

Tasgdo
TasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local Matter controller.
- Size
- 22 × 22.2 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 41
- Nets
- 44
- Pads
- 156
- Tracks, vias
- 195, 104
- Pours
- 66
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Jan 2025
- Updated
- 10 Feb 2026
Overview
Tasgdo is an open-source printed circuit board by nrwiersma, from the nrwiersma/tasgdo repository on GitHub, published under the MIT licence. It is a 4-layer board of 22 × 22.2 mm with 41 parts on 44 nets, routed with 195 tracks and 104 vias.
It is built around the ESP32-C3FH4, RC0402FR-0710KL and RK73H1ETTP1001F, with the CL05C120JB51PNC, CL21A106KBYQNNE and PWCWAQ2012F-100KTT among its other parts. Its parts include 14 capacitors, 12 resistors, 3 diodes, 3 connectors and 3 switches. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12ESP32-C3FH4
QFN-32-EP(5x5)160MHz 32 Bit 3V~3.6V 400KB RISC-V Watchdog reset、Software reset、Built-in general-purpose timer、Programmable watchdog、Built-in temperature sensor、True random number generator (TRNG)、Storage encryption、Infrared remote control QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)RC0402FR-0710KL
UncategorisedUnknown makerRK73H1ETTP1001F
0402-55℃~+155℃ 100mW 1kΩ 75V Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSKOA Speer ElectronicsChip Resistor - Surface MountCL05C120JB51PNC
040212pF 50V C0G ±5% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21A106KBYQNNE
080510uF 50V X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTPWCWAQ2012F-100KTT
08051.105Ω 10uH 30MHz 600mA Wire-wound chip inductor ±10% 0805 Inductors (SMD) ROHSPROD TechInductors (SMD)MLG1005S2N4BT000
04022.4nH 7@100MHz 7GHz 800mA 80mΩ Multilayer inductor 0402 Inductors (SMD) ROHSTDKInductors (SMD)CL21A226KPCLRNC
080510V 22uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL05C2R4CB5NNNC
04022.4pF 50V C0G 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTCL05C2R7BB5NNNC
04022.7pF 50V C0G 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMTAC0402FR-0769K8L
0402-55℃~+155℃ 50V 62.5mW 69.8kΩ Thick Film Resistor ±1% ±100ppm/℃ 0402 Chip Resistor - Surface Mount ROHSYAGEOChip Resistor - Surface MountGAQY212GSX
SOP-4-40℃~+85℃ 1.32V 100us 180mΩ 1A 2.5kV 350us 5000MΩ 500mW 50mA 60V AC,DC One set normally open: 2A (SPST - normally open) SOP-4 Solid State Relays (MOS Output) ROHSSUPSiCSolid State Relays (MOS Output)
README
README.mdTasGDO is an ESP32 Garage Door Controller, intended to be used with Tasmota for a local
Matter controller.

