
Header SR 1.0 SMT side entry, 1mm pitchJSTUncategorisedABM8-272-T3
SMD3225-4P-40℃~+85℃ 10pF 12MHz 50Ω SMD crystal oscillator ±30ppm ±30ppm SMD3225-4P Crystals ROHSAbraconCrystalsAOTA-B201610S3R3-101-T
0806115mΩ 2.1A 2.4A 3.3uH Molded inductor 0806 Molding Power Inductors ROHSAbraconPower InductorsMAPM0420F-2R2M-LF
SMD,4.9x4.4mm2.2uH 3A 4A 58mΩ ±20% SMD,4.9x4.4mm Power Inductors ROHSmicrogatePower InductorsSJ2-35954B-SMT-TR
--25℃~+85℃ 12V 1A Copper alloy Gold - Audio Connectors ROHSCUIAudio Connectors (Headphones)SS8050
SOT-323-55℃~+150℃ 1 NPN 1.5A 100MHz 100nA 200 25V 300mW 500mV 5V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdPico console V2 Board

A custom handheld console platform built around dual RP2350 microcontrollers, featuring a dedicated main processor and southbridge.
The board integrates a display, audio system, game controls, sensors, and external interfaces, with communication between the two MCUs.
Note: This board requires a separate RP2350A Main Board to operate.
Specifications
- Main MCU: Raspberry Pi RP2350A
- Southbridge MCU: Raspberry Pi RP2350B
- Flash: 1-16 MB
- Display: 480x320 LCD with touch panel
- Audio: Stereo speakers, 3.5 mm audio jack
- Controls: Dual analog sticks, D-pad, face buttons, and additional function buttons
- Sensors: 6-axis IMU
- Haptics: Dual LRA actuators
- Communication: UART-based inter-MCU communication
- External interfaces: IR transceiver, Qwiic/ST connector
- Expansion: 10-pin FPC connector (0.5 mm pitch), additional GPIO/ADC pads
- Power inputs: VUSB (1.8-5.5 V), BAT (3.0-4.2 V)
- Debug: SWD interfaces
Pinout

