Skip to the content

W5500

WIZNETExtended

-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHS

Part id
wiznet/W5500
Category
Ethernet Controllers
Package
LQFP-48_7x7
Pins
48
In stock
5,278 at JLCPCB (C32843)
Used on
164 open-source boards

Overview

The W5500 is an ethernet Controller made by WIZNET in a LQFP-48_7x7 package with 48 pins. -40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHS.

PCBKit's library has its KiCad symbol (Interface_Ethernet:W5500, from KiCad's library) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 5,278 are in stock at JLCPCB (part C32843). 164 open-source boards in 132 repositories on GitHub use it.

Symbol

1TXN2TXP3AGND4AVDD5RXN6RXP10EXRES118VBG20TOCAP221V2O23RSVD24SPDLED25LINKLED26DUPLED27ACTLED28VDD29GND30XI/CLKIN31XO32SCS33SCLK34MISO35MOSI36INT37RST38RSVD39RSVD40RSVD41RSVD42RSVD43PMODE244PMODE145PMODE0
Interface_Ethernet:W5500From KiCad's library

Footprint

Package_QFP:LQFP-48_7x7mm_P0.5mmFrom KiCad's library

From the datasheet

9
Supply, least
2.97 V · VDD, recommended operating min · p. 59
Supply, most
3.63 V · VDD, recommended operating max · p. 59
Supply, absolute maximum
4.6 V · VDD, absolute max · p. 58
Works from
-40 °C · Operating temperature min · p. 58
Works up to
85 °C · Operating temperature max · p. 58
Junction, hottest
125 °C · Junction temperature absolute max · p. 58
Takes working
132 mA · Normal operation typical, VDD = AVDD = 3.3 V, Ta = 25°C · p. 59
Takes at most
132 mA · 100M transmitting typical · p. 60
Takes asleep
13 mA · PHY power down typical, VDD = AVDD = 3.3 V, Ta = 25°C · p. 59

What it is and has

12
Hardwired TCP/IP protocols
TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE · p. 2
Hardware sockets
8 independent sockets simultaneously · p. 2
Power down mode
Supported · p. 2
Wake on LAN
Over UDP · p. 2
SPI
Modes 0 and 3 · p. 2
TX/RX buffer memory
32 Kbytes · p. 2
Ethernet PHY
Embedded 10BaseT/100BaseTX · p. 2
Auto negotiation
Full and half duplex, 10 and 100-based · p. 2
IP fragmentation
Not supported · p. 2
I/O tolerance
5 V with 3.3 V operation · p. 2
LED outputs
Full/Half duplex, Link, Speed, Active · p. 2
Package
48 Pin LQFP Lead-Free, 7x7mm, 0.5mm pitch · p. 2

Specifications

40
ParameterConditionsAs printedPage
DC Supply voltage VDDmin -0.5 · max 4.6 V58
DC input voltage VINmin -0.5 · max 6 V58
DC output voltage VOUTmin -0.5 · max 4.6 V58
DC input current IINRating: ±5 mAmin -5 · max 5 mA58
Operating temperature TOPmin -40 · max 85 C58
Maximum junction temperature TJMAXmax 125 C58
Storage temperature TSTGmin -65 · max 150 C58
Electrostatic discharge voltage (human body model) VESD(HBM)TA = +25 °C, conforming to MIL-STD 883F Method 3015.7; Class 2max 2000 V58
Electrostatic discharge voltage (man machine model) VESD(MM)TA = +25 °C, conforming to JEDEC EIA/JESD22 A115-A; Class Bmax 200 V58
Electrostatic discharge voltage (charge device model) VESD(CDM)TA = +25 °C, conforming to JEDEC JESD22 C101-C; Class IIImax 500 V58
Supply voltage VDDApply VDD, AVDD; Ta = –40 to 85°Cmin 2.97 · typ 3.3 · max 3.63 V59
High level input voltage VIHTa = –40 to 85°Cmin 2 · max 5.5 V59
Low level input voltage VILTa = –40 to 85°Cmin -0.3 · max 0.8 V59
Threshold point VTAll inputs except XI; Ta = –40 to 85°Cmin 1.3 · typ 1.41 · max 1.53 V59
Schmitt trig Low to High Threshold point VT+All inputs except XI; Ta = –40 to 85°Cmin 1.53 · typ 1.64 · max 1.73 V59
Schmitt trig High to Low Threshold point VT-All inputs except XI; Ta = –40 to 85°Cmin 0.95 · typ 1.02 · max 1.09 V59
Junction temperature TJTa = –40 to 85°Cmin -40 · typ 25 · max 125 °C59
Input Leakage Current ILTa = –40 to 85°C; maximum magnitude ±1max 1 A59
Pull-up Resistor RPUSCSn, RSTn, PMODE[2:0]; Ta = –40 to 85°Cmin 50 · typ 77 · max 112 Kohm59
Pull-down Resistor RPDRSVD(Pin 23, Pin 38 ~ Pin 42); Ta = –40 to 85°Cmin 48 · typ 85 · max 174 Kohm59
Low level output voltage VOLIOL = 8mA, All outputs except XO; Ta = –40 to 85°Cmax 0.4 V59
High level output voltage VOHIOH = 8mA, All outputs except XO; Ta = –40 to 85°Cmin 2.4 V59
Low level output Current IOLVOL = 0.4V, All outputs except XO; Ta = –40 to 85°Cmin 8.6 · typ 13.9 · max 18.9 mA59
High level output Current IOHVOH = 2.4V, All outputs except XO; Ta = –40 to 85°Cmin 12.5 · typ 26.9 · max 47.1 mA59
Supply Current (Normal operation mode) IDD1VDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 132 mA59
Supply Current (Power Down mode) IDD2PHY Power Down mode, VDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 13 mA59
100M LinkVDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 128 mA60
10M LinkVDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 75 mA60
Un-Link (Auto-negotiation mode)VDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 65 mA60
100M TransmittingVDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 132 mA60
10M TransmittingVDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 79 mA60
Power Down modeVDD=3.3V, AVDD=3.3V, Ta = 25°Ctyp 13 mA60
Reset Cycle Time TRCmin 500 us60
RSTn to internal PLOCK (PLL Lock) TPLmax 1 ms60
FrequencySpecified frequencytyp 25 MHz60
Frequency Tolerance (at 25℃)±30 ppmmin -30 · max 30 ppm60
Shunt Capacitancemax 7 pF60
Drive LevelSpecified drive leveltyp 59.12 uW60
Load CapacitanceSpecified load capacitancetyp 18 pF60
Aging (at 25℃)Maximum magnitude ±3 ppm / yearmax 3 ppm / year60

