
Jeden board
Wojtekb30/Jeden-board
KiCad hardware project. A ATMega328P-based development board with Arduino Uno's functionality.

Blade PCB project
Blade is an open-source printed circuit board by JosephStew-art, from the JosephStew-art/Blade-PCB repository on GitHub. It is a 4-layer board of 50 × 111 mm with 118 parts on 113 nets, routed with 2,799 tracks and 325 vias.
It is built around the CH340C, ESP32-S3-WROOM-1-N16 and AMS1117, with the AP2112K-1.8, AT24C256CN and TXS0108EPW among its other parts. Its parts include 34 resistors, 33 capacitors, 13 connectors, 11 diodes and 9 ICs. It belongs with the ESP32 boards of this library.


| Qty | Value | Footprint | References |
|---|---|---|---|
| 23 | 100nF | PCM_JLCPCB:C_0402 | C10, C11, C12, C13, C14, C15, C16, C17, C19, C20, C22, C23, C24, C25, C26, C27 +7 |
| 13 | 10kΩ | PCM_JLCPCB:R_0805 | R6, R7, R12, R13, R14, R15, R16, R20, R26, R27, R28, R29, R32 |
| 6 | 10uF | PCM_JLCPCB:C_0603 | C1, C5, C6, C7, C18, C21 |
| 6 | 1kΩ | PCM_JLCPCB:R_0805 | R5, R19, R21, R23, R30, R31 |
| 6 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | LED4, LED5, LED6, LED7, LED8, LED9 |
| 4 | 4.7kΩ | PCM_JLCPCB:R_0805 | R8, R9, R10, R11 |
| 4 | 5.1kΩ | PCM_JLCPCB:R_0805 | R1, R2, R3, R4 |
| 2 | 1MΩ | PCM_JLCPCB:R_0805 | R888, R999 |
| 2 | 1x3 Conn | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J12, J13 |
| 2 | 1x4 Conn | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6, J9 |
| 2 | 4.7nF | PCM_JLCPCB:C_0805 | C888, C999 |
| 2 | BSS138 | PCM_JLCPCB:Q_SOT-23 | Q2, Q3 |
| 2 | MMBT3904LT1G | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 2 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | SJ1, SJ2 |
| 1 | 0603L050SLYR | Fuse:6V05APTC | F1 |
| 1 | 100kΩ | PCM_JLCPCB:R_0805 | R18 |
| 1 | 100mΩ | Resistor_SMD:R_2512_6332Metric | R_SHUNT1 |
| 1 | 100Ω | PCM_JLCPCB:R_0805 | R24 |
| 1 | 10Ω | PCM_JLCPCB:R_0805 | R17 |
| 1 | 1uF | PCM_JLCPCB:C_0603 | C9 |
| 1 | 1x2 Conn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | 1x6 Conn | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | 1x8 Conn | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | 22uF | PCM_JLCPCB:C_CASE-A-3216-18(mm) | C2 |
| 1 | 2x10 Conn | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J10 |
| 1 | 330Ω | PCM_JLCPCB:R_0805 | R25 |
| 1 | 47Ω | PCM_JLCPCB:R_0805 | R22 |
| 1 | 5025700893 | Connector_Card:MOLEX_5025700893 | J7 |
| 1 | AMS1117 | PCM_JLCPCB:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR | U3 |
| 1 | AP2112K-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | AT24C256C | PCM_JLCPCB:SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U7 |
| 1 | BACK | PCM_JLCPCB:SW_TS-1088-AR02016 | SW7 |
| 1 | BOOT | PCM_JLCPCB:SW_TS-1088-AR02016 | SW2 |
| 1 | BSI-10 | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW1 |
| 1 | CEM-1205-IC | Buzzer_Beeper:CEM-1205-IC | BZ1 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector:Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J3 |
| 1 | DOWN | PCM_JLCPCB:SW_TS-1088-AR02016 | SW5 |
| 1 | EN | PCM_JLCPCB:SW_TS-1088-AR02016 | SW3 |
| 1 | ESP | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J2 |
| 1 | ESP32-S3-WROOM-1-N16 | RF_Module:ESP32S3WROOM1N16 | U1 |
| 1 | Green | PCM_JLCPCB:D_0805 | D4 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | IRLML6344 | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | Power | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J1 |
| 1 | Red | PCM_JLCPCB:D_0603 | LED2 |
| 1 | SEL | PCM_JLCPCB:SW_TS-1088-AR02016 | SW6 |
| 1 | SI2301CDS-T1-GE3 | PCM_JLCPCB:Q_SOT-23 | Q1 |
| 1 | SOIC-8 Conn | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical_Counter_Clockwise | J8 |
| 1 | SS34 | PCM_JLCPCB:D_SMA | D2 |
| 1 | TSAL6200 | LED_THT:TSAL6200 | D1 |
| 1 | TSOP382xx | OptoDevice:Vishay_MINICAST-3Pin | U9 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U5 |
| 1 | UP | PCM_JLCPCB:SW_TS-1088-AR02016 | SW4 |
| 1 | W25Q128 | PCM_JLCPCB:SOIC-8_L5.3-W5.3-P1.27-LS8.0-BL | U6 |
| 1 | White | PCM_JLCPCB:D_0603 | D3 |

Wojtekb30/Jeden-board
KiCad hardware project. A ATMega328P-based development board with Arduino Uno's functionality.

jonghee-son/STM32F405_DevBoard
STM32 development board equipped with STM32F405RGT6

jonghee-son/STM32F103_DevBoard
Development board with STM32F103RBT6

vamshikrishnaramasamy/oso-keyboard
Generated from hardware/layout/oso75.layout.json and the PCB circuit netlists, then hand-finished for fabrication.

eshelton328/forge
Hardware design monorepo with software-grade CI/CD. KiCad PCB projects with automated ERC/DRC, multi-fab rule validation, schematic & BOM checks, and auto-generated board documentation.

Diegolox/MOUNTAIN_IN_THE_POCKET
Un dispositivo que va ayudar a muchos montañeros en sus expediciones.


It measures 50 × 111 mm and has 4 copper layers, 1.6 mm thick.
118 parts, built around the CH340C, ESP32-S3-WROOM-1-N16, AMS1117 and AP2112K-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JosephStew-art/Blade-PCB repository on GitHub, at the commit this page was made from: the board is Blade.kicad_pcb and its schematic Blade.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JosephStew-art before reusing the design.