

Aura mon
RP-2350 Energy Data Logger
- Size
- 44.3 × 95.9 mm
- Copper layers
- 4
- Thickness
- 1.65 mm
- Parts
- 119
- Nets
- 117
- Pads
- 450
- Tracks, vias
- 824, 248
- Pours
- 449
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Sep 2025
- Updated
- 10 Oct 2026
Overview
Aura mon is an open-source printed circuit board by nrwiersma, from the nrwiersma/aura-mon repository on GitHub. It is a 4-layer board of 44.3 × 95.9 mm with 119 parts on 117 nets, routed with 824 tracks and 248 vias.
It is built around the RP2350A, W25Q128JVSIQ and AMS1117-3.3, with the SN65HVD75DR, PCF85063ATT/AJ and W5500 among its other parts. Its parts include 38 capacitors, 31 resistors, 22 connectors, 6 ICs and 5 diodes. It belongs with the sensors and measurement and interfaces and adapters boards and the RP2350 boards of this library.
Main components
12RP2350A
QFN-60-EP(7x7)Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、Integrated LDO、True random number generator (TRNG)、Hardware ECC check QFN-60-EP(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSN65HVD75DR
SOP-8SOP-8 RS-485 / RS-422 ICs ROHSElecSuperRS-485 / RS-422 ICsPCF85063ATT/AJ
TSSOP-8-3mm-40℃~+85℃ 0.22uA 220nA 900mV~5.5V External I2C Temperature compensation、Programmable clock output、Alarm function、Periodic interrupt output、Countdown timer Yes TSSOP-8-3mm Real Time Clocks ROHSNXP SemiconductorsReal Time ClocksW5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet ControllersB3B-PH-K-S(LF)(SN)
插件,P=2mm-25℃~+85℃ 1 100V 1x3P 2A 2mm 3 3P 4.5mm 6mm 7.9mm Brass K Pin PA66 PH Through Hole Tin UL94V-0 White 插件,P=2mm Wire To Board Connector ROHSJSTWire To Board ConnectorRC0402JR-0710KL
UncategorisedUnknown makerRC0402FR-7W470RL
0402-55℃~+155℃ 125mW 470Ω 50V Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountRC0603FR-0749R9L
UncategorisedUnknown makerRC0402FR-0710RL
UncategorisedUnknown makerCC0603KRX7R0BB682
0603100V 6.8nF X7R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMT
README
README.md
Aura Mon is an RP2350-based energy data logger built around the tiny SPM01 Modbus meter. It samples power data over RS485, stores it on an SD card, and serves a local HTTP API and web UI over Ethernet.
At a glance
- RP2350 microcontroller
- Modbus RTU over RS485 (SPM01)
- Ethernet for reliable network connectivity
- SD card logging and static web UI hosting
- RTC for timestamped data
- HTTP API with OTA updates and metrics
System overview
Data flow
Why
The goal of this project is to create a reliable and easy-to-use energy data logger that can be used to monitor energy consumption in a home or small business. The SPM01 is a very affordable energy meter that can measure voltage, current, power, energy, and power factor while fitting in tight electrical panels.
Quick start
- Assemble the board and connect the SPM01 to the RS485 terminals.
- Insert an SD card (required for logging).
- Power the board with a regulated 5V supply on the screw terminals (or via USB-C with the jumper fitted for testing).
- Connect Ethernet and find the device IP via your router's DHCP lease table.
- Open
http://<device-ip>to view the UI and use the API.
Firmware
The firmware lives in firmware/ and is written in C++ using the Arduino framework.
- Build/flash instructions:
firmware/FIRMWARE.md - HTTP API reference:
firmware/API.md
API highlights
GET /statusfor live readings and runtime stats.GET /energyfor CSV data export.GET /logsfor log streaming.GET/POST /configfor device configuration.POST /otafor firmware updates.GET /metricsfor Prometheus-style metrics.
Powering
The board can be powered using an external 5V power supply connected to the screw terminals. For testing purposes, it can also be powered via USB-C after connecting the onboard jumper.
Safety
[!WARNING] This project interfaces with mains-connected equipment. Only install it if you are qualified and follow local electrical safety requirements.
Project status
The firmware and hardware are still in development and are only tested on the author's hardware. Expect rough edges and please report issues or improvements.
Changelog
v0.1.0
- Initial schematic and board
- Initial firmware with basic functionality to read from the SPM01 and store data on the SD card
Parts
119| Qty | Value | Footprint | References |
|---|---|---|---|