Open-source boards using it

164See all 164
  • 2 layers79 × 38 mmEthersweep, the printed circuit board in 3D

    Ethersweep

    Neumi/ethersweep

    Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

    111 parts587
  • 4 layers119 × 79 mmLuxdmx, the printed circuit board in 3D

    Luxdmx

    tombueng/LuxDMX

    Open-source Art-Net / sACN (E1.31) → DMX512 gateway for ESP32 / ESP32-S3 / Ethernet. Live web UI shows all 512 channels in real time, flags console conflicts, and drives galvanically-isolated DMX.

    97 parts97
  • 2 layers52.3 × 21.8 mmW5500, the printed circuit board in 3D

    W5500

    multigcs/riocore

    riocore

    38 parts91GPL-2.0
  • 4 layers72.6 × 170 mmOpenJBOD RP2040, the printed circuit board in 3D

    OpenJBOD RP2040

    OpenJBOD/rp2040

    This repository contains the hardware design files OpenJBOD RP2040 Baseboard.

    129 parts87CERN-OHL-P-2.0
  • 4 layers100 × 75 mmFreedo radio, the printed circuit board in 3D

    Freedo radio

    CappyT/freedo

    Local coordinator for tado V3+ heating devices, with a Home Assistant integration and add-on

    135 parts33Apache-2.0
  • 2 layers123 × 87.5 mmFastLOGIC, the printed circuit board in 3D

    FastLOGIC

    Neumi/fastLOGIC

    An affordable Arduino-based board designed for straightforward (industrial) logic control, ideal for building small-scale automation and control solutions.

    180 parts23MIT
  • 2 layers67 × 100 mmNpr revB, the printed circuit board in 3D

    Npr revB

    slintak/NPR70

    The New Packet Radio on 70 cm band. Based on the project NPR from F4HDK.

    136 parts23GPL-3.0
  • 4 layers190 × 100 mmRioctrl controller, the printed circuit board in 3D

    Rioctrl controller

    festlv/rioctrl-hw

    Hardware design for modular CNC controller

    281 parts16CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the W5500?

Yes. The symbol is Interface_Ethernet:W5500 and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the W5500?

LQFP-48_7x7, with 48 pins. Its footprint is drawn on this page.

Where is the W5500 datasheet?

WIZNET publishes it: the Datasheet link on this page opens it.

Where can I order the W5500?

JLCPCB lists it as part C32843, with 5,278 in stock; the sellers' links on this page open their listings.

What can replace the W5500?

Parts like it in the library: the CH394Q by WCH (Nanjing Qinheng Microelectronics), the DM9000AEP by DAVICOM, the DM9000CEP by DAVICOM and the CH390L by WCH (Nanjing Qinheng Microelectronics). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the W5500?

164 boards in 132 repositories on GitHub; the most starred are listed on this page, with their KiCad files.