.kicad_pcb.jpg?size=s&soon)
Thermostat (Before routing)
jrtaylor71/Smart-Thermostat-Alt-Firmware
A comprehensive, feature-rich smart thermostat firmware for ESP32-S3 microcontrollers with touch display, web interface, and Home Assistant integration.

A comprehensive, feature-rich smart thermostat firmware for ESP32-S3 microcontrollers with touch display, web interface, and Home Assistant integration.
Thermostat is an open-source printed circuit board by jrtaylor71, from the jrtaylor71/Smart-Thermostat-Alt-Firmware repository on GitHub. It is a 4-layer board of 101.5 × 83.4 mm with 91 parts on 105 nets, routed with 813 tracks and 100 vias.
It is built around the ESP32-S3-WROOM-1-N16, AHT20 and LM2596T-5.0, with the AMS1117-3.3, 1N4148W and MB6S among its other parts. Its parts include 20 resistors, 14 capacitors, 12 diodes, 7 connectors and 7 switches. It belongs with the home automation and IoT boards and the ESP32 boards of this library.
A comprehensive, feature-rich smart thermostat system built on the ESP32 platform with professional PCB design. Perfect for DIY smart home automation with full Home Assistant integration.
This project is alternative firmware for the excellent smart-thermostat hardware designed by Stefan Meisner.
Original Hardware Project: https://github.com/smeisner/smart-thermostat
We use Stefan's hardware design and provide an enhanced firmware implementation with advanced features including multi-core architecture, centralized display management, and comprehensive Home Assistant integration.
Access the thermostat's web interface by navigating to its IP address:

Status Tab: Real-time monitoring of:
Settings Tab: Complete configuration interface for:

Schedule Tab: Comprehensive 7-day scheduling:

System Tab: Device information and firmware updates
Automatic discovery and integration with Home Assistant:

Press and hold the boot button for more than 10 seconds while the thermostat is running to restore all settings to defaults.
This project is released under the GNU General Public License v3.0. Free to use, modify, and distribute.
Contributions welcome! Please:
Current Version: 1.4.001 (January 2026)
Hardware Design: Stefan Meisner - smart-thermostat
Alternative Firmware: Jonn Taylor - Enhanced firmware implementation
This project demonstrates the power of open-source collaboration - combining excellent hardware design with advanced firmware capabilities.
Created for the DIY smart home community
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4, H5, H6, H7, H8, H9 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R13, R14 |
| 6 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | 1N4148W | Diode_SMD:D_SOD-123 | D8, D9, D10, D11, D12 |
| 5 | 470 | Resistor_SMD:R_0603_1608Metric | R16, R17, R18, R19, R20 |
| 5 | UC2-3NJ | Custom Footprints:UC23NJ | K1, K2, K3, K4, K5 |
| 4 | +5V | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4, TP4, TP4, TP4 |
| 4 | LED | LED_SMD:LED_0805_2012Metric | D2, D5, D6, D7 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C8, C9, C15 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C14 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R8, R10 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 470uF | Capacitor_SMD:CP_Elec_10x10 | C10, C11 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 220 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 2K | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 3v3 | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | 470uH | Custom Footprints:IND_CDRH127_LDNP-470MC_SUM | L2 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C12 |
| 1 | 600ohm | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | 680uF | Capacitor_SMD:CP_Elec_16x17.5 | C13 |
| 1 | AHT20 | Custom Footprints:AHT20 | U4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Boot | Button_Switch_SMD:SW_SPST_TL3305A | SW2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | D_Zener | Diode_SMD:D_SMA | D1 |
| 1 | ESP32-S3-WROOM-1-N16 | Custom Footprints:XCVR_ESP32-S3-WROOM-1-N16R2 | U1 |
| 1 | GND | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP5 |
| 1 | LD2410 | Connector_PinSocket_1.27mm:PinSocket_1x05_P1.27mm_Vertical_SMD_Pin1Right | J4 |
| 1 | LDR07 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R12 |
| 1 | LM2596T-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U2 |
| 1 | MB6S | Diode_SMD:Diode_Bridge_Diotec_ABS | BR1 |
| 1 | MSP3218 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J7 |
| 1 | RC+RH | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Reset | Button_Switch_SMD:SW_SPST_TL3305A | SW1 |
| 1 | SCL | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | SDA | TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | SP0502BAHT | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | SS34 | Diode_SMD:D_SMA | D4 |
| 1 | Screw_Terminal_01x10 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-10-2.54_1x10_P2.54mm_Horizontal | J3 |
| 1 | UART PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
.kicad_pcb.jpg?size=s&soon)
jrtaylor71/Smart-Thermostat-Alt-Firmware
A comprehensive, feature-rich smart thermostat firmware for ESP32-S3 microcontrollers with touch display, web interface, and Home Assistant integration.


Camperlux/vancontroller
VanController: ESP32-S3 12 V campervan controller board (6 fused relays, 6 PWM dimmers, CAN, RS485, GPS) - KiCad 10 design, manufacturing files and enclosure. Free for non-commercial use.


Dizzerin/Rocket-Flight-Data-Computer
This project uses an STM32H743VGT6 MCU along with some innertial measurement units (IMU)s and barometric pressure sensors to and an SD card to record flight data from a model rocket and for later analysis, graphing, and…




It measures 101.5 × 83.4 mm and has 4 copper layers, 4.69 mm thick.
91 parts, built around the ESP32-S3-WROOM-1-N16, AHT20, LM2596T-5.0 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the jrtaylor71/Smart-Thermostat-Alt-Firmware repository on GitHub, at the commit this page was made from: the board is smart-thermostat-pcb/Thermostat.kicad_pcb and its schematic smart-thermostat-pcb/Thermostat-accessories.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask jrtaylor71 before reusing the design.