| 21 | 100n | AuraMon:C_0402_1005Metric | C3, C10, C11, C12, C13, C14, C15, C16, C17, C19, C21, C23, C25, C26, C28, C29 +5 |
| 12 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J10, J11, J12, J13, J14, J15, J16, J17, J18, J19, J20, J21 |
| 7 | 10k | Resistor_SMD:R_0402_1005Metric | R9, R10, R11, R20, R21, R22, R23 |
| 5 | 4.7u | AuraMon:C_0402_1005Metric | C7, C8, C20, C27, C30 |
| 4 | 15p | AuraMon:C_0402_1005Metric | C1, C2, C18, C22 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R4, R6, R24, R30 |
| 4 | 470 | Resistor_SMD:R_0402_1005Metric | R18, R19, R25, R26 |
| 4 | 49R9 | Resistor_SMD:R_0603_1608Metric | R14, R15, R16, R17 |
| 2 | 10 | Resistor_SMD:R_0402_1005Metric | R28, R29 |
| 2 | 120 | Resistor_SMD:R_0402_1005Metric | R12, R31 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C36, C37 |
| 2 | 27 | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 4.7u | AuraMon:C_0402_1005Metric_small_pads | C4, C5 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 6.8n | Capacitor_SMD:C_0603_1608Metric | C32, C33 |
| 2 | Conn_01x06 | Connector_JST:JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J2, J7 |
| 2 | LOGO | AuraMon:Jumper | G***, G*** |
| 2 | LOGO | AuraMon:Arrow2 | G2, G2 |
| 2 | SW_Push | AuraMon:PTS815SJM250SMTRLFS | SW2, SW3 |
| 1 | 0 | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 100 | AuraMon:R_0402_1005Metric | R27 |
| 1 | 10n | AuraMon:C_0402_1005Metric | C24 |
| 1 | 12.4k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 1881448 | AuraMon:PHOENIX_1881448 | J6 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C31 |
| 1 | 3.3u | AuraMon:L_pol_2016 | L1 |
| 1 | 33 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | ABM8-272-T3 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5 |
| 1 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D4 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | Conn_01x03 | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x06 | Connector_JST:JST_SUR_BM06B-SURS-TF_1x06-1MP_P0.80mm_Vertical | J9 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_1.27mm:PinHeader_2x02_P1.27mm_Vertical | J8 |
| 1 | D_Schottky_Small | Diode_SMD:D_SOD-323 | D1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | LOGO | AuraMon:Arrow1 | G4 |
| 1 | LOGO | AuraMon:Logo | G10 |
| 1 | LOGO | AuraMon:Arrow3 | G3 |
| 1 | MAX3485 | AuraMon:SOIC-8 | U3 |
| 1 | MH2029-300Y | AuraMon:L0805 | FB1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | AuraMon:AMPHENOL_1140084168 | J5 |
| 1 | OSHW-Symbol_6.7x6mm_SilkScreen | Symbol:OSHW-Symbol_6.7x6mm_SilkScreen | OSHW |
| 1 | PCF8563TS | Package_SO:MSOP-8_3x3mm_P0.65mm | U6 |
| 1 | RJ45_Hanrun_HR911105A_Horizontal | AuraMon:RJ45_Hanrun_HR911105A_Horizontal | J4 |
| 1 | RP2350A | AuraMon:QFN-60_7X7_RPI | U2 |
| 1 | Red Green | LED_SMD:LED_LiteOn_LTST-C295K_1.6x0.8mm | D3 |
| 1 | SM03B-SRSS-TB | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | J22 |
| 1 | SM712_SOT23 | Package_TO_SOT_SMD:SOT-23 | D5 |
| 1 | USB_C_Receptacle_USB2.0_16P | AuraMon:USB-C-SMD_TYPEC-305-ACP16H458 | J1 |
| 1 | W25Q128JVS | AuraMon:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |
| 1 | WEEE-Logo_5.6x8mm_SilkScreen | Symbol:WEEE-Logo_5.6x8mm_SilkScreen | SS3 |
| 1 | X321532768KGD2SI | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y3 |
| 1 | XO32F025000GEHE001 | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
Similar boards
- 4 layers90 × 40 mm

- 4 layers230 × 42 mm

- 4 layers100 × 100 mm

- 4 layers140 × 81 mm

- 4 layers22 × 22.2 mm

Tasgdo
nrwiersma/tasgdo
TasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local Matter controller.
41 partsMIT - 4 layers100 × 80 mm

- 2 layers38.1 × 38.1 mm

- 2 layers101.4 × 69.4 mm

Questions
How big is the Aura mon PCB?
It measures 44.3 × 95.9 mm and has 4 copper layers, 1.65 mm thick.
What parts does the Aura mon use?
119 parts, built around the RP2350A, W25Q128JVSIQ, AMS1117-3.3 and SN65HVD75DR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Aura mon KiCad files?
From the nrwiersma/aura-mon repository on GitHub, at the commit this page was made from: the board is hardware/AuraMon.kicad_pcb and its schematic hardware/AuraMon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Aura mon design in my own project?
Its repository states no licence, so its author keeps all rights: ask nrwiersma before reusing the design.