Pinout

GPIO Pins
| Pin | Function |
|---|---|
| 0 | Solid State Relay |
| 3 | Link LED |
| 4 | Reed/limit switch sensor (User configurable) |
| 5 | Reed/limit switch sensor (User configurable) |
| 6 | Relay LED |
| 9 | Button to operate the Solid State Relay/Enter flash mode |
Setup
Once Tasmota has been installed, the following template can be set:
{"NAME":"TasGDO","GPIO":[224,0,0,544,1,1,288,0,0,32,0,0,0,0,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":1}Then run the following Commands in the Console:
PulseTime1 10sets the relay to turn off after 1s.
SetOption1 1
SetOption13 1sets the button to respond immediately
SwitchMode2 15
SwitchMode3 15detaches Switch2 and Switch3 from the relays, which are not set. To be used
with GPIO4 and GPIO5.
BOM
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Hardware Components:C_0402_1005Metric | C1, C3, C5, C29, C30 |
| 4 | 10k | Hardware Components:R_0402_1005Metric | R1, R3, R7, R8 |
| 3 | 1K | Hardware Components:R_0402_1005Metric | R4, R5, R6 |
| 2 | 12pF | Hardware Components:C_0402_1005Metric | C23, C24 |
| 2 | 5k1 | Hardware Components:R_0402_1005Metric | R13, R14 |
| 1 | 10n | Hardware Components:C_0402_1005Metric | C2 |
| 1 | 10u | Hardware Components:C_0805_2012Metric | C6 |
| 1 | 10u | Hardware Components:L_0805_2012Metric | L2 |
| 1 | 10u | Hardware Components:C_0402_1005Metric | C4 |
| 1 | 1u | Hardware Components:C_0402_1005Metric | C34 |
| 1 | 2.4nH | Hardware Components:L_0402_1005Metric | L1 |
| 1 | 220 | Hardware Components:R_0402_1005Metric | R2 |
| 1 | 22k1 | Hardware Components:R_0402_1005Metric | R9 |
| 1 | 22u | Hardware Components:C_0805_2012Metric | C9 |
| 1 | 2p4 | Hardware Components:C_0402_1005Metric | C26 |
| 1 | 2p7 | Hardware Components:C_0402_1005Metric | C25 |
| 1 | 69k8 | Hardware Components:R_0402_1005Metric | R10 |
| 1 | AQY212GSX | Hardware Components:SSR_SUPSiC_GAQY212GSX | K1 |
| 1 | Ant_RFECA3216060A1T_1206 | Hardware Components:Ant_RFECA3216060A1T | AE1 |
| 1 | Conn_01x03 | Hardware Components:Conn_JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J3 |
| 1 | Conn_01x04 | Hardware Components:Conn_JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J1 |
| 1 | Conv_LMR54410DBVR | Hardware Components:SOT-23-6 | U1 |
| 1 | D_Schottky_Small | Hardware Components:D_0402_1005Metric | D1 |
| 1 | ECS-400-10-37B2-CKM-TR | Hardware Components:Oscillator_ECS_400-10-37B2-CKM-TR | Y2 |
| 1 | ESP32-C3 | Hardware Components:QFN-32-1EP | U3 |
| 1 | KSC241J LFS | Hardware Components:SW_CK_KSC241JLFS | SW2 |
| 1 | LED_Dual_AAKK | Hardware Components:LED_LiteOn_LTST-C295K_1.6x0.8mm | D5 |
| 1 | Red | Hardware Components:LED_0603_1608Metric | D4 |
| 1 | SW_Push | Hardware Components:SW_PTS815SJM250SMTRLFS | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Hardware Components:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J10 |
Similar boards
- 4 layers23.2 × 43 mm

- 4 layers230 × 42 mm

- 4 layers44.3 × 95.9 mm

- 4 layers100 × 80 mm

- 2 layers49 × 67 mm

Calliope mirror heater
openUC2/TechnicalDocs-openUC2-HoloBox
This is the holographic box for openUC2
67 parts5 - 4 layers65 × 40 mm

HEXBERRY V-20Q100
logitiles/HEXBERRY-V-20Q100-0.91
Open Hardware FPGA platform
195 parts4CERN-OHL-S-2.0 - 4 layers38.4 × 128.5 mm

- 4 layers40 × 65 mm

P-1000101 Cicada WiSun
EnAccess/Cicada-WiSUN-HW
IoT Communications Module for Energy Access. A quick way to get production ready, bi-directional communications for your IoT embedded device.
118 parts
Questions
How big is the Tasgdo PCB?
It measures 22 × 22.2 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Tasgdo use?
41 parts, built around the ESP32-C3FH4, RC0402FR-0710KL, RK73H1ETTP1001F and CL05C120JB51PNC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tasgdo KiCad files?
From the nrwiersma/tasgdo repository on GitHub, at the commit this page was made from: the board is TasGDO.kicad_pcb and its schematic TasGDO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tasgdo design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).