Schematics

PCB

Design Files
- EDA: KiCad 9.0
- PCB design and schematic source files are available in this repository.
Parts
232| Qty | Value | Footprint | References |
|---|---|---|---|
| 33 | TP | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP25, TP26, TP27, TP32 +17 |
| 18 | 1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19, C20, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35, C36, C41, C42 +2 |
| 17 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R13, R14, R15, R26, R27, R28, R29, R30, R31, R32, R33, R36, R38, R39, R40 +1 |
| 16 | D_Small | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16 |
| 15 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C16, C47, C51 |
| 12 | 1k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R6, R7, R8, R9, R10, R11, R20, R21, R22, R23, R34, R37 |
| 12 | M2 | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 12 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H7.3mm | SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19 |
| 5 | 10u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C43, C45, C52, C54, C55 |
| 5 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | LED2, LED3, LED4, LED5, LED6 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R17, R18, R19 |
| 4 | 470n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C21, C22, C23, C24 |
| 4 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 3 | 2.2n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C39, C40, C48 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C14, C15 |
| 3 | FerriteBead_Small | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | FB1, FB2, FB3 |
| 3 | Jumper_2_Small_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP6, JP7, JP8 |
| 3 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 | SW1, SW2, SW3 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C17, C18 |
| 2 | 2.2u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C37, C38 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5 |
| 2 | 470 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R24, R25 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | Conn_02x12 | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical_SMD | J4, J5 |
| 2 | PAM8403D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U7, U8 |
| 2 | SM03B-SRSS-TB | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J1, J2 |
| 2 | SW_Push | Button_Switch_THT:SM-05H-0xC-Zippy | SW4, SW6 |
| 2 | SW_Push | Button_Switch_THT:SM-05H-0xD-Zippy | SW5, SW7 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R35 |
| 1 | 33 | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | R3 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C46 |
| 1 | 47n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C44 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AOTA-B201610S3R3-101-T | Library:L_pol_2016 | L1 |
| 1 | BQ25619 | Package_DFN_QFN:Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U10 |
| 1 | Battery | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | BAT1 |
| 1 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J7 |
| 1 | Conn_01x10_MountingPin | Connector_FFC-FPC:TE_1-1734839-0_1x10-1MP_P0.5mm_Horizontal | J6 |
| 1 | Conn_01x40_MountingPin | Connector_FFC-FPC:Amphenol_F32Q-1A7x1-11040_1x40-1MP_P0.5mm_Horizontal | DP1 |
| 1 | GND | TestPoint:TestPoint_Pad_1.0x1.0mm | TP31 |
| 1 | IR | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear | LED1 |
| 1 | Joy1 | Connector_FFC-FPC:TE_0-1734839-5_1x05-1MP_P0.5mm_Horizontal | JOY1 |
| 1 | Joy2 | Connector_FFC-FPC:TE_0-1734839-5_1x05-1MP_P0.5mm_Horizontal | JOY2 |
| 1 | LED1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP20 |
| 1 | LED2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP22 |
| 1 | LED3 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP24 |
| 1 | LED4 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP29 |
| 1 | LRA_L | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | LRA1 |
| 1 | LRA_R | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | LRA2 |
| 1 | MAPM0420F-2R2M-LF | Library:Inductor_SMD_L_4.9x4.4_H2 | L2 |
| 1 | MPU-6050 | Sensor_Motion:InvenSense_QFN-24_4x4mm_P0.5mm | U9 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | RP2350_80QFN | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U2 |
| 1 | SJ2-35954B-SMT-TR | Connector_Audio:Jack_3.5mm_CUI_SJ2-3593D-SMT_Horizontal | AUDIO1 |
| 1 | SPK_L | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | SPK1 |
| 1 | SPK_R | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | SPK2 |
| 1 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | TSOP34S40F | OptoDevice:Vishay_MOLD-3Pin | U4 |
| 1 | Temperture | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | NTC1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | VIN | TestPoint:TestPoint_Pad_1.0x1.0mm | TP30 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
| 1 | WL1 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP19 |
| 1 | WL2 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP21 |
| 1 | WL3 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP23 |
| 1 | WL4 | TestPoint:TestPoint_Pad_1.0x1.0mm | TP28 |
| 1 | XPT2046TS | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U5 |
Similar boards
- 2 layers63.5 × 40.6 mm

- 4 layers85 × 120 mm

Gameboy
MeesCode/gameboy-pcb
custom gameboy-esque pcb running an stm32 and my own tiny game engine
134 parts - 2 layers52 × 42 mm

- 4 layers44.3 × 95.9 mm

- 6 layers29 × 80.6 mm

BladeCore M54E
DvidMakesThings/HW_PDNode-600-Pro
The PDNode-600 is a professional-grade, 600W USB Power Delivery Unit designed specifically for compact 10-inch rack systems, targeting embedded developers, homelab enthusiasts, test benches, and smart infrastructure.
150 parts86AGPL-3.0 - 4 layers52.6 × 51.6 mm

Eos learn rp2350
embeddedos-org/eCAD-Hardware-Products
Hardware designs + EE docs + Board datasheets of Multiple products
53 parts8MIT - 4 layers76 × 54 mm

Pixelblaze battery backpack
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics
112 parts1 - 2 layers189 × 92.3 mm

Questions
How big is the Pico concole v2 daughter board PCB?
It measures 165.1 × 95.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pico concole v2 daughter board use?
232 parts, built around the PAM8403DR, W25Q16JVSSIQ, BQ25619RTW and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pico concole v2 daughter board KiCad files?
From the Crem2y/pico-console-v2-pcb repository on GitHub, at the commit this page was made from: the board is pico_concole_v2_daughter_board.kicad_pcb and its schematic Daughterboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pico concole v2 daughter board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).