

An STM32F407-based PLC runtime engine developed in Embedded C, together with a custom PLC controller PCB and a Renode-based simulation environment.
- Size
- 171.1 × 185.1 mm
- Copper layers
- 2
- Thickness
- 1.67 mm
- Parts
- 189
- Nets
- 243
- Pads
- 648
- Tracks, vias
- 1,077, 69
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Sep 2026
- Updated
- 4 Nov 2026
Overview
Mpuled is an open-source printed circuit board by abbounassima2, from the abbounassima2/STM32-PLC-Runtime-Engine-and-PCB repository on GitHub. It is a 2-layer board of 171.1 × 185.1 mm with 189 parts on 243 nets, routed with 1,077 tracks and 69 vias.
It is built around the MAX485ED, URB2405YMD-10WR3 and ADUM1201AR, with the LM321, XL4015E1 and BZX84C3V3 among its other parts. Its parts include 81 resistors, 33 capacitors, 29 ICs, 17 connectors and 10 diodes.
Main components
9MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsURB2405YMD-10WR3
DIP,25.4x25.4mm-40℃~+85℃ 1 1.5kV 10W 11mm 2200uF 25.4mm 25.4mm 250kHz 2A 50mVp-p 5V 85% 9V~36V Short Circuit Protection DIP,25.4x25.4mm Isolated Power Modules ROHSYLPTECIsolated Power ModulesADUM1201AR
SOIC-8-40℃~+105℃ 1 1 150ns 1Mbps 2 2.7V~5.5V 2.7V~5.5V 2500 25kV/us Bidirectional signal isolation、Multi-voltage domain interface、Power-on reset SOIC-8 Digital IsolatorsAnalog DevicesDigital IsolatorsLM321
SOT-23-50℃~+70℃ 1 2mV 3nA 400V/ms 40mA 430uA 45nA 90dB SOT-23-5 Operational Amplifier ROHSPJSEMIOperational AmplifierXL4015E1
TO-263-5-40℃~+125℃ 1 1.25V~32V 180kHz 5A 5mA 8V~36V Adjustable Buck Buck Built-in No TO-263-5 DC-DC Converters ROHSXLSEMIDC-DC ConvertersBZX84C3V3
SOT-23Zener DiodeshongjiachengIRLZ44N
TO-22055V 47A N-Channel HEXFET® Power MOSFETInfineon TechnologiesUncategorised330UF 25V 8*12
CAP-TH12mm 2000hrs@105℃ 25V 3.5mm 330uF 340mA@120Hz 8mm 插件,8x12mm Aluminum Electrolytic Capacitors - Leaded ROHSCXAluminum Electrolytic Capacitors - LeadedSS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdSTM32 PLC Runtime Engine and Hardware Design
An STM32F407-based PLC runtime engine developed in Embedded C, together with a custom PLC controller PCB and a Renode-based simulation environment.
The project focuses on designing a reusable PLC runtime platform rather than a single-purpose STM32 application. The architecture separates the permanent runtime, hardware abstraction, process image, communication, and user control logic.
Project Goal
The main objective is to develop an embedded PLC platform capable of providing the core functions of a programmable industrial controller:
- PLC operating modes
- Cyclic and periodic program execution
- Process-image based I/O
- Digital and analog I/O management
- Retentive PLC variables
- Industrial communication
- Runtime monitoring
- Real-time task management
- Custom PLC hardware
- Firmware simulation and testing
The long-term architecture is based on separating the permanent PLC runtime from the user program, providing the foundation for a configurable and programmable embedded PLC.
Runtime Execution and Validation
The following logs demonstrate PLC operating-mode transitions, power recovery handling, and runtime execution.
I/O Mapping Architecture
The following diagrams illustrate the input reading and output writing processes, including hardware-to-process-image mapping.
Parts
189| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 4N25 | Package_DIP:DIP-6_W7.62mm | U9, U10, U11, U12, U17, U18, U22, U23, U24, U25, U28, U29 |
| 9 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R28, R29, R30, R31, R32, R55, R58, R59, R63 |
| 9 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6, R8, R21, R22, R44, R51, R65, R72 |
| 8 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9, R13, R33, R36, R45, R60, R66, R79 |
| 8 | 2.4k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R41, R42, R52, R53, R61, R62, R74, R75 |
| 8 | 4.7K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R46, R47, R56, R57, R70, R71, R77, R78 |
| 7 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C23, C24, C29, C30, C31, C32, C33 |
| 6 | 10nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C7, C8, C25, C27 |
| 6 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R15, R16, R37, R39 |
| 6 | 1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C6, C16, C17, C21, C22 |
| 6 | 330 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R17, R18, R19, R20 |
| 4 | 0.1uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C13, C14, C26, C28 |
| 4 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4 |
| 4 | 2K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R23, R24, R25, R26 |
| 4 | ADuM1201AR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U8, U20, U21 |
| 4 | BZX84C3V3 | PCM_JLCPCB:D_SOT-23 | D7, D8, D9, D11 |
| 4 | FINDER-40.51 | Relay_THT:Relay_SPDT_Finder_40.51 | K1, K2, K3, K4 |
| 4 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q6, Q7, Q8, Q9 |
| 4 | PC817 | Package_DIP:DIP-4_W7.62mm | U1, U2, U6, U7 |
| 4 | ~ | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J3, J4, J5, J6 |
| 3 | 20k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R43, R54, R73 |
| 3 | 2N2222 | Package_TO_SOT_SMD:SOT-23W_Handsoldering | Q1, Q4, Q5 |
| 2 | 100 | Resistor_SMD:R_1206_3216Metric | R48, R68 |
| 2 | 100uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C15, C18 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C4, C5 |
| 2 | 160 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R10, R34 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R50, R69 |
| 2 | 2.2k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R27 |
| 2 | 200 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, R14 |
| 2 | 20K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R35 |
| 2 | 220uF/50V | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C9, C10 |
| 2 | 250 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R49, R67 |
| 2 | 2N2222 | PCM_JLCPCB:Q_SOT-23 | Q3, Q10 |
| 2 | 330uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C11, C12 |
| 2 | 330uF/25V | Capacitor_THT:C_Radial_D10.0mm_H12.5mm_P5.00mm | C19, C20 |
| 2 | 4.7k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R80, R81 |
| 2 | 47uH/5A | Inductor_THT:L_Axial_L14.5mm_D5.8mm_P20.32mm_Horizontal_Fastron_HBCC | L1, L2 |
| 2 | Conn_02x22_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x22_P2.54mm_Vertical | J9, J12 |
| 2 | LM321 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U4, U13 |
| 2 | MCP6001-OT | Package_TO_SOT_SMD:SOT-23-5 | U19, U27 |
| 2 | OPA197xD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U14 |
| 2 | SS54 | PCM_JLCPCB:D_SMA | D5, D6 |
| 2 | SW_Omron_B3FS | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1, SW2 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J13, J14 |
| 2 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J1, J2 |
| 2 | XL4015 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U15, U16 |
| 1 | 120 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R76 |
| 1 | 20k | Resistor_SMD:R_1206_3216Metric | R64 |
| 1 | 24VDC | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 1 | 2N2222 | Package_TO_SOT_SMD:TSOT-23_HandSoldering | Q2 |
| 1 | 3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R38 |
| 1 | 8.2K | PCM_JLCPCB:R_1206 | R40 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U26 |
| 1 | Screw_Terminal_01x05 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal | J7 |
| 1 | Screw_Terminal_01x09 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-9-5.08_1x09_P5.08mm_Horizontal | J15 |
| 1 | URB2405YMD-10WR3 | Converter_DCDC:Converter_DCDC_XP_POWER-IAxxxxS_THT | PS1 |
| 1 | ~ | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal | J16 |
| 1 | ~ | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J17 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J10 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J11 |
Similar boards
- 2 layers90 × 88.4 mm

