

Masjid2
Hardware, software, and devlog of the Athan Lamp project.
- Size
- 76 × 45.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 60
- Nets
- 45
- Pads
- 170
- Tracks, vias
- 376, 67
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 23 Apr 2026
- Updated
- 30 Jul 2026
Overview
Masjid2 is an open-source printed circuit board by Mahmoud1205, from the Mahmoud1205/AthanLamp repository on GitHub, published under the MIT licence. It is a 2-layer board of 76 × 45.2 mm with 60 parts on 45 nets, routed with 376 tracks and 67 vias.
It is built around the ATMEGA328P-PU, LM2596T-5.0 and TDA2003, with the W25Q32JVSSIQ, AMS1117-3.3 and 100UF25V among its other parts. Its parts include 19 capacitors, 16 resistors, 7 connectors, 6 diodes and 5 ICs. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
9ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM2596T-5.0
TO-220-5-40℃~+125℃@(TJ) 1 150kHz 3A 4.5V~40V 5V 5mA Buck Buck Built-in Fixed No TO-220-5 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTDA2003
TO-220B-50.15% 1-Channel 36dB 44mA 65%、69% 6Wx1@6Ω 8V~18V TO-220B-5 Audio Amplifiers ROHSGcoreAudio Power OpAmpsW25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators100UF25V
CAP-SMD_BD6.3-L6.6-W6.6-LS7.2-FDCAP-SMD_BD6.3-L6.6-W6.6-LS7.2-FD SMT ROHSJLCPCB AssemblyUncategorisedSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes330UF 25V 8*12
CAP-TH12mm 2000hrs@105℃ 25V 3.5mm 330uF 340mA@120Hz 8mm 插件,8x12mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - LeadedIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised
README
README.mdAthan Lamp
[blocked]
Hardware, software, and devlog of the Athan Lamp project.
Special Thanks <3
I have to thank Hack Club for sponsoring this project. Specifically, Hack Club Stasis and all of the people who were involved in it. I am so grateful for this organization, and I can't describe my appreciation to them with words. Thanks Hack Club! :)
I also would like to thank the people of Fab Lab Egypt for supporting and helping me in this project in so many ways.
Why make this project?
I recently moved to a home which is far away from a mosque, meaning I cannot hear the athan (Islamic call to prayer) anymore. I could've solve this by installing an athan application on my phone, but I can do better.
So I got the idea of making a device that's placed in my house and can play an athan sound during the athan time according to my location, this device also acts as a lamp because it controls a LED strip.
More info!
I would like to keep this main README short, but check out the Journal.md file for a dev log of the whole project from start to finish!

Showcase of the Athan Lamp project (ignore this; it's only for Hack Club Stasis qualification)
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C6, C7, C9, C10, C11, C16, C19 |
| 3 | 10K | Resistor_SMD:R_0805_2012Metric | R3, R5, R12 |
| 3 | 1R | Resistor_SMD:R_0805_2012Metric | R8, R9, R13 |
| 3 | 220R | Resistor_SMD:R_0805_2012Metric | R7, R14, R17 |
| 2 | 100uF_25V | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C12 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R15 |
| 2 | 22pF | Capacitor_SMD:C_0805_2012Metric | C15, C17 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R10, R11 |
| 2 | 47nF | Capacitor_SMD:C_0805_2012Metric | C13, C14 |
| 2 | SS34 | Diode_SMD:D_SMA | D1, D2 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C8 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P2.00mm | C3 |
| 1 | 12V_CONNx2 | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J1 |
| 1 | 12V_STAT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | 16MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 220uF_16V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C5 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C4 |
| 1 | 330R | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 330uF_25V | Capacitor_THT:CP_Radial_D8.0mm_P3.80mm | C18 |
| 1 | 39R | Resistor_SMD:R_1206_3216Metric | R6 |
| 1 | 3V3_STAT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D6 |
| 1 | 47uH | Inductor_SMD:L_Taiyo-Yuden_MD-3030 | L1 |
| 1 | 5V_STAT | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ATmega328P-P | Package_DIP:DIP-28_W7.62mm | U6 |
| 1 | DS3231_CONNx4 | Connector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm | J7 |
| 1 | FTDI_CONNx6 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | FW0_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1 |
| 1 | ISP_CONNx6 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | LED_STRIP_12V_CONNx2 | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J4 |
| 1 | LIGHT_SWITCH_CONNx2 | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J2 |
| 1 | LM2596T-5 | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U2 |
| 1 | PD7_TP | TestPoint:TestPoint_Pad_2.0x2.0mm | PD7 |
| 1 | PWM_TP | TestPoint:TestPoint_Pad_2.0x2.0mm | PWM |
| 1 | RST_BTN | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | SPEAKER_CONNx2 | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J6 |
| 1 | SPEAKER_TP | TestPoint:TestPoint_Pad_2.0x2.0mm | SPKR |
| 1 | TDA2003 | Package_TO_SOT_THT:TO-220-5_P3.4x3.7mm_StaggerEven_Lead3.8mm_Vertical | U4 |
| 1 | W25Q32JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
Similar boards
- 2 layers111.8 × 81.9 mm

- 2 layers171.1 × 185.1 mm

Mpuled
abbounassima2/STM32-PLC-Runtime-Engine-and-PCB
An STM32F407-based PLC runtime engine developed in Embedded C, together with a custom PLC controller PCB and a Renode-based simulation environment.
189 parts - 4 layers86 × 86 mm

BMS
vadymtaranenko/ESP32-3S-BMS
Prosty, niezawodny system zarządzania pakietami Li-Po 3S oparty na mikrokontrolerze ESP32. Układ komunikuje się po magistrali SPI.
122 parts - 4 layers67 × 98 mm

SJ-201-R6
MycroftAI/hardware-mycroft-mark-II
Mycroft's Mark II Rpi mechanical, electrical and industrial designs
235 parts113 - 2 layers121.5 × 92.5 mm

50W 24-5V Buck OMER 260720V1
yukselturkomer/50w-buck-converter-stm32
Bu proje, STM32 mikrodenetleyici kullanılarak geliştirilmiş 50W kapasiteli bir Buck (Düşürücü) Konvertör sistemini ve bu sistemin kontrolünü sağlayan Nextion HMI (İnsan-Makine Arayüzü) tasarımını içermektedir.
89 parts - 4 layers195 × 159 mm

- 4 layers101.5 × 83.4 mm

Thermostat
jrtaylor71/Smart-Thermostat-Alt-Firmware
A comprehensive, feature-rich smart thermostat firmware for ESP32-S3 microcontrollers with touch display, web interface, and Home Assistant integration.
91 parts2 - 2 layers204.5 × 113 mm

Questions
How big is the Masjid2 PCB?
It measures 76 × 45.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Masjid2 use?
60 parts, built around the ATMEGA328P-PU, LM2596T-5.0, TDA2003 and W25Q32JVSSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Masjid2 KiCad files?
From the Mahmoud1205/AthanLamp repository on GitHub, at the commit this page was made from: the board is Hardware/DesignFiles/KiCAD/Masjid2.kicad_pcb and its schematic Hardware/DesignFiles/KiCAD/Masjid2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Masjid2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).