- 2 layers99.9 × 99.9 mm

- 2 layers76.2 × 62.9 mm

Controller board
kercle/microscopy
A small microscope automation project with a nice UI and processing capabilities (for now in particular focus stacking).
18 parts - 2 layers121.5 × 92.5 mm

50W 24-5V Buck OMER 260720V1
yukselturkomer/50w-buck-converter-stm32
Bu proje, STM32 mikrodenetleyici kullanılarak geliştirilmiş 50W kapasiteli bir Buck (Düşürücü) Konvertör sistemini ve bu sistemin kontrolünü sağlayan Nextion HMI (İnsan-Makine Arayüzü) tasarımını içermektedir.
89 parts - 2 layers100 × 100 mm

- 2 layers76 × 45.2 mm

- 2 layers100 × 50 mm

Pd power supply
ziteh/pd-power-supply
Adjustable power supply based on USB PD (WIP)
110 partsCERN-OHL-P-2.0 - 2 layers80.9 × 92.7 mm

Evo Borne
SRA-VJTI/Evo-Borne
This repository focuses on building an open-source morphobot.
126 parts12MIT
Questions
How big is the Mpuled PCB?
It measures 171.1 × 185.1 mm and has 2 copper layers, 1.67 mm thick.
What parts does the Mpuled use?
189 parts, built around the MAX485ED, URB2405YMD-10WR3, ADUM1201AR and LM321. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mpuled KiCad files?
From the abbounassima2/STM32-PLC-Runtime-Engine-and-PCB repository on GitHub, at the commit this page was made from: the board is PCB/mpuled.kicad_pcb and its schematic PCB/mpuled.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mpuled design in my own project?
Its repository states no licence, so its author keeps all rights: ask abbounassima2 before reusing the design.